Chevrolet Eagle

The Chevrolet Eagle (Series CA) is an American vehicle manufactured by Chevrolet in 1933 to replace the 1932 Series BA Confederate. The Eagle was produced early in the 1933 production year. When it was joined by the cheaper Chevrolet Mercury later in 1933 the Eagle name was changed to Master to provide Chevrolet with a two-car range, and the first time in ten years they manufactured two models on different wheelbases. The Mercury was also known as the Standard series.[1] Starting in 1929, GM introduced the short lived General Motors Companion Make Program where Oakland, Oldsmobile, Buick and Cadillac had "junior" models added to each division, but weren't labeled according to their "senior" brand. The only division that didn't get a "junior" brand was Chevrolet. Two different models were introduced as Chevrolet to determine which one the market liked better, and sold better.

Chevrolet Eagle and Master
Overview
ManufacturerChevrolet (General Motors)
Also called
  • Eagle and Master, series CA
  • Mercury or Standard, series CC
Production450,435 (Eagle and Master)
35,845 (Mercury or Standard)
Model years1933
AssemblyOakland Assembly, Oakland, California
North Tarrytown Assembly, Tarrytown, New York
Flint Assembly, Flint, Michigan
Norwood Assembly, Norwood, Ohio
St. Louis Assembly, St. Louis, Missouri
Oshawa Assembly, Oshawa, Ontario Canada
Osaka Assembly, Osaka, Japan
General Motors South Africa, Port Elizabeth, South Africa
GM Argentina, Buenos Aires, Argentina
GM Belgium, Antwerp, Belgium
Body and chassis
LayoutFR layout
PlatformGM A platform
RelatedChevrolet Mercury
Chevrolet Suburban
Powertrain
Engine206 cu in (3.4 L) 6-cylinder
Dimensions
Wheelbase110 in (2,794.0 mm)
Curb weight2,675–2,880 lb (1,213–1,306 kg)
Chronology
PredecessorChevrolet Series BA Confederate
SuccessorChevrolet Master and Standard

Total the earlier Eagle and later Master combined sold 450,435 vehicles, an increase of nearly 140,000 the previous year's Series BA sales of 313,395, and ensured that Chevrolet was able to retain their number one spot in American car sales. The Eagle saw the end of two-seater cars from Chevrolet, and the new Town Sedan included an integral trunk.

1933 Chevrolet trucks at Yellowstone

There are several differences between the Eagle and Master. The easiest to identify is the post between the front door wing windows and the roll down windows. On the Eagle the chrome divider between these two windows goes down as the window goes down, where as on the Master this divider remains fixed and does not go down with the window. The Eagle and Master's wheelbase increased an inch to 110 in (2,794.0 mm) compared to the Series BA, and was three inches longer than the new Mercury.

It was powered by a larger version of the "Stovebolt Six", 206 cu in (3,380 cc) six-cylinder engine, producing 65 hp (48 kW).[2] A smaller 181 cu in (2,970 cc) six-cylinder was used in the Mercury, producing 60 hp (45 kW)

GM also used the Eagle chassis and platform for trucks branded as both Chevrolet and GMC.

References

Notes
  1. "1933 Chevrolet Eagle and Mercury". How Stuff Works. Retrieved 3 January 2013.
  2. "1933 Chevrolet Master Eagle Series CA Cabriolet". Bonhams. Retrieved 3 January 2013.
Sources
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.