Queensway tunnel

George's Dock ventilation and control station, Pier Head

The first tunnel under the River Mersey was for the Mersey Railway in 1886. The first tunnel crossing was proposed in 1825, and again in 1827. A report in 1830 rejected the road tunnel due to concerns about building damage.

During the 1920s there were concerns about the long queues of cars and lorries at the Mersey Ferry terminal, so once Royal Assent to a Parliamentary Bill was received, construction of the first Mersey road tunnel started in 1925, to a design by consulting engineer Sir Basil Mott. Mott supervised the construction in association with John Brodie, who, as City Engineer of Liverpool, had co-ordinated the feasibility studies made by consultant Engineers Mott, Hay and Anderson. The main contractor was Edmund Nuttall.[1] In 1928 the two pilot tunnels met to within less than 25 millimetres (1.0 in).

The tunnel entrances, toll booths and ventilation building exteriors were designed by architect Herbert James Rowse, who is frequently but incorrectly credited with the whole civil engineering project. Their decoration is by Edmund Thompson.[2] These are Grade II listed buildings. More than 1.2 million tons of rock, gravel, and clay were excavated; some of it was used to build Otterspool Promenade. Of the 1,700 men who worked on the tunnel during the nine years of its construction, 17 were killed.

At the time of its opening it was the longest road tunnel in the world, a title it held for 14 years until the opening of the Vielha Tunnel in Catalonia, Spain in 1948, though it remained the longest underwater tunnel as of 1955.[3] The tunnel, which cost a total of £8 million, was opened on 18 July 1934 by King George V; the opening ceremony was watched by 200,000 people. At the time it was known as the eighth wonder of the world.[4]

By the 1960s, traffic volume had increased, and, in 1971, the Kingsway tunnel opened to relieve congestion.

Toll booths at the Birkenhead entrance to the Queensway tunnel

One of the original Art Deco lamp pillars from Birkenhead, now the Monument to the Mersey Tunnel

The tunnel is 3.24 kilometres (2.01 mi) long. It contains a single carriageway of four lanes, two in each direction. Different height restrictions apply to the nearside and offside lanes in each direction, because of the curvature of the tunnel. These are 3.9 metres (13 ft) and 4.75 metres (15.6 ft) respectively, and there is a 3.5 t weight limit for goods vehicles. All buses are required to use the offside lane, regardless of their height.

Lane signals (consisting of an illuminated green arrow or red cross) are displayed at regular intervals, although in normal circumstances none of the lanes are currently used bidirectionally. This is in contrast to the Kingsway Tunnel, where lanes in toll concourse are alternated to prioritise higher traffic in one direction during peak hours.

The tunnel has two branches leading off the main tunnel to the dock areas on both sides of the river. The Birkenhead branch tunnel (known as the Rendel Street branch, or Dock Exit) was closed in 1965. When travelling in the Birkenhead direction, the branch can still be seen inside the tunnel on the right just before the left hand bend towards the Birkenhead exit. The exit of this branch can also be seen on the outside from Rendel Street near the junction with Marcus Street, just north of Cleveland Street in Birkenhead. This branch also carried 2 way traffic, single lane each way. It was also controlled by traffic lights inside the tunnel. This branch mainly served Birkenhead docks and for people travelling to the Wirral resort of New Brighton. These are now best served by the Kingsway tunnel. The Liverpool branch tunnel remains in use, in the exit direction only. It emerges opposite the Liver Building, next to the Atlantic Tower Hotel and Church of Our Lady and Saint Nicholas. Originally, it carried two-way traffic and the junction inside the tunnel was controlled by traffic lights, but this arrangement was discontinued to reduce the delays brought on by increasing traffic levels.

The lighting inside the tunnel was updated in 1981 to replace the amber fluorescent tubes on the walls of the tunnel. The reason given for the change was that the old lighting was ineffective and inefficient. It also caused a flicker effect on vehicle windscreens, which could induce epileptic reactions in susceptible people.

Tolls

An original tollbooth, now preserved in Liverpool

Tolls have been a feature of tunnel use since the Queensway Tunnel opened in 1934. Although residents were originally told tolls would be removed when debts were repaid, this position was dropped long ago. Debts and tolls were increased when the Kingsway Tunnel was built in 1971 to relieve congestion in the first tunnel. The County of Merseyside Act 1980 enshrined in law the right to continue collecting tolls once the debts were repaid. The later 2004 Act created a legal position where tolls charged must rise in line with the Retail Price Index (RPI) as published in November.[5]

In April 2004 construction began of seven emergency refuges below the road deck, each capable of holding 180 people, as part of a £9 million project to bring the tunnel into line with the highest European safety standards. Each refuge is 21 metres (69 ft) long and 3 metres (9.8 ft) wide, accessible from the main tunnel walls. The refuges have fire resistant doors, ramps for wheelchair access, a supply of bottled water, a toilet, and a video link to the Mersey Tunnels Police control room. All seven refuges are linked by a walkway below the road surface, with exits at the Liverpool and Birkenhead ends.

In 2012 the tunnel was refurbished, with 5999 added panels – ceramic steel cladding replacing the old plastic corrugated wall cladding to improve lighting and to give the Tunnel a 21st Century look.[7]

As of April 2018 the toll is £1.80 per journey[8] for a single passenger car of typical size, with progressively higher tolls for larger vehicles; solo motorcycles are free.[8] Average daily traffic through the tunnel currently stands at 35,000 vehicles, which equates to just under 12.8 million per year.[9]

In September 2009, a scene from Harry Potter and the Deathly Hallows – Part 1 set in the Dartford Crossing was filmed in Queensway tunnel, where Harry skips on a bus while on Hagrid's enchanted motorbike was filmed in the tunnel.[9] In 2012 the tunnel was used for the filming of a chase scene for Fast & Furious 6.[10] In March 2018, the tunnel was used for the filming of Yesterday, directed by Danny Boyle.[11] The two main characters are frolicking in an empty tunnel when the bright yellow words "Hello Goodbye" are rolling through the tunnel. Also in 2018 the tunnel was a location for the BBC TV series The City and the City, where it served as the gateway between the two cities.

The Dubliners popularised the song "I Wish I Was Back in Liverpool" which includes a verse about the building of the Queensway Tunnel.

• Architecture of Liverpool
• Listed buildings in Birkenhead

Wikimedia Commons has media related to Queensway Tunnel.

• Moore, Jim (1998) Underground Liverpool, Liverpool : Bluecoat Press, ISBN 1-872568-43-2
• Ian Jackson, Simon Pepper, Peter Richmond: Herbert Rowse (2019) Historic England ISBN 978-1-84802-549-3

• Official website of the Mersey Tunnels