Sonata 6.7
The Sonata 6.7 is a sailboat, that was designed by American Gary Mull and first built in 1986. The design is out of production.[1][2]
| Development | |
|---|---|
| Designer | Gary Mull |
| Location | United States |
| Year | 1986 |
| No. built | 40 |
| Builder(s) | Sonata Yachts |
| Boat | |
| Boat weight | 2,544 lb (1,154 kg) |
| Hull | |
| Type | Monohull |
| Construction | Fiberglass |
| LOA | 21.98 ft (6.70 m) |
| LWL | 19.36 ft (5.90 m) |
| Beam | 8.20 ft (2.50 m) |
| Hull draft | 4.92 ft (1.50 m) |
| Hull appendages | |
| Keel/board type | fin keel |
| Ballast | 952 lb (432 kg) |
| Rudder(s) | internally-mounted spade-type rudder |
| Rig | |
| General | Fractional rigged sloop |
| I (foretriangle height) | 24.74 ft (7.54 m) |
| J (foretriangle base) | 7.74 ft (2.36 m) |
| P (mainsail luff) | 27.10 ft (8.26 m) |
| E (mainsail foot) | 9.48 ft (2.89 m) |
| Sails | |
| Mainsail area | 128.45 sq ft (11.933 m2) |
| Jib/genoa area | 95.74 sq ft (8.895 m2) |
| Total sail area | 224.20 sq ft (20.829 m2) |
The boat was built by Sonata Yachts in Australia, who completed 40 examples.[1]
Design
The Sonata 6.7 is a small recreational keelboat, built predominantly of fiberglass. It has a fractional sloop rig, an internally-mounted spade-type rudder and a fixed fin keel. It displaces 2,544 lb (1,154 kg) and carries 952 lb (432 kg) of ballast.[1]
The boat has a draft of 4.92 ft (1.50 m) with the standard keel. There was a lifting keel version produced as well.[1]
See also
- Similar sailboats
References
- Browning, Randy (2016). "Sonata 6.7 sailboat specifications and details". sailboatdata.com. Retrieved 2 October 2016.
- Browning, Randy (2016). "Garry Mull (1939-1994)". sailboatdata.com. Retrieved 2 October 2016.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.