List of home computers

Attributes are as typically advertised by the original manufacturer. Popular machines inspired third-party sources for adapters, add-on processors, mass storage, and other peripherals.

"Processor" indicates the microprocessor chip that ran the system. A few home computers had multiple processors, generally used for input/output devices. Processor speeds were not a competitive point among home computer manufacturers, and typically the processor ran either at its maximum rated speed ( between 1 and 4 MHz for most processor types here), or at some fraction of the television color subcarrier signal, for economy of design. Since a crystal oscillator was necessary for stable color, it was often also used as the microprocessor clock source. Many processors were second-sourced, with different manufacturers making the same device under different part numbers. Variations of a basic part number might have been used to indicate minor variations in speed or transistor type, or might indicate fairly significant alterations to the prototype's capabilities. In the Soviet Bloc countries, manufacturers made functional duplicates of Western microprocessors under different part number series.

TV indicates the factory configuration produces composite video compatible with a home TV receiver. Some computers came with a built-in RF modulator to allow connection to the TV receiver antenna terminals; others output composite video for use with a free-standing monitor or external RF modulator. Still others had built-in or proprietary monitors. Often a composite video monitor (monochrome or color) would be substituted for the family TV. Some standard types of video controller ICs were popular, but see the very detailed List of home computers by video hardware for a discussion of video capabilities of different models. Memory and TV bandwidth restrictions meant that typical home computers had only a few color choices and perhaps 20 lines of 40 characters of text as an upper limit to their video capabilities. Where the same model was sold in countries using PAL or NTSC television standards, sometimes there would be minor variations in the speed of the processor, because NTSC and PAL use different frequencies for the color information and the crystal for the video system was often also used for the processor clock.

Base mass storage was whatever came in the basic configuration. Some machines had built-in cassette drives or optional external drives, others relied on the consumer to provide a cassette recorder. Cassette recorders had the primary virtue of being widely available as a consumer product at the time. Typically a home computer would generate audio tones to encode data, that could be stored on audio tape through a direct connection to the recorder. Re-loading the data required re-winding the tape. The home computer would contain some circuit such as a phase-locked loop to convert audio tones back into digital data. Since consumer cassette recorders were not made for remote control, the user would have to manually operate the recorder in response to prompts from the computer. Random access to data on a cassette was impossible, since the entire tape would have to be searched to retrieve any particular item. A few manufacturers integrated a cassette tape drive or cassette-like tape mechanism into the console, but these variants were made obsolete by the reduction in cost of floppy diskette drives.

Floppy disk drives were initially very costly compared to the system purchase price. Plug-in ROM cartridges containing game or application software were popular in earlier home computers since they were easier to use, faster, and more reliable than cassette tapes. Once diskette drives became available at low cost, cartridges declined in popularity since they were more expensive to manufacture than reproducing a diskette, and had comparatively small capacity compared to diskettes. A few cartridges contained battery-backed memory that allowed users to save data (for example, game high scores) between uses of the cartridge.

Typically there were several models or variants within a product line, especially to account for different international video standards and power supplies; see the linked articles for variants and consequences of variations. "Compatibility" indicates some measure of compatibility with a parent type, however, sometimes incompatibility existed even within a product family. A "clone" system has identical hardware and is functionally interchangeable with its prototype; a few clone systems relied on illicit copies of system ROMs to make them functional.

This type of microcomputer required significant electronics skills to assemble or operate. They were sometimes sold in kit form that required the user to insert and solder components in a printed circuit board. They may have had just blinking lights and toggle switches, or a hexadecimal display and a numeric keypad. While some units were possibly expandable to the "checkbook balancing/homework typing" stage, most were intended more for education on the use and application of microprocessors. See also Microprocessor development board, Single-board computer.

• Altair 8800
• Apple I and also Replica 1
• Applix 1616
• Compukit UK101
• Dick Smith Super-80 Computer
• Educ-8 non-microprocessor kit computer
• Elektor Junior Computer
• Elektor TV Games Computer
• Ferguson Big Board
• Galaksija, a build-it-yourself home computer that created a wave of enthusiasts
• Heathkit H8 and relations
• Heathkit H11
• Heath ET-100 8088 trainer
• Kenbak-1
• KIM-1
• LNW-80
• MK14
• Mark-8
• Micro-Professor MPF-I
• Nascom 1 and Nascom 2
• Newbear 77-68
• Processor Technology SOL 20
• PSI Comp 80 (computer)
• SCELBI
• Sinclair ZX80 kit
• Tangerine MICROTAN 65
• TEC-1
• Wave Mate Bullet

These were aimed at the class room, not the living room. Some types were popular in the centrally planned economies of eastern Europe where Western computers were scarce, or in the early days of computer education in Western schools. Popular home computers of the period were fitted with various types of network interfaces to allow sharing of files, large disk drives, and printers, and often allowed a teacher to interact with a student, supervise the system usage, and carry out administrative tasks from a host computer.

• Acorn Archimedes (and derivatives)
• Aster CT-80
• BBC Micro
• Commodore SuperPET/SP9000
• IQ 151
• LINK 480Z
• Regency Systems R2C
• Research Machines 380Z Industrial and school systems
• Tiki 100
• TIM-011
• Unisys ICON

Logic demonstrators illustrated some of the logical principles of computer circuits, but were incapable of automatic operation or non-trivial calculations. Some were literally cardboard, others used combinations of switches and lamps to show how logical operations worked. Some products demonstrated logical operations purely mechanically.

• CARDboard Illustrative Aid to Computation cardboard computer logic demonstrator
• Digi-Comp I, mechanical logic demonstrator
• Digi-Comp II, mechanical logic using marbles
• Geniac, non-electronic logic demonstrator
• Minivac 601, logic trainer that demonstrated computer circuits

• History of computer hardware in Soviet Bloc countries
• Homebrew Computer Club
• Homebuilt computer
• List of home computers by video hardware classified by video interface
• List of computers running CP/M contains a list of personal computers running CP/M. These were usually intended for small office use.
• List of Soviet computer systems includes many "home" systems as well as office and "big iron" systems.
• Popular Electronics
• Simon (computer), a relay computer (demonstrator) from 1950
• SWTPC
• TV Typewriter

Media related to Home computers at Wikimedia Commons

• Obsolete technology website — Information about many old computers.
• old-computers.com — Web Site dedicated to old computers.
• oldcomputer.info — Web site with information about many old computers.
• History of Computers — online magazine featuring pictures and information about many computers made between the 1970s and the early 1990s
• epocalc The complete inventory of microcomputer manufacturers