Senator George Sellar Bridge
The Senator George Sellar Bridge at Wenatchee, Washington was built in 1950 to carry U.S. Route 2 across the Columbia River. The steel suspended tied-arch bridge has a main span of 480 feet (150 m) with 224-foot (68 m) anchor arms. The suspended portion of roadway comprises 352 feet (107 m) and is 54 feet (16 m) wide, carrying five lanes (originally four) with a median divider strip at a height of 180 feet (55 m) above mean water level. The 1950 bridge replaced the nearby Columbia River Bridge built in 1908. The new bridge was recognized by the American Institute of Steel Construction as the most beautiful bridge of 1950 for spans over 400 feet (120 m) in length.[3]
Senator George Sellar Bridge | |
---|---|
Coordinates | 47°24′35″N 120°17′44″W |
Carries | US 2 |
Crosses | Columbia River |
Locale | East Wenatchee, Washington / Wenatchee, Washington |
Maintained by | State of Washington |
Characteristics | |
Design | Through arch bridge |
Total length | 1,208 feet (368 m) |
Longest span | 480 feet (150 m) |
Clearance below | 85 feet (26 m)[1] |
History | |
Opened | October 28, 1950 |
Replaces | Columbia River Bridge (Wenatchee, Washington) |
Location in Washington | |
Nearest city | Wenatchee, Washington |
Area | less than one acre |
Built | 1950 |
Built by | Washington State Department of Highways |
MPS | Bridges of Washington State MPS |
NRHP reference No. | 95000623[2] |
Added to NRHP | May 24, 1995 |
Location | |
The bridge's engineer was R. W. Finke. The contractor was the General Construction Company of Seattle, using steel fabricated by the American Bridge Company. The bridge rests on two concrete piers in the river, with the central arch between them, and cantilever spans extending to concrete abutments high on the riverbanks.[3] Now named the Senator George Sellar Bridge after a Washington state senator, the bridge carries Washington State Route 285 since the construction of the Richard Odabashian Bridge for Route 2 farther north. An additional lane was added in 2009–2010.[4] The bridge was placed on the National Register of Historic Places on May 24, 1995.[5]
See also
- Transport portal
- Engineering portal
- United States portal
- List of crossings of the Columbia River
References
- "National Register of Historic Places Registration Form: Columbia River Bridge at Wenatchee" (PDF). National Park Service. Retrieved 2011-09-01.
- "National Register Information System". National Register of Historic Places. National Park Service. July 9, 2010.
- Krier, Robert H.; Barber, J. Byron; Bruce, Robert; Holstine, Craig (December 12, 1991). "National Register of Historic Places Registration Form: Columbia River Bridge at Wenatchee" (PDF). National Park Service. Retrieved 1 September 2011.
- "George Sellar Bridge to Open for Pedestrians". Manson Village Tribune. September 22, 2009. Retrieved 1 September 2011.
- "Nomination Form for Senator George Sellar Bridge". National Park Service. and accompanying pictures