Thallium triiodide

Thallium triiodide is a chemical compound of thallium and iodine with formula TlI3. Unlike the other thallium trihalides, which contain thallium(III), TlI3 is a thallium(I) salt and contains the triiodide ion, I3.

Thallium triiodide
Names
IUPAC name
thallium(I) (triiodide)
Other names
thallous triiodide
Identifiers
3D model (JSmol)
ChemSpider
EC Number
  • 236-627-3
Properties
I3Tl
Molar mass 585.09 g·mol−1
Hazards
GHS pictograms
GHS Signal word Danger
H300, H330, H373, H411
NFPA 704 (fire diamond)
Flammability (red): no hazard codeHealth code 4: Very short exposure could cause death or major residual injury. E.g. VX gasReactivity (yellow): no hazard codeSpecial hazards (white): no code
4
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Y verify (what is YN ?)
Infobox references

An appreciation as to why Tl+ is not oxidised to Tl3+ in the reaction:

Tl3+ + 2 I → Tl+ + I2

can be gained by considering the standard reduction potentials of the half cells which are:

Tl3+ + 2
e
→ Tl+; Er° = 1.252
I2 + 2
e
→ 2 I; Er° = 0.5355

The favoured reaction is therefore the reduction of Tl3+ (1.252 > 0.5355).

Using standard electrode potentials in this way must be done with caution as factors such as complex formation and solvation may affect the reaction. TlI3 is no exception as it is possible to stabilise thallium(III) with excess I forming the TlI4 ion (isoelectronic with the tetraiodomercurate anion and with lead(IV) iodide).

Structure and preparation

TlI3 is formulated Tl+ I3, and has a similar structure to NH4I3, CsI3 and RbI3.[1] The triiodide ion in TlI3 is nearly linear but is asymmetric with one iodineiodine bond longer than the other. For comparison the dimensions of the tri-iodide, IaIbIc, ions in the different compounds are shown below:

compound IaIb (pm) Ib - Ic (pm) angle (°)
TlI3 306.3 282.6 177.90
RbI3 305.1 283.3 178.11
CsI3 303.8 284.2 178.00
NH4I3 311.4 279.7 178.55

TlI3 can be prepared by the evaporation of stoichiometric quantities of TlI and I2 in concentrated aqueous HI, or by reacting TlI with I2 in ethanol.

References

  • WebElements
  • Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8.
  1. Die Kristallstrukturen von Rubidiumtriiodid und Thalliumtriiodid Tebbe K.F., Georgy U Acta Crystallographica,C (1986) 42, 1675 doi:10.1107/S0108270186090972
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.