Lamborghini V10
The Lamborghini V10 is a ninety degree (90°) V10 petrol engine which was developed for the Lamborghini Gallardo automobile, first sold in 2003.
Lamborghini V10 | |
---|---|
Lamborghini V10 engine in a Lamborghini Gallardo | |
Overview | |
Manufacturer | Audi & Automobili Lamborghini S.p.A. |
Production | 2003-present |
Layout | |
Configuration | 90° V10 petrol engine |
Displacement | 4,961 cc (302.7 cu in), 5,204 cc (317.6 cu in) |
Cylinder bore | 5.0 L: 82.5 mm (3.25 in), 5.2 L: 84.5 mm (3.33 in) |
Piston stroke | 92.8 mm (3.65 in) |
Block material | Cast aluminium alloy |
Head material | Cast aluminium alloy |
Valvetrain | 4-valves per cylinder, double overhead camshaft |
Compression ratio | 5.0 L: 11.5:1 5.2 L: 12.5:1 |
Combustion | |
Fuel system | 5.0 L: Electronic multi-point sequential fuel injection 5.2 L: Electronic multi-point Fuel Stratified Injection |
Fuel type | Petrol/Gasoline |
Oil system | Dry sump |
Cooling system | Water cooled |
Output | |
Power output | 5.0 L: 368–390 kW (500–530 PS; 493–523 bhp) 5.2 L: 412–471 kW (560–640 PS; 553–632 bhp) @ 8,250 rpm |
Specific power | 5.0 L: 78.6 kW (106.9 PS; 105.4 bhp) per litre 5.2 L: 86.3 kW (117.3 PS; 115.7 bhp) per litre |
Torque output | 5.0 L: 510 N⋅m (376 lbf⋅ft) 5.2 L: 560–601 N⋅m (413–443 lbf⋅ft) @ 6,500 rpm |
Chronology | |
Predecessor | Lamborghini V8 (indirect) |
Developed by Lamborghini, for use in the Gallardo, and the first engine developed for Automobili Lamborghini S.p.A. after they were acquired by AUDI AG – part of the Volkswagen Group.
This engine has its origins in two concept cars made by Lamborghini, the 1988 P140 and the 1995 Calà. Both were equipped with engines having a 3.9-litre displacement. In the early 2000s, Lamborghini resumed the project and the engine was redesigned by increasing its displacement.
The crankcase and cylinder block are built at the Audi Hungaria Zrt. factory in Győr, Hungary,[1] whilst final assembly is carried out at Sant'Agata Bolognese, Italy.[2] The engine has a 90° vee angle and, unusually for a production engine, a dry sump lubrication system is utilised to keep the center of gravity of the engine low.
There was also some speculation that the engine block of the original 5.0-litre Lamborghini V10 was closely based on the Audi 4.2 FSI V8, which Audi produces for its luxury cars. However, this was denied by Audi AG, in their official documentation for their 5.2 FSI V10 engine, as used in the Audi S6 and Audi S8 – the Lamborghini 5.0 V10 has a cylinder bore spacing of 88 millimetres (3.46 in) between centres, whereas the Audi 5.2 V10 cylinder bore spacing is 90 millimetres (3.54 in), the same as the Audi 4.2 FSI V8.[3] The cylinder heads use the four valves per cylinder layout favoured by the Italian firm, rather than the five valve per cylinder variation formerly favoured by the German members of Volkswagen Group – including Audi and Volkswagen Passenger Cars. It was later confirmed that the new 5.2-litre Lamborghini V10 is mechanically identical to the Audi 5.2 V10 engine,[4] as is evident by Lamborghini's usage of Audi's Fuel Stratified Injection, and 90 mm cylinder spacing.
Specifications
- engine configuration
- 90° V10 engine; dry sump lubrication system[5]
- engine displacement etc.
