Soldering iron

A soldering iron is a hand tool used in soldering. It supplies heat to melt solder so that it can flow into the joint between two workpieces.

Electric soldering iron
A gas-fired soldering iron
Spool of solder. 1.6mm.

A soldering iron is composed of a heated metal tip and an insulated handle. Heating is often achieved electrically, by passing an electric current (supplied through an electrical cord or battery cables) through a resistive heating element. Cordless irons can be heated by combustion of gas stored in a small tank, often using a catalytic heater rather than a flame. Simple irons less commonly used today than in the past were simply a large copper bit on a handle, heated in a flame.

Solder melts at approximately 185°C (365°F). Soldering irons are designed to reach a temperature range of 200°-480°C (392°-896° F).

Soldering irons are most often used for installation, repairs, and limited production work in electronics assembly. High-volume production lines use other soldering methods.[1] Large irons may be used for soldering joints in sheet metal objects. Less common uses include pyrography (burning designs into wood) and plastic welding.

History

In 1894, the American Electrical Heater Company began manufacturing electrical soldering irons on a large scale in Detroit. They started producing them shortly after American Beauty released their line of soldering irons.

The issue of April 1905, of Scientific American Magazine, explains how to build one in the article "How to Make an Electric Soldering Iron" [2]

In 1921, a German company founded by Ernst Sachs developed an electrical soldering iron similar to American Electrical Heater Company iron.[3]

Types
Soldering iron in use

Simple iron

For electrical and electronics work, a low-power iron, a power rating between 15 and 35 watts, is used. Higher ratings are available, but do not run at higher temperature; instead there is more heat available for making soldered connections to things with large thermal capacity, for example, a metal chassis.[4] Some irons are temperature-controlled, running at a fixed temperature in the same way as a soldering station, with higher power available for joints with large heat capacity. Simple irons run at an uncontrolled temperature determined by thermal equilibrium; when heating something large their temperature drops.

Cordless iron

Small irons heated by a battery, or by combustion of a gas such as butane in a small self-contained tank, can be used when electricity is unavailable or cordless operation is required. The operating temperature of these irons is not regulated directly; gas irons may change power by adjusting gas flow. Gas-powered irons may have interchangeable tips including different size soldering tips, hot knife for cutting plastics, miniature blow-torch with a hot flame, and small hot air blower for such applications as shrinking heat shrink tubing.

Temperature-controlled soldering iron

Simple soldering irons reach a temperature determined by thermal equilibrium, dependent upon power input and cooling by the environment and the materials it comes into contact with. The iron temperature will drop when in contact with a large mass of metal such as a chassis; a small iron will lose too much temperature to solder a large connection. More advanced irons for use in electronics have a mechanism with a temperature sensor and method of temperature control to keep the tip temperature steady; more power is available if a connection is large. Temperature-controlled irons may be free-standing, or may comprise a head with heating element and tip, controlled by a base called a soldering station, with control circuitry and temperature adjustment and sometimes display.

A variety of means are used to control temperature. The simplest of these is a variable power control, much like a light dimmer, which changes the equilibrium temperature of the iron without automatically measuring or regulating the temperature. Another type of system uses a thermostat, often inside the iron's tip, which automatically switches power on and off to the element. A thermal sensor such as a thermocouple may be used in conjunction with circuitry to monitor the temperature of the tip and adjust power delivered to the heating element to maintain a desired temperature.[4][5] In some models, the firmware for the control circuitry is free software that can be modified by the end-user.[6][7][8]

Another approach is to use magnetized soldering tips which lose their magnetic properties at a specific temperature, the Curie point. As long as the tip is magnetic, it closes a switch to supply power to the heating element. When it exceeds the design temperature it opens the contacts, cooling until the temperature drops enough to restore magnetisation. More complex Curie-point irons circulate a high-frequency AC current through the tip, using magnetic physics to direct heating only where the surface of the tip drops below the Curie point.[9]

Soldering station
Temperature-controlled soldering station

A soldering station has a temperature control and consists of an electrical power supply, control circuitry with provision for user adjustment of temperature and display, and a soldering iron or soldering head with a tip temperature sensor. The station will normally have a stand for the hot iron when not in use, and a wet sponge for cleaning. It is most commonly used for soldering electronic components. Other functions may be combined; for example a rework station, mainly for surface-mount components may have a hot air gun, vacuum pickup tool, and a soldering head; a desoldering station will have a desoldering head with vacuum pump for desoldering through-hole components, and a soldering iron head.

