EMD GT22 Series

With the introduction of the 645 engine for export models in 1967, the model designation numbers changed by adding 10 to the designation of a similar model (For example: the G12 now became the G22). To meet customer demands of a six axle version of the popular G12, EMD created the GR12 which was slightly longer and taller to accommodate the Type-C trucks.

EMD then designed the GT22 model to accommodate the HT-C truck first found on the American EMD SD45X. Extending the carbody and increasing the fuel tank capacity, the GT22C series was introduced. Production spanned longer than the four axle G22 version, but with smaller orders.

Several models were introduced:

• GT22CW
• GT22CU
• GT22CW-2
• GT22HW-2
• GT22CUM-1
• GT22CUM-2
• GT22LC
• GT22LC-2

The EMD GT22CW was first appeared in 1972 and now carried a CW suffix which indicated that this model had six axles (C) and traction motors that could fit from 1,435 mm (4 ft 8 ¹⁄₂ in) standard gauge to 5 ft 6 in (1,676 mm) gauge tracks (W). Another new suffix introduced to this model was the T, which indicated the use of a turbocharger.

The GT22CW found most of its popularity in Argentina, while two unusual orders went to the Saudi Railways Organization in Saudi Arabia & the Société Nationale des Transports Ferroviaires of Algeria.

Production spanned from July 1972 to February 1988

GT22CU in San Antonio de los Cobres, Argentina

The EMD GT22CU was first appeared in 1972. Designed mainly for the narrow gauge market, the GT22CU now carried a CU suffix which indicated that this model had six axles (C) and traction motors that could fit from one meter to 5 ft 6 in (1,676 mm) gauge tracks (U). Another new suffix introduced to this model was the T, which indicated the use of a turbocharger.

The GT22CU was purchased by the Ferrocarriles Argentinos from June 1972 to January 1980.

The EMD GT22CW-2 was first appeared in 1988 and now carried a CW suffix which indicated that this model had six axles (C) and traction motors that could fit from Standard Gauge rails to 5 ft 6 in (1,676 mm) gauge tracks (W). Another new suffix introduced to this model was the T, which indicated the use of a turbocharger. Finally, this model now carried the popular EMD Dash 2 electronics which improved its reliability.

The GT22CW-2 found most of its popularity in Argentina and even after the breakup of Ferrocarriles Argentinos, did the successors of that company continued to purchase more GT22CW-2s.

Production spanned from March 1988 to December 1997.

Hrvatske Željeznice ĐĐ GT22HW-2 #2044.001

The GT22HW-2 was a departure from the standard production of the GT22 Series as it was a custom model designed to meet the conditions of Yugoslavia. This multipurpose locomotive was introduced with a turbocharger (T), Head End Power (H) for passenger use and EMD Dash 2 Electronics (-2), with an A1A-A1A axle arrangement. Due to the locomotive's compact appearance, the length was shortened by 1.25 feet (381 mm) from a normal GT22CW-2. Thirty four of these locomotives were manufactured by Đuro Đaković between February 1981 and August 1984. Since Yugoslavia had various languages arising from the ethnicities in the country, the locomotives were given four different lettering variations:

First introduced in January 1982, the GT22CUM series were locomotives were a powerful single-engined locomotive with light weight per-axle. Designed exclusively for the RFFSA by Equipmentos Villares S.A., the GT22CUM now carried a CU suffix which indicated that this model had six axles (C) and traction motors that could fit from one meter to 5 ft 6 in (1,676 mm) gauge tracks (U). Two custom designations were introduced for this locomotive: M for meter gauge (1,000 mm / 3 ft 3 ³⁄₈ in) and -1/-2 to indicate a Type 1 or Type 2 model.

• The Type 1 Model is distinguished by not including an air reservoir on both sides of the carbody.
• The Type 2 Model is distinguished by an extended nose and an air reservoir on both sides of the carbody.

Production spanned from January 1982 to May 1986.

All subsidiaries of the RFFSA were consolidated in 1983 with the introduction of the SIGO System by the federal government.

When most second and third world railroads couldn't operate standard EMD GT22s due to their weight, EMD introduced the GT22LC; which is the same as a GT22C, but now incorporated with a much lighter (L) frame to handle harsher conditions than normal while still equipped with a turbocharger. Due to the lightweight frame, the U or W suffixes no longer applied as the locomotive was designed to handle any rail gauge the locomotive is applied to.

Production spanned from February 1985 to August 1986.

Loco D-305 (Typ GT22LC-2) at 23. August 2018 in station Caia (Mosambique)

Basically the same as the GT22LC, the GT22LC-2 now added EMD Dash 2 Electronics while still retaining a turbocharger. Due to the Lightweight frame, the U or W suffixes no longer applied.

Production spanned from November 1981 to November 1996.

• List of GM-EMD locomotives
• List of GMD Locomotives

• Electro-Motive Division Export GM Models
• Astilleros Argentinos Rio de la Plata S.A. GM Export Models
• Henschel und Sohn GmbH GM Export Models
• Đuro Đaković GM Export Models
• Equipamentos Villares S.A. GM Export Models
• General Motors Diesel Division Export Models
• GM GT22CU/GT22CW Data Sheet
• pt:EMD G22CU EMD G22CU Article in Portuguese.

Wikimedia Commons has media related to EMD GT22 locomotives.