Megathrust earthquake

Megathrust earthquakes occur at subduction zones at destructive convergent plate boundaries, where one tectonic plate is forced underneath another, caused by slip along the thrust fault that forms the contact between them. These interplate earthquakes are the planet's most powerful, with moment magnitudes (Mw) that can exceed 9.0.[1][2] Since 1900, all earthquakes of magnitude 9.0 or greater have been megathrust earthquakes.[3]

Part of a series on
Earthquakes
Types
Causes
Characteristics
Measurement
Prediction
Other topics
  • Earth Sciences Portal

Terminology

During the rupture, one side of the fault is pushed upwards relative to the other, and it is this type of movement that is known as thrust.[4] They are a type of dip-slip fault. A thrust fault is a reverse fault with a dip of 45° or less.[5] Oblique-slip faults have significant components of different slip styles. The term megathrust does not have a widely accepted rigorous definition, but is used to refer to an extremely large thrust fault, typically formed at the plate interface along a subduction zone such as the Sunda megathrust.[6]

Areas

Megathrust earthquakes are almost exclusive to tectonic subduction zones and are often associated with the Pacific and Indian Oceans. These subduction zones are not only responsible for megathrust earthquakes but are also largely responsible for the volcanic activity associated with the Pacific Ring of Fire.

Since the earthquakes associated with these subduction zones deform the ocean floor, they often generate a significant series of tsunami waves. Subduction zone earthquakes are also known to produce intense shaking and ground movements for significant periods of time that can last for up to 5-6 minutes.

In the Indian Ocean region, the Sunda megathrust is located where the Indo-Australian Plate is subducting under the Eurasian Plate and extends 5,500 kilometres (3,400 mi) off the coasts of Myanmar, Sumatra, Java and Bali before terminating off the northwestern coast of Australia. This subduction zone was responsible for the 2004 Indian Ocean earthquake and tsunami.

In Japan, the Nankai megathrust under the Nankai Trough is responsible for Nankai megathrust earthquakes and associated tsunamis.

In North America, the Juan de Fuca Plate is subducting under the North American Plate creating the Cascadia subduction zone which stretches from Middle Vancouver, British Columbia to Northern California. This subduction zone was responsible for the 1700 Cascadia earthquake.[7] The Aleutian Trench, of the southern coast of Alaska, and the Aleutian Islands, where the North American Plate overrides the Pacific Plate, has generated many major earthquakes throughout history, several of which generated Pacific-wide tsunamis, including the 1964 Alaska earthquake; at magnitude 9.2, it remains the largest recorded earthquake in North America, and the second-largest earthquake instrumentally recorded in the world.

The largest recorded megathrust earthquake was the 1960 Valdivia earthquake, estimated magnitude 9.4-9.6, centered off the coast of Chile along the Peru-Chile trench, where the Nazca Plate is subducting under the South American Plate. This megathrust region has regularly generated extremely large earthquakes historically, the largest megathrust event within the last 20 years being the magnitude 8.8 2010 Chile earthquake.

A study reported in 2016 found that the largest megathrust quakes are associated with downgoing slabs with the shallowest dip, so-called flat slab subduction.[8]

Examples

Examples of megathrust earthquakes are listed in the following table.

