MAN SG 220

The MAN SG 220 was a VöV-Standard articulated bus designed and manufactured by Maschinenfabrik Augsburg-Nürnberg (M.A.N.) in Germany between 1978 and 1983, available with two, three, or four doors in two different lengths. The bus was also exported to different countries, built locally in France, Slovenia, Turkey, and the United States.

M.A.N. SG 220
1979 MAN SG 220-18-2 for Seattle Metro (photographed in 1994)
Overview
ManufacturerMAN SE
Body and chassis
ClassTransit bus
RelatedMAN SG 310
Powertrain
EngineM.A.N. D2566 MLUM/US, 696 cu in (11.4 L) I-6, 305 hp (227 kW) @ 2000 rpm[1][2]
Transmission4-speed automatic Renk Doromat 874A (SG 220)[1] or 874B (SG 310)[2]
Dimensions
Wheelbase222.4 in (5.65 m) (F, SG 220)
225.5 in (5.73 m) (R, SG 220-16.5)[1]
18 ft 6 in (5.64 m) (F, SG 310)
18 ft 8 in (5.69 m) (55' R, SG 310)
23 ft 9 in (7.24 m) (60' R, SG 310)[2]
Length54.1 or 59.1 ft (16.5 or 18 m)[2]
Width102 in (2.59 m)[2]
Height125 in (3.18 m)[2]
Curb weight37,800 lb (17,100 kg) SG 220[1]
52,650 lb (23,880 kg) GVWR, SG 220[1]
59,525 lb (27,000 kg) GAWR, SG 310[2]
Chronology
PredecessorMAN SG 192
SuccessorMAN SG 240 H

In the American market, in order to meet Urban Mass Transportation Administration "Buy America" requirements for federally-subsidized vehicles, the initial set of vehicles were shipped as driveable shells and finished in the United States by AM General in Texas until 1979. After the joint venture with AM General ended, M.A.N. opened its own assembly plant in Cleveland, North Carolina to produce the SG 220 and its closely related derivative SG 310 (starting in 1981) until it abruptly withdrew from the United States transit bus market in 1988.

Design

The full model number describes the type, generation, length, and number of doors:

TypeGenerationLengthDoors
SG = Stadt Gelenke
("City Joints", articulated bus)
220
310
16.5 = 16.5 m (54 ft) long
18 = 18 m (59 ft) long
2 = 2 doors
3 = 3 doors
4 = 4 doors

Hence a SG 220-18-3 is an articulated bus 18 m (59 ft) long with three doors. Potential door locations are (from the front proceeding to the back):

  1. Ahead of the front axle, behind the windshield
  2. Ahead of the middle axle
  3. Behind the articulation, ahead of the rear axle
  4. Behind the rear axle

In the United States, the number of doors was limited to two or three, corresponding to locations 1-x-3-x or 1-2-3-x. The SG 310 was offered with two doors, in locations 1-x-3-x.

Both the SG 220 and 310 were high-floor "puller" type articulated buses, with the middle axle driven. The SG 220 and 310 were equipped with a M.A.N. D2566 MLUM/US inline-6 turbodiesel engine, rated at 305 hp (227 kW).[1][2]

History

United States

The AC Transit District serving Alameda and Contra Costa counties in the San Francisco Bay Area began using an over-the-road articulated coach in Transbay service in 1966;[3] subsequently, AC Transit was one of six transit districts to develop a "super bus" specification in the early 1970s for a higher-capacity bus. A pooled purchase was intended to reduce per-unit development costs.[4] Two European-built articulated buses were tested by AC Transit and Seattle Metro in the summer of 1974: one based on the Volvo B58 chassis, and the MAN SG 192.[1]:Table 1[5] Riders received the M.A.N. bus favorably, and the specification was released for bid in 1975;[6] the pooled purchase consortium, which by then had grown to encompass ten transit districts, awarded the order to AM General in August 1976.[7] Deliveries of the AM General/M.A.N. joint venture SG 220 articulated buses began in 1978.[8][9][10]

Buses were shipped from Germany as "driveable shells" and finished by AM General according to customer specifications. AM General terminated the joint venture agreement, taking effect after the delivery of the Seattle Metro buses, and MAN opened a manufacturing plant in Cleveland, North Carolina in October 1981, with an anticipated capacity of 400 buses per year.[1]:9,22 MAN withdrew from the US transit bus market in 1988 after an order of 40-ft buses for Chicago was blocked by an injunction.[11] The Cleveland plant was sold in 1989 to Daimler subsidiary Freightliner Trucks.

Operators

United States

Several operators in the United States formed a pooled purchase consortium and awarded the bid to the AM General/M.A.N. joint venture (the sole bidder)[12]:39 for over two hundred buses.[13] By March 15, 1982, 511 articulated buses from all manufacturers had been delivered in the United States; of these buses delivered, 399 were MAN/AM General buses. Orders had been placed for an additional 692 articulated buses; of those pending orders, 557 were MAN buses.[1]:Table 2

Although operating experience with the eleven initial operators showed the per-passenger labor costs of driving the articulated bus were reduced compared with conventional buses, the articulated bus cost was almost double that of a conventional bus, required maintenance was more frequent and more costly, and dwell times were increased.[14]

