U.S. Route 195

US 195 runs 94.02 miles (151.31 km) in Idaho and Washington and is listed in its entirety as part of the National Highway System,[4][5] a system of roads crucial to the nation's economy, defense and mobility.[6] As a state highway in both states, the roadway is maintained by the Idaho Transportation Department (ITD) and Washington State Department of Transportation (WSDOT).[1]

Washington

US 195 traveling along Hangman Creek in Spokane, viewed from the east

US 195 travels 93.37 miles (150.26 km) north through the Palouse region of Eastern Washington, from the Idaho state line north to Spokane.[1] The highway serves as an important link between Pullman and Spokane as well as part of the Palouse Scenic Byway and a main north–south route in the region alongside State Route 27 (SR 27).[10][11][12] US 195 enters Washington north of Clarkston in unincorporated Whitman County and travels west to an intersection with its 0.61-mile-long (0.98 km) spur route, providing a connection to US 95 northbound towards Moscow. The highway continues northwest through farmland and the towns of Uniontown and Colton along Union Flat Creek towards Pullman.[13][14][15] US 195 intersects SR 27, also part of the Palouse Scenic Byway,[11] and travels west of Pullman on a highway bypass of the city. The bypass travels through the termini of SR 194 and SR 270 as it leaves the Pullman area heading north towards Colfax along the South Fork Palouse River.[16][17] US 195 becomes Main Street within Colfax and travels through the town along a WSDOT rail line to the eastern terminus of SR 272 and SR 26.[18][19] The highway continues north along Pine Creek and the WSDOT rail line past the northern terminus of SR 271, a diamond interchange south of Rosalia,[20][21] before leaving the Palouse Scenic Byway at the Spokane County border.[11][12] The roadway heads north through a diamond interchange in Plaza and along Spangle Creek past the community of Spangle.[22][23][24] US 195 enters the city of Spokane as a four-lane highway along Hangman Creek and ends at a partial cloverleaf interchange with I-90, cosigned with US 2 and US 395.[7][25][26]

US 195 is defined by the Washington State Legislature as SR 195, part of the Revised Code of Washington as §47.17.380.[27] Every year, WSDOT conducts a series of surveys on its highways in the state to measure traffic volume. This is expressed in terms of AADT, which is a measure of traffic volume for any average day of the year. In 2012, WSDOT calculated that the busiest section of US 195 within Washington was in Hangman Valley before the I-90 interchange in Spokane, serving 19,000 vehicles, while the least busiest section was between Pullman and Colfax, serving 3,100 vehicles.[28] The entire route of US 195 is designated as a Highway of Statewide Significance by WSDOT,[29] which includes highways that connect major communities in the state of Washington.[30]

The Inland Empire Highway was originally a collection of gravel county roads that have existed since 1898 in the Spokane area and 1905 in the Pullman area.[31][32][33] These roads roughly followed an early territorial highway built in the 1870s between Colfax and Spokane.[34] The highway was added to the state highway system in 1913, traveling within the Palouse region between Colfax and Spokane. The Second Division of the Eastern Route of the Inland Empire Highway was also established in 1913, traveling northwest from Sampson Trail Y at the Idaho–Washington state line to Pullman.[35][36] The Idaho portion of US 195 became part of the North and South Highway in 1916 and was not numbered under Idaho's state highway system in 1953.[37][38] The gap in the Second Division between Pullman and Colfax was named by Whitman County as a highway of importance the following year and was not built until 1925 as part of State Road 3.[39][40] State Road 23, connecting Spokane to Newport, was designated in 1915 before it was renamed to the Pend O'Reille Highway and renumbered to State Road 6 in 1923.[41][42][43] The Inland Empire Highway was numbered as State Road 3 in 1923 and retained the designation as PSH 3 in 1937, while State Road 6 became PSH 6.[43][44]

Shields of US 195, circa 1961, and former PSH 3

The United States Highway System was established on November 11, 1926, during its adoption by the American Association of State Highway Officials (AASHO) and included US 195, traveling north from US 95 within Washington through Pullman and Spokane before ending at US 95 in Sandpoint, Idaho.[3][45] The present four-lane divided highway along Hangman Creek in Spokane was constructed in 1939 as part of general improvements to Eastern Washington highways, relocating the route of the creek and a nearby Northern Pacific Railway line.[46] The section of US 195 between Spokane and Sandpoint became co-signed with an extension of US 2 from Bonners Ferry, Idaho to Everett, Washington in 1946,[47] and the highway was truncated to US 10 and US 395 in 1969.[48] During the 1964 highway renumbering, Washington converted its highways to the present state route system, to take effect in 1970. US 195 replaced PSH 3 and its branches along its present route,[27][49] with its southern terminus at US 95 atop Lewiston Hill in Idaho and its northern terminus at I-90 in Spokane at an interchange that was opened in December 1965, along with a new 7.2-mile (11.6 km) segment between Thornton and Rosalia.[50][51]

The State Department of Highways completed construction of three highway bypasses between 1973 and 1975, avoiding Pullman, Rosalia, and Plaza,[52][53][54] using funding originally intended for the canceled Bay Freeway project in Seattle.[55][56] US 95 was relocated onto its present freeway, bypassing Washington state, in 1979 and US 195 was extended south into Idaho to the new interchange with a spur route traveling towards northbound US 95.[27][57] The highway between Uniontown and Rosalia was designated as part of the Palouse Scenic Byway on December 19, 2002, as part of the Washington State Scenic and Recreational Highways program.[58][59] In 2002, WSDOT adopted a long range plan to upgrade US 195 within the Hangman Valley in Spokane to limited-access standards by constructing new interchanges at four intersections.[60] One of the interchanges, at Cheney–Spokane Road, was completed in 2014 at a cost of $9.4 million.[61] Funding for the remaining interchange projects, estimated to cost $106 million in 2002 dollars, was not allocated and WSDOT is instead considering lower-cost improvements to the intersections.[60][62] Increased traffic congestion on US 195 in Spokane lead to a development moratorium in place until capacity improvements are made to the highway.[63] The first ramp meter in the Spokane area was installed at US 195's interchange with I-90 in 2019.[64]

US 195 has a 0.54-mile-long (870 m) spur route near its southern terminus on the Washington–Idaho state line that travels east from US 195 to serve US 95 northbound atop Lewiston Hill.[1][8][65] The unsigned highway, also known as the Genesee Spur, was established in 1979 on the former alignment of US 95 as it passed briefly through Washington before it was moved onto its present alignment.[27][57] WSDOT included the road in its annual AADT survey in 2012 and calculated that 100 vehicles per day used the spur route.[28] ITD designates the spur route as US-95 Spur in their milepoint log.[2]

Major intersections

The entire route is in Whitman County.

Location	mi[1]	km	Destinations	Notes
​	0.00	0.00	US 195 (Palouse Scenic Byway) – Pullman, Uniontown	Southern terminus; US 195 south is former US 95 south
Washington–Idaho state line	0.54	0.87	US 95 Spur north – Moscow	Continuation into Idaho; former US-95 north
1.000 mi = 1.609 km; 1.000 km = 0.621 mi       Route transition

Wikimedia Commons has media related to U.S. Route 195.

• US 195 at US Highway Ends
• US 195 at Highways of Washington State