- 5.0 — 4,961 cubic centimetres (302.7 cu in); bore x stroke: 82.5 by 92.8 millimetres (3.25 in × 3.65 in). Rod length is 154mm. (Rod/stroke ratio:1.65), 496.1 cc per cylinder; compression ratio: 11.5:1[5]
- 5.2 — 5,204 cubic centimetres (317.6 cu in); bore x stroke: 84.5 by 92.8 millimetres (3.33 in × 3.65 in). Rod length is 154mm. (Rod/stroke ratio:1.65), 520.4 cc per cylinder; compression ratio: 12.5:1[5]
- cylinder block and crankcase
- 5.0 — cast aluminium alloy with integrated liners with eutectic alloy; 88 mm (3.46 in) cylinder bore spacing;[6] forged steel crankshaft with split crankpins (to create even 72 deg firing interval with the 90 deg vee-angle)[5]
- 5.2 — cast aluminium alloy; 90 mm cylinder bore spacing; forged steel crankshaft with shared crankpins (creating an uneven firing interval of either 54 deg or 90 deg separation)[5]
- cylinder heads and valvetrain
- cast aluminium alloy, four valves per cylinder, 40 valves total, low-friction roller cam followers with automatic hydraulic valve clearance compensation, chain driven double overhead camshafts, continuously variable valve timing system both for intake and exhaust
- aspiration
- two air filters, two hot-film air mass meters, two cast alloy throttle bodies each with electronically controlled throttle valves, cast magnesium alloy variable geometry and resonance intake manifold
- fuel system
- 5.0 — two linked common rail fuel distributor rails, electronic sequential multi-point indirect fuel injection with 10 intake manifold-sited fuel injectors
- 5.2 — fully demand-controlled and returnless; fuel tank mounted low pressure fuel pump, Fuel Stratified Injection (FSI):[6] two inlet camshaft double-cam driven single-piston high-pressure injection pumps maintaining pressure in the two stainless steel common rail fuel distributor rails, ten combustion chamber sited direct injection solenoid-controlled sequential fuel injectors[5]
- ignition system and engine management
- mapped direct ignition with centrally mounted spark plugs and ten individual direct-acting single spark coils; two Lamborghini LIE electronic engine control unit (ECUs) working on the 'master and slave' concept due to the high revving nature of the engine
- exhaust system
- 5.0 — five-into-one exhaust manifolds for each cylinder bank
- 5.2 — 2-1-2 branch exhaust manifold per cylinder bank[5] to minimise reverse pulsation of expelled exhaust gasses
- 5.0 power and torque outputs and applications
- 368 kilowatts (500 PS; 493 bhp) at 7,800 rpm; 510 newton metres (376 lbf⋅ft) at 4,500 rpm (80% available from 1,500 rpm) — Gallardo 2003-2005
- 382 kilowatts (519 PS; 512 bhp) at 8,000 rpm; 510 newton metres (376 lbf⋅ft) at 4,250 rpm — Gallardo SE, Spyder, and 2006-2008
- 390 kilowatts (530 PS; 523 bhp) at 8,000 rpm; 510 newton metres (376 lbf⋅ft) at 4,250 rpm — Gallardo Superleggera
- 5.2 power and torque outputs and applications[7]
- 224 kilowatts (305 PS; 300 bhp) at 7,000 rpm; 400 newton metres (295 lbf⋅ft) at 6,500 rpm — Gallardo Super GT - 2008-2009
- 404.5 kilowatts (550 PS; 542 bhp) at 8,000 rpm; 540 newton metres (398 lbf⋅ft) at 6,500 rpm — Gallardo LP550/2, Balboni, Spyder, Bicolore, AD Personam, Singapore Limited Edition, Super Trofeo, Tricolore, Hong Kong 20th Anniversary Edition, Malaysia Limited Edition, India Serie Speciale, Indonesia Limited Edition, Edizione Tecnica - 2010-2013
- 412 kilowatts (560 PS; 553 bhp) at 8,000 rpm; 540 newton metres (398 lbf⋅ft) at 6,500 rpm — Gallardo LP560/4, LP560/4 Spyder, Polizia, Gold Edition, Bicolore, LP560/4 Noctis, LP560/4 Bianco Rosso, Super Trofeo, LP560/4 GT, Reiter Extenso, Edizione Tecnica, LP560/2 50° Anniversario - 2008-2013
- 419 kilowatts (570 PS; 562 bhp) at 8,000 rpm; 540 newton metres (398 lbf⋅ft) at 6,500 rpm — Gallardo LP570/4 SuperLeggera, Spyder Performante, Edizione Tecnica, SuperLeggera Nero Nemesis, SuperLeggera Bianco Canopus, Super Trofeo Stradale, Squadra Corse, Macau GP Edition - 2010-2013
