Hadamard transform

The Hadamard transform H_m is a 2^m × 2^m matrix, the Hadamard matrix (scaled by a normalization factor), that transforms 2^m real numbers x_n into 2^m real numbers X_k. The Hadamard transform can be defined in two ways: recursively, or by using the binary (base-2) representation of the indices n and k.

Recursively, we define the 1 × 1 Hadamard transform H₀ by the identity H₀ = 1, and then define H_m for m > 0 by:

${\displaystyle H_{m}={\frac {1}{\sqrt {2}}}{\begin{pmatrix}H_{m-1}&H_{m-1}\\H_{m-1}&-H_{m-1}\end{pmatrix}}}$

where the 1/√2 is a normalization that is sometimes omitted.

For m > 1, we can also define H_m by:

${\displaystyle H_{m}=H_{1}\otimes H_{m-1}}$

where ${\displaystyle \otimes }$ represents the Kronecker product. Thus, other than this normalization factor, the Hadamard matrices are made up entirely of 1 and −1.

Equivalently, we can define the Hadamard matrix by its (k, n)-th entry by writing

${\displaystyle {\begin{aligned}k&=\sum _{i=0}^{m-1}{k_{i}2^{i}}=k_{m-1}2^{m-1}+k_{m-2}2^{m-2}+\cdots +k_{1}2+k_{0}\\n&=\sum _{i=0}^{m-1}{n_{i}2^{i}}=n_{m-1}2^{m-1}+n_{m-2}2^{m-2}+\cdots +n_{1}2+n_{0}\end{aligned}}}$

where the k_j and n_j are the binary digits (0 or 1) of k and n, respectively. Note that for the element in the top left corner, we define: ${\displaystyle k=n=0}$. In this case, we have:

${\displaystyle \left(H_{m}\right)_{k,n}={\frac {1}{2^{\frac {m}{2}}}}(-1)^{\sum _{j}k_{j}n_{j}}}$

This is exactly the multidimensional ${\displaystyle \scriptstyle 2\,\times \,2\,\times \,\cdots \,\times \,2\,\times \,2}$ DFT, normalized to be unitary, if the inputs and outputs are regarded as multidimensional arrays indexed by the n_j and k_j, respectively.

Some examples of the Hadamard matrices follow.

${\displaystyle {\begin{aligned}H_{0}=+&{\begin{pmatrix}{\begin{array}{r}1\end{array}}\end{pmatrix}}\\H_{1}={\frac {1}{\sqrt {2}}}&{\begin{pmatrix}{\begin{array}{rr}1&1\\1&-1\end{array}}\end{pmatrix}}\\H_{2}={\frac {1}{2}}&{\begin{pmatrix}{\begin{array}{rrrr}1&1&1&1\\1&-1&1&-1\\1&1&-1&-1\\1&-1&-1&1\end{array}}\end{pmatrix}}\\H_{3}={\frac {1}{2^{\frac {3}{2}}}}&{\begin{pmatrix}{\begin{array}{rrrrrrrr}1&1&1&1&1&1&1&1\\1&-1&1&-1&1&-1&1&-1\\1&1&-1&-1&1&1&-1&-1\\1&-1&-1&1&1&-1&-1&1\\1&1&1&1&-1&-1&-1&-1\\1&-1&1&-1&-1&1&-1&1\\1&1&-1&-1&-1&-1&1&1\\1&-1&-1&1&-1&1&1&-1\end{array}}\end{pmatrix}}\\\left(H_{n}\right)_{i,j}={\frac {1}{2^{\frac {n}{2}}}}&(-1)^{i\cdot j}\end{aligned}}}$

where ${\displaystyle i\cdot j}$ is the bitwise dot product of the binary representations of the numbers i and j. For example, if ${\displaystyle \scriptstyle n\;\geq \;2}$, then ${\displaystyle \scriptstyle \left(H_{n}\right)_{3,2}\;=\;(-1)^{3\cdot 2}\;=\;(-1)^{(1,1)\cdot (1,0)}\;=\;(-1)^{1+0}\;=\;(-1)^{1}\;=\;-1}$, agreeing with the above (ignoring the overall constant). Note that the first row, first column element of the matrix is denoted by ${\displaystyle \scriptstyle \left(H_{n}\right)_{0,0}}$.

H₁ is precisely the size-2 DFT. It can also be regarded as the Fourier transform on the two-element additive group of Z/(2).

The rows of the Hadamard matrices are the Walsh functions.

In the classical domain, the Hadamard transform can be computed in ${\displaystyle n\log n}$ operations (${\displaystyle n=2^{m}}$), using the fast Hadamard transform algorithm.

In the quantum domain, the Hadamard transform can be computed in ${\displaystyle O(1)}$ time, as it is a quantum logic gate that can be parallelized.