Event Estimated Magnitude
(Mw)		 Tectonic Plates Involved Other Details/Notes
0365 Crete earthquake 8.0+ African Plate subducting beneath the Aegean Sea Plate
  • The quake generated a large tsunami in the eastern Mediterranean Sea and caused significant vertical displacement in the island of Crete.
  • Death toll in the "many thousands" according to Roman historian Ammianus Marcellinus.
869 Sanriku earthquake 8.6–9.0 Pacific Plate subducting beneath the Okhotsk Plate
  • Slip length: 200 km over (125 mi over)
  • Slip width: 85 km over (53 mi over)
  • Led to a death toll of around 1000 people and completely destroyed the town of Tagajō.
1575 Valdivia earthquake 8.5 Nazca Plate subducting beneath the South American Plate
1700 Cascadia earthquake 8.7–9.2 Juan de Fuca Plate subducting beneath the North American Plate
  • Slip length: 1000 km (625 mi)
  • Slip motion: 20 m (60 ft)
  • According to Native American oral traditions from the affected area, the quake and tsunami struck during a "winter evening" after many had gone to bed, wiping out several villages around Pachina Bay. A woman named Anacla Aq Sop was said to have been the only survivor of her entire tribe.
  • The generated tsunami-affected Japan; since it was not associated with a local earthquake, Japanese records called it an “orphan” tsunami.
1707 Hōei earthquake 8.6–9.3[9] Philippine Sea Plate subducting beneath the Eurasian Plate
  • Duration: approximately 10 minutes
  • Slip length: maybe 600 and 700 km (370 and 435 mi)
  • Around 29,000 houses were destroyed, over 5,000 people died and it was the most powerful earthquake in Japanese history until 2011.
  • The quake also triggered one of the three largest landslides ever seen in Japan.
  • It might also have changed the pressure levels inside the Mount Fuji magma chamber as the volcano erupted merely 49 days later on 16 December 1707.
1730 Valparaíso earthquake 9.1–9.3 Nazca Plate subducting beneath the South American Plate
  • Slip length: 600 and 800 km (370 and 500 mi)
  • Slip motion: 10 and 14 m (33 and 45 ft)
  • Caused destruction over a large area, though very few deaths were reported as a result of the earthquake and following tsunami. This was due to both a strong foreshock which made people leave their homes before the quake, as well as the inhabitants running to higher ground after seeing the water recede.
1737 Kamchatka earthquake 8.3–9.0 Pacific Plate subducting beneath the Okhotsk Plate
  • Duration: 15 minutes
  • Depth: 40 km
  • Slip length: maybe 700 km over (435 mi over)
  • No reported deaths or damage.
1746 Lima-Callao earthquake 8.6–8.8 Pacific Plate subducting beneath the Nazca Plate
  • Caused severe damage to all Peruvian ports and cities around the central Peruvian coastline.
  • Earthquake destroyed the city of Lima. A mere 25 out of 3,000 buildings were left standing but miraculously only 1,141 of its ~60,000 citizens lost their lives.
  • The tsunami which followed 30 minutes later obliterated the city of Callao, less than 200 of its ~5,000 citizens survived the event.
  • The port town of Pisco was also destroyed after having been rebuilt further inland after a previous tsunami in 1687.
1755 Lisbon earthquake 8.5–9.0 [10] Hypothesized to be part of a young subduction zone but origin still debated; related to the Azores–Gibraltar Transform Fault
  • Produced tsunami waves around 20 meters (66  ft) high.
  • Tsunami and firestorm (caused by candles lit for All Saints' Day) destroyed much of Lisbon.
  • Destruction rampant in the Algarve severely damaging villages, towns, and several coastal forts.
  • Between 40,000 and 50,000 people lost their lives in Portugal, Spain, and Morocco (according to economic historian Álvaro Pereira's estimates).
  • Grave of Nuno Álvares Pereira was destroyed.
  • The royal archives disappeared together with detailed records of the voyages of Vasco da Gama.
  • Ópera do Tejo burned to the ground and the Royal Ribeira Palace was destroyed.
  • Only recorded megathrust earthquake in the Atlantic Ocean.
1761 Lisbon earthquake ~8.5 Probably related to the earthquake of 1755.
1868 Arica earthquake 8.5–9.0 Nazca Plate subducting beneath the South American Plate
  • Slip length: 600 km (370 mi)
  • Resulted in the near-complete destruction of many cities and towns in the southern parts of Peru.
  • The port city of Pisco was razed.
  • The tsunami that followed caused severe damage not only in Peru but also in Hawaii and caused the only recorded deaths by a tsunami in New Zealand.
  • Led to the deaths of over 25,000 people.
