Hunter 25-2

The Hunter 25-2, sometimes referred to as the Hunter 25-2005, is an American trailerable sailboat that was designed by Glenn Henderson as a cruiser and first built in 2005.[1][2][3]

Hunter 25-2
Hunter 25-2 with sails reefed in higher winds. The forward cabin ports are fitted with covers.
Development
DesignerGlenn Henderson
LocationUnited States
Year2005
Builder(s)Hunter Marine
Boat
Boat weight3,700 lb (1,678 kg)
Draft2.00 ft (0.61 m)
Hull
TypeMonohull
ConstructionFiberglass
LOA24.50 ft (7.47 m)
LWL22.08 ft (6.73 m)
Beam8.46 ft (2.58 m)
Engine typeOutboard motor
Hull appendages
Keel/board typeshoal draft fin keel
Ballast1,309 lb (594 kg)
Rudder(s)transom-mounted rudder
Rig
Rig typeB&R rig
I (foretriangle height)25.00 ft (7.62 m)
J (foretriangle base)8.50 ft (2.59 m)
P (mainsail luff)23.42 ft (7.14 m)
E (mainsail foot)9.50 ft (2.90 m)
Sails
SailplanMasthead sloop
Mainsail area111.25 sq ft (10.335 m2)
Jib/genoa area106.25 sq ft (9.871 m2)
Total sail area217.50 sq ft (20.206 m2)

The Hunter 25-2 replaced the Hunter 240 and 260 in the company product line.[1]

The design was originally marketed by the manufacturer as the Hunter 25, but is now usually referred to as the Hunter 25-2, or 25-2005, to differentiate it from the unrelated 1972 Hunter 25 design.[1][4]

Production

The design was built by Hunter Marine in the United States from 2005 until 2009, but production ended during the Great Recession.[1][3][5]

Design

Hunter 25-2 showing rudder and walk-through transom
Hunter 25-2, showing forward cabin ports

The Hunter 25-2 is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a B&R masthead sloop rig with aluminum spars, a raked stem, a walk-through, rounded reverse transom, a transom-hung rudder controlled by a wheel and a fixed fin shoal draft keel. It displaces 3,700 lb (1,678 kg) and carries 1,309 lb (594 kg) of lead ballast.[1][3]

The boat has a draft of 2.00 ft (0.61 m) with the standard shoal draft keel, allowing ground transportation on a trailer.[1]

The boat is normally fitted with a small outboard motor of up to 10.0 hp (7 kW) for docking and maneuvering.[1]

The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin and an aft cabin with a double berth under the cockpit. The galley is located on the starboard side just forward of the companionway ladder. The head is located on the port side, beside the companionway steps. The main cabin has a drop-leaf table and two straight seats that each accommodate two people. The cabin has forward-facing rectangular ports. The fresh water tank has a capacity of 10 U.S. gallons (38 L; 8.3 imp gal).[1][2]

See also

Related development

Similar sailboats

References

  1. McArthur, Bruce (2020). "Hunter 25-2 sailboat". sailboatdata.com. Archived from the original on 30 July 2020. Retrieved 30 June 2020.
  2. Hunter Marine (2005). "Hunter 25 brochure" (PDF). marlow-hunter.com. Archived (PDF) from the original on 3 August 2017. Retrieved 2 August 2017.
  3. "Hunter 25-2005". Boat-Specs.com. 15 April 2020. Archived from the original on 30 July 2020. Retrieved 30 July 2020.
  4. Browning, Randy (2020). "Hunter 25 sailboat specifications and details". sailboatdata.com. Archived from the original on 30 July 2020. Retrieved 30 July 2020.
  5. McArthur, Bruce (2020). "Hunter Marine". sailboatdata.com. Archived from the original on 30 July 2020. Retrieved 30 July 2020.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.