In quantum information processing the Hadamard transformation, more often called Hadamard gate in this context (cf. quantum gate), is a one-qubit rotation, mapping the qubit-basis states ${\displaystyle |0\rangle }$ and ${\displaystyle |1\rangle }$ to two superposition states with equal weight of the computational basis states ${\displaystyle |0\rangle }$ and ${\displaystyle |1\rangle }$. Usually the phases are chosen so that we have

${\displaystyle H={\frac {|0\rangle +|1\rangle }{\sqrt {2}}}\langle 0|+{\frac {|0\rangle -|1\rangle }{\sqrt {2}}}\langle 1|}$

in Dirac notation. This corresponds to the transformation matrix

${\displaystyle H_{1}={\frac {1}{\sqrt {2}}}{\begin{pmatrix}1&1\\1&-1\end{pmatrix}}}$

in the ${\displaystyle |0\rangle ,|1\rangle }$ basis, also known as the computational basis. The states ${\textstyle {\frac {\left|0\right\rangle +\left|1\right\rangle }{\sqrt {2}}}}$ and ${\textstyle {\frac {\left|0\right\rangle -\left|1\right\rangle }{\sqrt {2}}}}$ are known as ${\displaystyle \left|{\boldsymbol {+}}\right\rangle }$ and ${\displaystyle \left|{\boldsymbol {-}}\right\rangle }$ respectively, and together constitute the polar basis in quantum computing.

Many quantum algorithms use the Hadamard transform as an initial step, since it maps m qubits initialized with ${\displaystyle |0\rangle }$ to a superposition of all 2^m orthogonal states in the ${\displaystyle |0\rangle ,|1\rangle }$ basis with equal weight.

Notably, computing the quantum Hadamard transform is simply the application of a Hadamard gate to each qubit individually because of the tensor product structure of the Hadamard transform. This simple result means the quantum Hadamard transform requires log n operations, compared to the classical case of n log n operations.

The Hadamard transform can be used to estimate phylogenetic trees from molecular data.[3][4][5] Phylogenetics is the subfield of evolutionary biology focused on understanding the relationships among organisms. A Hadamard transform applied to a vector (or matrix) of site pattern frequencies obtained from a DNA multiple sequence alignment can be used to generate another vector that carries information about the tree topology. The invertible nature of the phylogenetic Hadamard transform also allows the calculation of site likelihoods from a tree topology vector, allowing one to use the Hadamard transform for maximum likelihood estimation of phylogenetic trees. However, the latter application is less useful than the transformation from the site pattern vector to the tree vector because there are other ways to calculate site likelihoods[6][7] that are much more efficient. However, the invertible nature of the phylogenetic Hadamard transform does provide an elegant tool for mathematic phylogenetics.[8][9]

The mechanics of the phylogenetic Hadamard transform involve the calculation of a vector ${\displaystyle \gamma (T)}$ that provides information about the topology and branch lengths for tree ${\displaystyle T}$ using the site pattern vector or matrix ${\displaystyle s(T)}$.

${\displaystyle \gamma (T)=H^{-1}(\ln(Hs(T)))}$

where ${\displaystyle H}$ is the Hadamard matrix of the appropriate size. This equation can be rewritten as a series of three equations to simplify its interpretation:

${\displaystyle r=Hs(T)}$

${\displaystyle \rho =\ln(r)}$

${\displaystyle \gamma (T)=H^{-1}\rho }$

The invertible nature of this equation allows one to calculate an expected site pattern vector (or matrix) as follows:

${\displaystyle s(T)=H^{-1}(\exp(H\gamma (T)))}$

We can use the Cavender-Farris-Neyman (CFN) two-state substitution model for DNA by encoding the nucleotides as binary characters (the purines A and G are encoded as R and the pyrimidines C and T are encoded as Y). This makes it possible to encode the multiple sequence alignment as the site pattern vector ${\displaystyle s(T)}$ that can be converted to a tree vector ${\displaystyle \gamma (T)}$, as shown in the following example:

Example showing the Hadamard transform for a specific tree (values for worked example adapted from Waddell et al. 1997[10])

Index	Binary pattern	Alignment patterns	${\displaystyle \gamma (T)}$	${\displaystyle \rho =H^{-1}\gamma (T)}$	${\displaystyle r=\exp(\rho )}$	${\displaystyle s(T)=H^{-1}\rho }$
0	0000	RRRR and YYYY	-0.475	0	1	0.6479
1	0001	RRRY and YYYR	0.2	-0.5	0.6065	0.1283
2	0010	RRYR and YYRY	0.025	-0.15	0.8607	0.02
3*	0011	RRYY and YYRR	0.025	-0.45	0.6376	0.0226
4	0100	RYRR and YRYY	0.2	-0.45	0.6376	0.1283
5*	0101	RYRY and YRYR	0	-0.85	0.4274	0.0258
6*	0110	RYYR and YRRY	0	-0.5	0.6065	0.0070
7	0111	RYYY and YRRR	0.025	-0.9	0.4066	0.02