- 441 kilowatts (600 PS; 591 bhp) at 8,000 rpm; 540 newton metres (398 lbf⋅ft) at 6,500 rpm — Gallardo GT3
- 449 kilowatts (610 PS; 602 bhp) at 8,250 rpm; 560 newton metres (413 lbf⋅ft) at 6,500 rpm — Huracán LP610/4 coupé and spyder - 2014-2019
- 426.5 kilowatts (580 PS; 572 bhp) at 8,000 rpm; 540 newton metres (398 lbf⋅ft) at 6,500 rpm — Huracán LP580/2 coupé and spyder - 2016-present
- 456 kilowatts (620 PS; 612 bhp) at 8,250 rpm; 570 newton metres (420 lbf⋅ft) at 6,500 rpm — Huracán LP620/2 Super Trofeo, GT3, Super Trofeo Evo - 2014-present
- 471 kilowatts (640 PS; 632 bhp) at 8,000 rpm; 600 newton metres (443 lbf⋅ft) at 6,500 rpm — Huracán LP640/4 Performaté coupé and spyder - 2017-present
- 471 kilowatts (640 PS; 632 bhp) at 8,000 rpm; 600 newton metres (443 lbf⋅ft) at 6,500 rpm — Huracán LP640/4 Evo coupé and spyder - 2019-present
Vehicles
As of 2019, all V10s in the Lamborghini lineup after the first generation Gallardo use the 5.2-litre variant.[8] They are:
Lamborghini
- Gallardo LP 550-2
- Gallardo LP 550-2 Spyder
- Gallardo LP 560-4
- Gallardo LP 560-4 Spyder
- Gallardo LP 570-4 Superleggera Edizione Technica
- Gallardo LP 570-4 Spyder Performante Edizone Technica
- Gallardo LP 570-4 Squadra Corse
- Gallardo LP 550-2 Bicolore
- Gallardo LP 550-2 Tricolore
- Gallardo LP 570-4 Super Trofeo Stradale
- Gallardo GT3-R
- Gallardo LP 600 GT3
- Sesto Elemento
- Egoista
- Huracán LP 610-4 Avio
- Huracán LP 580-2
- Huracán LP 580-2 Spyder
- Huracán LP 610-4 Spyder
- Huracán LP 610-4
- Huracán LP 620-2 Super Trofeo
- Huracán GT3
- Huracán Super Trofeo Evo
- Huracán LP 640-4 Performante
- Huracán LP 640-4 Performante Spyder
- Huracán LP 640-4 Evo
- Huracán LP 610-2 Evo RWD
- Huracán GT3 Evo
- Asterion LPI 910-4
- Urus Concept
Audi
(The Lamborghini V10 has also had a placement in the Audi R8, RS6, S8 and S6. The 5.2 V10 used in the S6 and S8 is different in several important aspects, namely a less robust crankshaft with a split pin design, cast aluminum pistons, and a traditional wet-sump oiling system, as well as differences in the valvetrain - all of which, combined, result in the much higher RPM red line and specific power output of the Gallardo and R8)[9]
See also
- V12 – 6.2/6.5 V12 430-471kW sub-section of the above article
- V10 – 5.2 FSI V10 412kW sub-section of the above article
- V10 – 5.0 V10 368kW sub-section of the above article
References
- "Lamborghini Cars full specifications - First spyshots of the Lamborghini L140 model". LamboCars.com. Retrieved 30 August 2009.
- "Conversation: Lamborghini CEO Stephan Winkelmann - Italian style, German quality". edmunds - Inside Line. Edmunds.com. 27 February 2007. Retrieved 30 August 2009.
- Audi 5.2 litre V10 FSI engine. Service Training - Self-Study Programme (SSP 376 ed.). D-74172 Neckarsulm, Germany: AUDI AG. June 2006.
The (Audi) V10 belongs to the next generation of Audi V-engines, all of which have a 90-degree included angle and a spacing of 90 millimetres between cylinder centres. Compared to the engine in the Lamborghini Gallardo, which has a spacing of 88 millimetres between cylinder centres, the Audi engine has several new features in key areas.
CS1 maint: location (link) - https://www.evo.co.uk/audi/r8/14165/audi-r8-v-lamborghini-gallardo-lp560-4
- "Lamborghini Gallardo LP560-4 - New Gallardo V10 bends design rules - Secrets behind Lamborghini's latest projectile, the LP560-4". evo News. evo.co.uk. 7 March 2008. Retrieved 30 August 2009.
- "Lamborghini gives Gallardo bigger engine, new name". AutoWeek Magazine. AutoWeek.com. 26 February 2008. Retrieved 9 January 2010.
- "Automobil Revue": catalogue edition 2008, p.316 and 2006, p.285. Cite journal requires
|journal=
(help) - http://www.lamborghini.com/en/models/
- "Archived copy" (PDF). Archived from the original (PDF) on 2014-07-05. Retrieved 2015-04-26.CS1 maint: archived copy as title (link)