Amine oxide

Amine oxides are surfactants commonly used in consumer products such as shampoos, conditioners, detergents, and hard surface cleaners.[1] Alkyl dimethyl amine oxide (chain lengths C10–C16) is the most commercially used amine oxide.[2] They are considered a high production volume class of compounds in more than one member country of the Organisation for Economic Co-operation and Development (OECD); with annual production over 26,000, 16,000 and 6,800 metric tons in the US, Europe, and Japan, respectively.[1] In North America, more than 95% of amine oxides are used in home cleaning products.[3] They serve as stabilizers, thickeners, emollients, emulsifiers, and conditioners with active concentrations in the range of 0.1–10%.[1] The remainder (< 5%) is used in personal care, institutional, commercial products[4] and for unique patented uses such as photography.[1]

Lauryldimethylamine oxide, a fatty amine derivative, is a germicidal ingredient in many cosmetics.

Amine oxides are used as protecting group for amines and as chemical intermediates. Long-chain alkyl amine oxides are used as amphoteric surfactants and foam stabilizers.

Amine oxides are highly polar molecules and have a polarity close to that of quaternary ammonium salts. Small amine oxides are very hydrophilic and have an excellent water solubility and a very poor solubility in most organic solvents.

Amine oxides are weak bases with a pK_b of around 4.5 that form R₃N⁺−OH, cationic hydroxylamines, upon protonation at a pH below their pK_b.

Almost all amine oxides are prepared by the oxidation of either tertiary aliphatic amines or aromatic N-heterocycles. Hydrogen peroxide is the most common reagent both industrially and in academia, however peracids are also important.[5] More specialised oxidising agents can see niche use, for instance Caro's acid or mCPBA. Spontaneous or catalysed reactions using molecular oxygen are rare. Certain other reactions will also produce amine oxides, such as the retro-Cope elimination, however they are rarely employed.

Amine oxides exhibit many kinds of reactions.[6]

• Pyrolytic elimination. Amine oxides, when heated to 150–200 °C eliminate a hydroxylamine, resulting in an alkene. This pyrolytic syn-elimination reaction is known under the name Cope reaction. The mechanism is similar to that of the Hofmann elimination.
• Reduction to amines. Amine oxides are readily converted to the parent amine by common reduction reagents including lithium aluminium hydride, sodium borohydride, catalytic reduction, zinc / acetic acid, and iron / acetic acid. Pyridine N-oxides can be deoxygenated by phosphorus oxychloride
• Sacrificial catalysis. Oxidants can be regenerated by reduction of N-oxides, as in the case of regeneration of osmium tetroxide by N-methylmorpholine N-oxide.
• O-alkylation. Pyridine N-oxides react with alkyl halides to the O-alkylated product
• Bis-ter-pyridine derivatives adsorbed on silver surfaces are discussed to react with oxygen to bis-ter-pyridine-N-oxide. This reaction can be followed by video-scanning tunneling microscopy with sub-molecular resolution.[7]
• In the Meisenheimer rearrangement (after Jakob Meisenheimer) certain N-oxides R₁R₂R₃N⁺O⁻ rearrange to hydroxylamines R₂R₃N−O−R₁[8][9]

in a 1,2-rearrangement:

or a 2,3-rearrangement:

• In the Polonovski reaction a tertiary N-oxide is cleaved by acetic acid anhydride to the corresponding acetamide and aldehyde:[10][11][12]

Amine oxides are common metabolites of medication and psychoactive drugs. Examples include nicotine, Zolmitriptan, and morphine.

Amine oxides of anti-cancer drugs have been developed as prodrugs that are metabolized in the oxygen-deficient cancer tissue to the active drug.

Amine oxides (AO) are not known to be carcinogenic, dermal sensitizers or cause reproductive toxicity. They are readily metabolized and excreted if ingested. Chronic ingestion by rabbits found lower body weight, diarrhea, and lenticular opacities at a lowest observed adverse effect levels (LOAEL) in the range of 87–150 mg AO/kw bw/day. Tests of human skin exposure have found that after 8 hours less than 1% is absorbed into the body. Eye irritation due to amine oxides and other surfactants is moderate and temporary with no lasting effects.[1]

Amine oxides with an average chain length of 12.6 have been measured to be water-soluble at ~410 g L⁻¹. They are considered to have low bioaccumulation potential in aquatic species based on log Kow data from chain lengths less than C14 (bioconcentration factor < 87%).[1] Levels of AO in untreated influent were found to be 2.3–27.8 ug L⁻¹, while in effluent they were found to be 0.4–2.91 ug L⁻¹. The highest effluent concentrations were found in oxidation ditch and trickling filter treatment plants. On average, over 96% removal has been found with secondary activated sludge treatment.[2] Acute toxicity in fish, as indicated by 96h LC50 tests, is in the range of 1,000–3,000 ug L⁻¹ for carbon chain lengths less than C14. LC50 values for chain lengths greater than C14 range from 600 to 1400 ug L⁻¹. Chronic toxicity data for fish is 420 ug/L. When normalized to C12.9, the NOEC is 310 ug L⁻¹ for growth and hatchability.[2]

• Functional group
• Amine, NR₃
• Hydroxylamine, NR₂OH
• Phosphine oxide, PR₃=O
• Sulfoxide, R₂S=O
• Azoxy, RN=N⁺(O⁻)R RN=N⁺RO⁻
• Aminoxyl group Radicals with the general structure R₂N–O•
• Category:Amine oxides, containing all articles on specific amine-oxide compounds

• Chemistry of amine oxides
• Surfactants, types and uses (pdf)
• The amine oxides homepage
• Nomenclature of nitrogen compounds
• IUPAC definition