Test tube brush

A test tube brush or spout brush is a brush used for cleaning test tubes and narrow mouth laboratory glassware,[1] such as graduated cylinders, burettes, and Erlenmeyer flasks. It is composed of nylon, synthetic, or animal fur bristles of various diameters lined against a rather sturdy wire handle with a looped end for hanging. The wire can be made from a wide range of metals, such as aluminium, bronze, beryllium, copper, and brass.[2] FDA grade brushes are designed to be resistant to acid and other corrosive chemicals, including aromatic and aliphatic hydrocarbons, ketones, ethyl acetate esters,and trichloroethylene.

Laboratory test tube brushes: small sized brushes on the left, large sized brushes on the right.

Sizes

Test tube brushes come in sizes with the brushes themselves varying from 10–2,000mm in length and 3–200mm in diameter.[2] For example:

Small test tube brush fitting compared to a regular laboratory test tube.
Brush lengthBrush diameterOverall length
75 mm (3")12 mm (0.5")200 mm (8")
90 mm (3.5")20 mm (0.75")230 mm (9")
100 mm (4")35 mm (13/8")275 mm (11")
115 mm (4.5")40 mm (15/8")330 mm (13")

Types of brushes
Demonstration of test tube cleaning by using a small sized test tube brush.

Brushes are designed for the purpose of cleaning test tubes, therefore are developed to be able to reach all corners of the glassware.[3]

Tip typeDescription
Radial tipRound tufted tip allows for a curved brush edge, protecting the glassware from contact against the twisted metal wire handle.[4]
Stainless steel wire stem radial tipSimilar to radial tip brushes, but more durable and efficient in glassware cleaning.[3]
Tied tipBristles are tied together at the tip to facilitate the cleaning of tubes and bottles with narrow openings, capable of expanding at the bottom of the tube without scratching the surface.[3]
Sponge tipThe soft tip enables expansion and absorption of liquid, which results in more thorough cleaning of the tube and protection from scratches.[3]

Babcock test bottle brush

A Babcock test bottle brush is a specialised test tube brush designed for cleaning bottle neck flasks. It has an extra long radial bristle tip that is flexible enough to enter the narrow neck of various laboratory glassware, and fan out at the bottom of the chamber for efficient cleaning. The middle section of the metal wire handle contains short stemmed bristles that can be used to scrub along the neck of the flask.[5]

Adjustable test tube brush

The adjustable brush contains a stiff, bendable twisted wire core that forms a loop in the middle, allowing the brush to be adjusted to fit different sized test tubes.[6]

Brush length Brush diameter (adjustable) Overall length
175 mm (7") 25 mm (1") minimum 275 mm (9")

See also

References
  1. "Fan Tip Tube Brushes". Thomas Scientific. Thomas Scientific. Retrieved 4 February 2016.
  2. Aggarwal, Chaitanya. "Chemistry Lab Instruments". Rac Exports. IndiaMART IndiaMESH Limited. Retrieved 4 February 2016.
  3. "Nylon Sponge Tube Brush, 10" Handle, 3"L x 1.5" Dia Brush; 12/Pk". Cole-Parmer® Fluid-handling and Analysis. Chemoscience (Thailand) Co., Ltd. Retrieved 4 February 2016.
  4. "Test Tube Brushes, Radial Tip". VWR® We Enable Science. VWR. Retrieved 4 February 2016.
  5. "Babcock Cream Test Bottle Brush". VWR® We Enable Science. VWR. Retrieved 4 February 2016.
  6. "Adjustable Test Tube Brush". Laboratory Sales & Service LLC. Laboratory Sales and Service LLC. 2009. Retrieved 4 February 2016.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.