South African type MY tender

The South African type MY tender was a steam locomotive tender.

South African type MY tender
Type MY tender on Class 24, 2009
Type and origin
LocomotiveClass 24
DesignerSouth African Railways
(Dr. M.M. Loubser)
BuilderNorth British Locomotive Company
In service1949
Specifications
Configuration3-axle bogies
Gauge3 ft 6 in (1,067 mm) Cape gauge
Length34 ft 3 14 in (10,446 mm)
BogiesBuckeye
Wheel dia.34 in (864 mm)
Wheelbase24 ft 7 14 in (7,499 mm)
  Bogie8 ft 8 in (2,642 mm)
Axle load9 LT 10 cwt (9,652 kg)
  Front bogie28 LT 1 cwt (28,500 kg)
  Rear bogie28 LT 10 cwt (28,960 kg)
Weight empty61,500 lb (27,900 kg)
Weight w/o56 LT 11 cwt (57,460 kg)
Fuel typeCoal
Fuel cap.9 LT (9.1 t)
Water cap.4,520 imp gal (20,550 l)
StokingManual
CouplersDrawbar & AAR knuckle
Career
OperatorsSouth African Railways
NumbersSAR 3601-3700
NicknamesTorpedo

Type MY tenders entered service in 1949 and 1950, as tenders to the Class 24 2-8-4 Berkshire type branchline steam locomotives which entered service on the South African Railways in that year.[1][2][3][4]

Manufacturer

Type MY tenders were built in 1949 by North British Locomotive Company.[1]

The Class 24 2-8-4 Berkshire type steam locomotive was designed by Dr. M.M. Loubser, Chief Mechanical Engineer of the South African Railways (SAR) from 1939 to 1949, to replace the old Classes 6, 7 and 8 locomotives in branchline service on light rail in South Africa and especially in South West Africa. The Type MY entered service as tenders to these locomotives.[1][5][6]

Characteristics

The tender had a coal capacity of 9 long tons (9.1 tonnes), a water capacity of 4,520 imperial gallons (20,500 litres) and a maximum axle loading of 9 long tons 10 hundredweight (9,652 kilograms).[1][3][4]

Buckeye bogie

It was a tank wagon type tender, similar in appearance to the North American Vanderbilt type tender, with a cylindrical water tank which had an inside diameter of 6 feet 5 34 inches (1,975 millimetres). The tender was similar to the Type MX tender, but its wheelbase was 10 feet 1 34 inches (3,092 millimetres) shorter. Like the Type MX tender, it rode on three-axle Buckeye bogies, supplied by General Steel Castings of Eddystone, Pennsylvania, and became commonly known as a Torpedo tender. Like its engine, the tender was equipped with vacuum brakes.[1][2][3][4][5]

Locomotive

Only the Class 24 locomotives were delivered new with Type MY tenders, which were numbered in the range from 3601 to 3700 for their engines. An oval number plate, bearing the engine number and often also the tender type, was attached to the rear end of the tenders.[1][3][4]

Classification letters

Since many tender types are interchangeable between different locomotive classes and types, a tender classification system was adopted by the SAR. The first letter of the tender type indicates the classes of engines to which it could be coupled. The "M_" tenders could be used with the locomotive classes as shown, although in some cases, engine drawbars and intermediate emergency chains had to be replaced or adjusted to suit the target locomotive.[3][4]

The second letter indicates the tender's water capacity. The "_Y" tenders had a capacity of between 4,500 and 4,520 imperial gallons (20,460 and 20,550 litres; 5,404 and 5,428 US gallons).[3][4]

A number, when added after the letter code, indicates differences between similar tender types, such as function, wheelbase or coal bunker capacity.[4]

Illustration

References

  1. Holland, D. F. (1972). Steam Locomotives of the South African Railways. 2: 1910-1955 (1st ed.). Newton Abbott, Devon: David & Charles. pp. 105–107. ISBN 978-0-7153-5427-8.
  2. Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. p. 76. ISBN 0869772112.
  3. South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 3'6" Gauge/Spoorwydte. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. pp. VIII, 46.
  4. South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 2'0" & 3'6" Gauge/Spoorwydte, Steam Locomotives/Stoomlokomotiewe. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. pp. VIII, 6a-7a, 28A, 46.
  5. Espitalier, T.J.; Day, W.A.J. (1947). The Locomotive in South Africa - A Brief History of Railway Development. Chapter VII - South African Railways (Continued). South African Railways and Harbours Magazine, May 1947. pp. 403-404.
  6. North British Locomotive Company works list, compiled by Austrian locomotive historian Bernhard Schmeiser
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.