1877 Iquique earthquake 8.5–9.0?
  • Slip length: 420 and 450 km (230 and 245 mi)
  • Caused much damage in the Chilean regions of Tarapacá and Antofagasta.
  • A 10 m (33 ft) tsunami washed up along 500 km (310 mi) of Chilean and Peruvian coastline.
  • Biggest loss of life contributed to the event was in Fiji where ~2,000 people died in the tsunami.
1906 Ecuador–Colombia earthquake 8.8
  • Slip length: 500 and 600 km (310 and 370 mi)
  • The greatest damage from the tsunami occurred on the coast between Río Verde, Ecuador, and Tumaco, Colombia.
  • Estimates of the number of deaths caused by the tsunami vary between 500 and 1,500.
1923 Great Kantō earthquake 8.2 Philippine Sea Plate subducting beneath the Okhotsk Plate
  • Earthquake struck at lunchtime when people were preparing food over open fires, because of this many large blazes broke out, some of which turned into raging firestorms.
  • Around 38,000 people were all burned alive at once when a fire tornado struck an old Clothing Depot in downtown Tokyo where they had taken shelter following the quake.
  • The extreme fires were caused by a strong typhoon bringing violent winds into Tokyo Bay around the same time of the earthquake.
  • Landslides were triggered, one of which pushed the entire village of Nebukawa and a stationary train with ~100 passengers into the sea.
  • Over 570,000 homes were destroyed, leaving an estimated 1.9 million homeless.
  • The total number of people who perished in the catastrophe was between 105,385 and 142,800.
1932 Jalisco earthquakes 8.2 Rivera Plate and Cocos Plate subducting beneath the North American Plate
  • Duration: 95 seconds
  • Depth: 60 km
1940 Lima earthquake 8.2 Nazca Plate subducting beneath the South American Plate along the Peru-Chile trench.
1942 Peru earthquake 8.2 Nazca Plate subducting beneath the South American Plate
1946 Nankaidō earthquake 8.1 Philippine Sea Plate subducting beneath the Eurasian Plate
  • Slip length: maybe 300 km (190 mi)
1952 Kamchatka earthquake 9.0 Pacific Plate subducting beneath the Okhotsk Plate
  • Depth: 30 km
  • Slip length: maybe 600 km over (370 mi over)
1960 Great Chilean earthquake 9.5 Nazca Plate subducting beneath the South American Plate
  • Duration: 5–6 minutes
  • Depth: 33 km
  • Slip length: 850 and 1000 km (530 and 625 mi)
  • Slip width: 200 km (125 mi)
  • Slip motion: 20 m (60 ft)
1963 Kuril Islands earthquake 8.5 Pacific Plate subducting beneath the Eurasian Plate
1964 Alaska earthquake ("Good Friday" earthquake) 9.2 Pacific Plate subducting beneath the North American Plate
  • Duration: 4–5 minutes
  • Depth: 25 km
  • Slip length: 800 and 850 km (500 and 530 mi)
  • Slip width: 250 km (155 mi)
  • Slip motion: 23 m (70 ft)
1965 Rat Islands earthquake 8.7 Pacific Plate subducting beneath the North American Plate
1985 Mexico City earthquake 8.0 Cocos Plate subducting beneath the North American Plate
2001 southern Peru earthquake 8.4 Nazca Plate subducting beneath the South American Plate
  • Depth: 33 km
  • Slip length: 300 km (190 mi)
  • Slip width: 120 km (75 mi)
2003 Hokkaido earthquake 8.3 Pacific Plate subducting beneath the Okhotsk Plate
2004 Sumatra-Andaman earthquake ("Indian Ocean earthquake") 9.1–9.3 India Plate subducting beneath the Burma Plate
  • The total vertical displacement measured by sonar survey is about 40 m in the vicinity of the epicenter and occurred as two separate movements which created two large, steep, almost vertical cliffs, one above the other.
  • Duration: 8–10 minutes
  • Depth: 30 km
  • Slip length: 1000 and 1300 km (625 and 810 mi)
  • Slip width: 180 km (110 mi)
  • Slip motion: 33 m (110 ft)
2005 Nias–Simeulue earthquake 8.6 Indo-Australian Plate subducting beneath the Eurasian Plate
2006 Kuril Islands earthquake 8.3 Pacific Plate subducting beneath the Okhotsk Plate
2010 Chile earthquake 8.8 Nazca Plate subducting beneath the South American Plate
  • Depth: 35 km
  • Slip length: 500 km (310 mi)
  • Slip width: 200 km (125 mi)
2011 Tōhoku earthquake and tsunami 9.1[11] Pacific Plate subducting beneath the Okhotsk Plate[12][13]
  • Duration: 6 minutes
  • Depth: 29 km
  • Slip length: 500 km (310 mi)
  • Slip width: 200 km (125 mi)
  • Slip motion: 20 m (60 ft)
2013 Okhotsk Sea earthquake 8.3 Pacific Plate subducting beneath the Okhotsk Plate
2014 Iquique earthquake 8.2 Nazca Plate subducting beneath the South American Plate
  • Depth: 20.1 km
  • Slip length: 170 km (105 mi)
  • Slip width: 70 km (45 mi)
2015 Illapel earthquake 8.3
  • Depth: 25 km
  • Slip length: 260 km (160 mi)
  • Slip width: 80 km (50 mi)