Soldering tweezers
Soldering tweezers in use

For soldering and desoldering small surface-mount components with two terminals, such as some links, resistors, capacitors, and diodes, soldering tweezers can be used; they can be either free-standing or controlled from a soldering station. The tweezers have two heated tips mounted on arms whose separation can be manually varied by squeezing gently against spring force, like simple tweezers; the tips are applied to the two ends of the component. The main purpose of the soldering tweezers is to melt solder in the correct place; components are usually moved by simple tweezers or vacuum pickup.

Hot knife

A hot knife is a form of soldering iron equipped with a double-edged blade that is situated on a heating element. These tools can reach temperatures of up to 1,000 degrees Fahrenheit (538 degrees Celsius) allowing for cuts of fabric and foam materials without worry of fraying or beading. Hot knives can be utilized in automotive, marine, and carpeting applications, as well as other industrial and personal uses.[10]

Stands
Soldering iron stand

A soldering iron stand keeps the iron away from flammable materials, and often also comes with a cellulose sponge and flux pot for cleaning the tip. Some soldering irons for continuous and professional use come as part of a soldering station, which allows the exact temperature of the tip to be adjusted, kept constant, and sometimes displayed.

Tips

Choosing a soldering tip at Wikibooks

Used plated tip with remains of solder flux

Most soldering irons for electronics have interchangeable tips, also known as bits, that vary in size and shape for different types of work.[11][12][4] Common tip shapes include: bevel (aka "hoof", especially if featuring concavity[13]),[14][15] chisel,[14][15] and conical.[14][15]

Pyramid tips with a triangular flat face and chisel tips with a wide flat face are useful for soldering sheet metal. Fine conical or tapered chisel tips are typically used for electronics work. Tips may be straight or have a bend. Concave or wicking tips with a chisel face with a concave well in the flat face to hold a small amount of solder are available.[16][17] Tip selection depends upon the type of work and access to the joint; soldering of 0.5mm pitch surface-mount ICs, for example, is quite different from soldering a through-hole connection to a large area. A concave tip well is said to help prevent bridging of closely spaced leads; different shapes are recommended to correct bridging that has occurred.[18] Due to patent restrictions not all manufacturers offer concave tips everywhere; in particular there are restrictions in the USA.[18]

Older and very cheap irons typically use a bare copper tip, which is shaped with a file or sandpaper. This dissolves gradually into the solder, suffering pitting and erosion of the shape. Copper tips are sometimes filed when worn down. Iron-plated copper tips have become increasingly popular since the 1980s. Because iron is not readily dissolved by molten solder, the plated tip is more durable than a bare copper one, though it will eventually wear out and need replacing. This is especially important when working at the higher temperatures needed for modern lead-free solders. Solid iron and steel tips are seldom used because they store less heat, conduct it poorly, and rusting can break the heating element.

Iron-plated tips may feature a layer of nickel between the copper core and the iron surface.[11] A nickel-chrome outer plating may be used further back from the very tip, as solder does not stick well to this material: this avoids solder wetting parts of the tip where it would be unwanted.[11]

Some tips have a heater and a thermocouple-based temperature sensor embedded to facilitate a more precise temperature control (TS100 and T12, for instance).