United States MAN operators[1]:Table 2 [11]
CitySystemAward date[lower-alpha 1]Fleet NosQtyModelPPC[13]
Atlanta, GAMARTA September 24, 1976 1601-161010[lower-alpha 2]55'
(SG 220-16.5-2A)
Yes
Chicago, ILCTA February 14, 1977 7000-70192055'
(SG 220-16.5-2A)
Yes
October 1980 7100-712412555'
(SG 310-16.5-2L)
No
Denver, CORTD July 1981 9001-90898960'
(SG 310-18)
No
Indianapolis, INIPTC July 1981 8401-843030[lower-alpha 3]60'
(SG 310-18)
No
Los Angeles, CASCRTD August 27, 1976 9200-92293060'
(SG 220-18-3A)
Yes
Memphis, TNMATA July 1981 500-5192060'
(SG 310-18)
No
Minneapolis, MNMTC August 30, 1976 1001-10202060'
(SG 220-18-2A)
Yes
August 1981 1021-10826260'
(SG 310-18-2L)
No
Nashville, TNKTRANS July 1981 101-1151555'
(SG 310-16.5-2A)
No
Oakland, CAAC Transit September 7, 1976 1600-16293060'
(SG 220-18-2A)
Yes
Phoenix, AZPTS October 12, 1976 7001-70202060'
(SG 220-18-2A)
Yes
1983 7021-70563655'
(SG 310-16.5-2A)
No
Pittsburgh, PAPA Transit February 28, 1977 3000-30193055'
(SG 220-16.5-2A)
Yes
July 1981 3050-30793055'
(SG 310-16.5-2L)
No
Rochester, NYRGRTA 1984 301-3171760'
(SG 310-18-2A)
No
San Diego, CASDTC August 30, 1976 1001-10454560'
(SG 220-18-2A)
Yes
San Francisco, CAMuni 1983 6000-609910060'
(SG 310-18)
No
San Jose, CASCCTD July 1981 2401-241515[lower-alpha 4]60'
(SG 310-18)
No
San Juan, PRAMA 1984 84801-848121260'
(SG 310-18-?)
No
San Rafael, CAGGBHTD September 8, 1976 451-46010[lower-alpha 5]60'
(SG 220-18-2A)
Yes
Seattle, WAMETRO August 30, 1976 1400-155015160'
(SG 220-18-2A)
Yes
May 1980 2000-2201202[lower-alpha 6][lower-alpha 7]60'
(SG 310-18-2L)
No
1983 4000-404546[lower-alpha 8]60'
(SG T310-18)
No
Spokane, WASTA 1986 210-2191060'
(SG 310-18-?)
No
Washington, DCWMATA August 30, 1976 5001-50434355'
(SG 220-16.5-2A)
Yes
July 1981 5101-51333260'
(SG 310-18)
No
Westchester County, NYRTD August 1981 600-6616260'
(SG 310-18)
No
Notes
  1. Ten members of the Pooled Purchase Consortium placed orders with AM General for 234 buses in 1976.[15] This excludes the 151 buses ordered by Seattle Metro.
  2. Sold to CATS in 1990.
  3. 8 sold to Des Moines Area Regional Transit in 1994.
  4. Sold to AC Transit in 1988.
  5. Sold to SCRTD in 1984.
  6. 114 sold to CTA in 2000.
  7. 14 sold to Rutgers University in 2001.
  8. Seattle Metro was the only operator of MAN trolleybuses in the US.

Competition

  • Crown-Ikarus 286 — In 1982, the only other manufacturer that had delivered an articulated transit bus to a United States transit district was Crown-Ikarus.

References

  1. Gundersen, Richard G.; Hawkes, Ted (October 1982). Technology of Articulated Transit Buses (Report). Urban Mass Transportation Administration. Retrieved January 17, 2019.
  2. "SG-310 Articulated Bus". M.A.N. Truck & Bus Corporation. 1983. Retrieved January 14, 2019.
  3. "A New concept in Public Transit" (PDF). Transit-Times. Vol. 8 no. 11. AC Transit. March 1966.
  4. "Super bus project: Design sought for future coach" (PDF). Transit-Times. Vol. 13 no. 1. AC Transit. July 1970. Retrieved January 8, 2019.
  5. "Riders may have chance To test two new articulated buses" (PDF). Transit-Times. Vol. 17 no. 1. AC Transit. July 1974. Retrieved January 8, 2019.
  6. "'Superbus' preliminary specifications Out to manufacturers for review" (PDF). Transit-Times. Vol. 17 no. 8. AC Transit. February 1975. Retrieved January 8, 2019.
  7. "Bending for Seattle". San Bernardino Sun. August 5, 1976. Retrieved January 11, 2019.
  8. "Articulated coaches will ease Space crunch on heavily-used lines" (PDF). Transit-Times. Vol. 20 no. 12. AC Transit. June 1978. Retrieved January 8, 2019.
  9. "Bendable buses due tomorrow". Coronado Eagle and Journal. September 21, 1978. Retrieved January 11, 2019.
  10. Tagliabue, John (December 27, 1980). "M.A.N.'s Bendable, Flexible Bus; U.S. Cities Climbing Aboard M.A.N.'s Bendable Bus U.S. Orders for 200 Buses 'Impressive Experience' Adaptable to New York?". New York Times. Retrieved January 11, 2019.
  11. Kristopans, Andre (October 3, 2014). "M.A.N. USA". Utah Rails. Retrieved January 18, 2019.
  12. Weiers, B.; Rossetti, M. (March 1982). Transit Bus Manufacturer Profiles (Report). U.S. Department of Transportation, Urban Mass Transportation Administration. Retrieved October 5, 2020.
  13. "Bendable bus — latest thing?". San Bernardino Sun. New York Times News Service. May 29, 1978. Retrieved January 11, 2019.
  14. Albright, Richard; Cummings, Stephen; Jessiman, William; Slavin, Howard; Waksman, Robert (July 1982). Articulated Bus Report (Report). Urban Mass Transportation Administration. Retrieved January 18, 2019.
  15. "Momentum for new bus fleet speeds up" (PDF). Transit-Times. Vol. 19 no. 3. AC Transit. September 1976. Retrieved January 17, 2019.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.