The example shown in this table uses the simplified three equation scheme and it is for a four taxon tree that can be written as ((A,B),(C,D)); in newick format. The site patterns are written in the order ABCD. This particular tree has two long terminal branches (0.2 transversion substitutions per site), two short terminal branches (0.025 transversion substitutions per site), and a short internal branch (0.025 transversion substitutions per site); thus, it would be written as ((A:0.025,B:0.2):0.025,(C:0.025,D:0.2)); in newick format. This tree will exhibit long branch attraction if the data are analyzed using the maximum parsimony criterion (assuming the sequence analyzed is long enough for the observed site pattern frequencies to be close to the expected frequencies shown in the ${\displaystyle s(T)=H^{-1}\rho }$ column). The long branch attraction reflects the fact that the expected number of site patterns with index 6 -- which support the tree ((A,C),(B,D)); -- exceed the expected number of site patterns that support the true tree (index 4). Obviously, the invertible nature of the phylogenetic Hadamard transform means that the tree vector means that the tree vector ${\displaystyle \gamma (T)}$ corresponds to the correct tree. Parsimony analysis after the transformation is therefore statistically consistent,[11] as would be a standard maximum likelihood analysis using the correct model (in this case the CFN model).

Note that the site pattern with 0 corresponds to the sites that have not changed (after encoding the nucleotides as purines or pyrimidines). The indices with asterisks (3, 5, and 6) are "parsimony-informative", and. the remaining indices represent site patterns where a single taxon differs from the other three taxa (so they are the equivalent of terminal branch lengths in a standard maximum likelihood phylogenetic tree).

If one wishes to use nucleotide data without recoding as R and Y (and ultimately as 0 and 1) it is possible to encode the site patterns as a matrix. If we consider a four-taxon tree there are a total of 256 site patterns (four nucleotides to the 4^th power). However, symmetries of the Kimura three-parameter (or K81) model allow us to reduce the 256 possible site patterns for DNA to 64 patterns, making it possible to encode the nucleotide data for a four-taxon tree as an 8 x 8 matrix[12] in a manner similar to the vector of 8 elements used above for transversion (RY) site patterns. This is accomplished by recoding the data using the Klein four-group:

As with RY data, site patterns are indexed relative to the base in the arbitrarily chosen first taxon with the bases in the subsequent taxa encoded relative to that first base. Thus, the first taxon receives the bit pair (0,0). Using those bit pairs one can produce two vectors similar to the RY vectors and then populate the matrix using those vectors. This can be illustrated using the example from Hendy et al. (1994),[12] which is based on a multiple sequence alignment of four primate hemoglobin pseudogenes:

The much larger number of site patterns in column 0 reflects the fact that column 0 corresponds to transition differences, which accumulate more rapidly than transversion differences in virtually all comparisons of genomic regions (and definitely accumulate more rapidly in the hemoglobin pseudogenes used for this worked example[13]). If we consider the site pattern AAGG it would to binary pattern 0000 for the second element of the Klein group bit pair and 0011 for the first element. in this case binary pattern based on the first element first element corresponds to index 3 (so row 3 in column 0; indicated with a single asterisk in the table). The site patterns GGAA, CCTT, and TTCC would be encoded in the exact same way. The site pattern AACT would be encoded with binary pattern 0011 based on the second element and 0001 based on the first element; this yields index 1 for the first element and index 3 for the second. The index based on the second Klein group bit pair is multiplied by 8 to yield the column index (in this case it would be column 24) The cell that would include the count of AACT site patterns is indicated with two asterisks; however, the absence of a number in the example indicates that the sequence alignment include no AACT site patterns (likewise, CCAG, GGTC, and TTGA site patterns, which would be encoded in the same way, are absent).

The Hadamard transform is also used in data encryption, as well as many signal processing and data compression algorithms, such as JPEG XR and MPEG-4 AVC. In video compression applications, it is usually used in the form of the sum of absolute transformed differences. It is also a crucial part of Grover's algorithm and Shor's algorithm in quantum computing. The Hadamard transform is also applied in experimental techniques such as NMR, mass spectrometry and crystallography. It is additionally used in some versions of locality-sensitive hashing, to obtain pseudo-random matrix rotations.

• Fast Walsh–Hadamard transform
• Pseudo-Hadamard transform
• Haar transform
• Generalized distributive law

• Ritter, Terry (August 1996). "Walsh-Hadamard Transforms: A Literature Survey".
• Akansu, A.N.; Poluri, R. (July 2007). "Walsh-Like Nonlinear Phase Orthogonal Codes for Direct Sequence CDMA Communications" (PDF). IEEE Transactions on Signal Processing. 55 (7): 3800–6. doi:10.1109/TSP.2007.894229.
• Pan, Jeng-shyang Data Encryption Method Using Discrete Fractional Hadamard Transformation (May 28, 2009)
• Lachowicz, Dr. Pawel. Walsh–Hadamard Transform and Tests for Randomness of Financial Return-Series (April 7, 2015)
• Beddard, Godfrey; Yorke, Briony A. (January 2011). "Pump-probe Spectroscopy using Hadamard Transforms" (PDF).
• Yorke, Briony A.; Beddard, Godfrey; Owen, Robin L.; Pearson, Arwen R. (September 2014). "Time-resolved crystallography using the Hadamard transform". Nature Methods. 11 (11): 1131–1134. doi:10.1038/nmeth.3139. PMC 4216935. PMID 25282611.