Cleaning

When the iron tip oxidises and burnt flux accumulates on it, solder no longer wets the tip, impeding heat transfer and making soldering difficult or impossible; tips must be periodically cleaned in use. Such problems happen with all kinds of solder, but are much more severe with the lead-free solders which have become widespread in electronics work, which require higher temperatures than solders containing lead. Exposed iron plating oxidises; if the tip is kept tinned with molten solder oxidation is inhibited. A clean unoxidised tip is tinned by applying a little solder and flux.

A wet small sponge, often supplied with soldering equipment, can be used to wipe the tip. For lead-free solder a slightly more aggressive cleaning, with brass shavings, can be used. Soldering flux will help to remove oxide; the more active the flux the better the cleaning, although acidic flux used on circuit boards that is not carefully cleaned off will cause corrosion. A tip which is cleaned but not retinned is susceptible to oxidation.

Soldering iron tips are made of a copper core plated with iron. The copper is used for heat transfer and the iron plating is used for durability. Copper is very easily corroded, eating away the tip, particularly in lead-free work; iron is not. Cleaning tips requires the removal of oxide without damaging the iron plating and exposing the copper to rapid corrosion. The use of solder already containing a small amount of copper can slow corrosion of copper tips.

In cases of severe oxidation not removable by gentler methods, abrasion with something hard enough to remove oxide but not so hard as to scratch the iron plating can be used. A brass wire scourer, brush, or wheel on a bench grinder, can be used with care. Sandpaper and other tools may be used but are likely to damage the plating.

Electro-static discharge

Not all soldering irons are ESD-safe.

Although some manufacturers' mains-powered models are built with the element shaft (and hence the tip) electrically connected to ground via the iron's mains lead,[19] other models' tips may float at arbitrary voltages unless an additional grounding wire is used.[6]

See also

References
  1. Bralla, James G. Handbook of Manufacturing Processes - How Products, Components and Materials are Made Industrial Press, 2007 page 297
  2. "How to Make an Electric Soldering Iron". April 1905.
  3. "History 101 - The Modern Soldering Iron". November 29, 2018.
  4. Winstanley, Alan, The Basic Soldering Guide, archived from the original on 2010-01-18, retrieved 2010-04-14.
  5. "What is the TS100 Soldering Iron?".
  6. "Review: TS100 Soldering Iron". 24 July 2017.
  7. "Tetris on a Soldering Iron". 7 July 2017.
  8. "Play the Tiniest Version of 'Tetris' on a Soldering Iron". 7 July 2017.
  9. "Thermaltronics Soldering: Products > TMT-9000S Soldering and Rework Station". Thermaltronics.com. Retrieved 27 August 2018.
  10. "What is a Hot Knife? - MM Newman Corporate". MM Newman Corporation. Retrieved 2016-01-14.
  11. "Soldering Tips" (PDF). Userwww.sfsu.edu. Retrieved 27 August 2018.
  12. "Archived copy". Archived from the original on 2015-05-26. Retrieved 2018-12-01.CS1 maint: archived copy as title (link)
  13. "Uses of Different Soldering Iron Tips". Instructables.com. Retrieved 27 August 2018.
  14. "Understanding Different Soldering Iron Tips - Make". Makezine.com. Retrieved 27 August 2018.
  15. "How to Solder: Through-Hole Soldering". Learn.sparkfun.com. Retrieved 27 August 2018.
  16. "Hakko FX-888 Tips - Page 1". Eevblog.com. Retrieved 27 August 2018.
  17. "Soldering Tip Series 832". Ersa.com. Retrieved 27 August 2018.
  18. "HAKKO - Select Tip Shape - Drag soldering". Hakko.com. Retrieved 27 August 2018.
  19. "FAQ's". Antex (Electronics) Limited. Retrieved 2018-08-28. [It] is appropriate to routinely test mains powered irons and stations... Guidance values for the tester settings [include:] Earth Bond Test ... pass result: < 0.1 Ohm ... A higher reading (i.e. up to 0.5 Ohm) can still be regarded as safe because the earth connection from the plug to the element shaft is welded or soldered throughout...
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.