See also

References
  1. Meier, M.-A.; Ampuero, J. P.; Heaton, T. H. (22 September 2017). "The hidden simplicity of subduction megathrust earthquakes". Science. 357 (6357): 1277–1281. doi:10.1126/science.aan5643. PMID 28935803. S2CID 206660652.
  2. "Questions and Answers on Megathrust Earthquakes". Natural Resources Canada. Government of Canada. 19 October 2018. Retrieved 23 September 2020.
  3. Johnston, Arch C.; Halchuk, Stephen (June–July 1993), "The seismicity data base for the Global Seismic Hazard Assessment Program", Annali di Geofisica, 36 (3–4): 133–151, pp. 140, 142 et seq.
  4. "Tsunami Terminology". The National Tsunami Hazard Mitigation Program History, 1995–2005. Pacific Marine Environmental Laboratory. Archived from the original on 2011-02-25.
  5. "Earthquake Glossary - dip slip". Earthquake Hazards Program. U.S. Geological Survey.
  6. Park, J.; Butler, R.; Anderson, K.; et al. (2005). "Performance Review of the Global Seismographic Network for the Sumatra-Andaman Megathrust Earthquake". Seismological Research Letters. 76 (3): 331–343. doi:10.1785/gssrl.76.3.331. ISSN 0895-0695.
  7. "A Major Earthquake in the Pacific Northwest Looks Even Likelier". The Atlantic. August 16, 2016.
  8. Bletery, Quentin; Thomas, Amanda M.; Rempel, Alan W.; Karlstrom, Leif; Sladen, Anthony; De Barros, Louis (2016-11-24). "Fault curvature may control where big quakes occur, Eurekalert 24-NOV-2016". Science. 354 (6315): 1027–1031. Bibcode:2016Sci...354.1027B. doi:10.1126/science.aag0482. PMID 27885027. Retrieved 2018-06-05.
  9. Ishikawa, Yuzo (February 2012). Re-evaluation of Mw of the 1707 Hoei earthquake (PDF). G-EVER1 Workshop. Tsukuba, Japan: Asia-Pacific Region Global Earthquake and Volcanic Eruption Risk Management (G-EVER1) Consortium.
  10. Gutscher, M.-A.; Baptista, M.A.; Miranda, J.M. (2006). "The Gibraltar Arc seismogenic zone (part 2): Constraints on a shallow east dipping fault plane source for the 1755 Lisbon earthquake provided by tsunami modeling and seismic intensity". Tectonophysics. 426 (1–2): 153–166. Bibcode:2006Tectp.426..153G. doi:10.1016/j.tecto.2006.02.025. ISSN 0040-1951.
  11. "M 9.1 - near the east coast of Honshu, Japan". Earthquake Hazards Program. USGS. 2016. Retrieved 21 November 2016.
  12. Kidd, Kenneth (12 March 2011). "How "mega-thrust" earthquake caught forecasters by surprise". Toronto Star. Retrieved 12 March 2011.
  13. Reilly, Michael (11 March 2011). "1722 UTC, 11 March 2011: Japan's largest ever earthquake". Short Sharp Science. New Scientist. Retrieved 11 March 2011.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.