Signature Tower Jakarta

Signature Tower is a proposed skyscraper in Jakarta, Indonesia. The proposed height is 638 m (2,093 ft).

Signature Tower
General information
StatusProposed
TypeOffice and hotel[1]
LocationJl. Jendral Sudirman Kav 52–53, Sudirman Central Business District, Kebayoran baru, Jakarta, Indonesia
Coordinates6.2262°S 106.8098°E / -6.2262; 106.8098
Height
Architectural638 m (2,093 ft)
Tip638 m (2,093 ft)[1]
Top floor515.8 m (1,692 ft)[1]
Observatory515.8 m (1,692 ft)
Technical details
Floor count113 above ground and 6 below[1]
Design and construction
ArchitectSmallwood, Reynolds, Stewart, Stewart[1]
DeveloperPT Grahamas Adisentosa[1]
PT Danayasa Arthatama[2]

It was originally proposed in 2010 and was slated to begin construction in 2015. Planning permission for the tower was granted in late 2015. Construction was scheduled to begin in the third quarter of 2016, assuming a loan of approximately $1.5 billion could be successfully secured.[3][4] China State Construction Engineering has been appointed to construct the tower.[5]

The skyscraper is a part of a 45-hectare redevelopment project (Sudirman Central Business District) SCBD, near the Semanggi Interchange, and is just south of the Gelora Bung Karno Stadium. It is within the Golden Triangle of Jakarta in Jakarta, where the majority of major development areas are located. When completed, the structure will include 6 basement floors used for parking space, while the podium will feature retail, convention and entertainment venues, with the rest of the skyscraper used as office and residential space.[6]

Engineering and design

Due to the presence of unstable alluvial deposits within the Jakarta Basin and the seismic prone area from where the skyscraper will be built, the design must comply with seismic criteria using a probabilistic seismic hazard analysis (PSHA) defined by the Pacific Earthquake Engineering Research Center (PEER), Tall Buildings Provisions and the American Society of Civil Engineers (ASCE). In addition, wind tunnel tests must be conducted under city regulations due to the height of the building exceeding 50 stories and 200 m (656 ft). Aerodynamic testing was performed by applying a scaled wind velocity on a 1:500 scale model of the skyscraper equivalent to applying an average hourly wind velocity of 40 m/s (130 ft/s) on the actual design.[6]

On 13 July 2017, acting governor of Jakarta Djarot Syaiful Hidayat attended a regional meeting with the developers, discussing about the UDGL (Urban Design Guide Line) and finally reached an agreement to integrate the tower with the ongoing developments of the Jakarta MRT. Djarot later sent a letter to Indonesian President Joko Widodo, requesting him to make the tower to become a national icon.[7]

Foundation

To accommodate the basement floor levels, 23.5 m (77 ft) had to be excavated and dewatered prior to construction. Drilled shaft bore piles measuring 1.2 m (4 ft) in diameter and 90 m (295 ft) in length with a spacing of 3.6 m (12 ft) were suspended within a 6.5 m (21 ft) to 7.5 m (25 ft) thick mat foundation system designed to resist wind and seismic loads. This technique also redistributes axial loads on top of the harder and denser sediment underlying the alluvium. Surrounding the basement wall is a 1.1 m (4 ft) thick slurry wall designed to withstand and retain both groundwater and soil pressures.[6]

Structure

To withstand lateral loads, a "core-outrigger-mega-frame" system consisting of two major components will be used. The primary system will feature a composite concrete core connected to 8 surrounding super columns all suspended within a network of steel outrigger trusses that spans 2 stories. A mega frame consisting of a network of 9 belt trusses interlocking the super columns together will make up the secondary system that surrounds the primary structure. The super columns will eventually thin and slope towards the apex to match the profile of the architectural tip. The 31 m (102 ft) square concrete core that houses the elevator shafts and stairwells will thin to .6 m (2 ft) near the top from a ground thickness of 1.1 m (4 ft) to accommodate additional space. The floors residing between the primary and secondary systems will feature a hybrid design consisting of concrete slabs on top of a metal deck to reduce construction time and reduce additional loads.[6]

See also

References
  1. "Signature Tower Jakarta". www.skyscrapercenter.com. Retrieved 2 November 2018.
  2. Tedjasukmana, Jason (April 17, 2012). "Does Jakarta Need a 111-Story Tower?". Time. Retrieved April 23, 2017.
  3. "Pengelola SCBD Siap Galang Dana US$ 1,45 Miliar". Investor Daily Indonesia. 22 March 2016.
  4. "Grahamas seeks $1.5bn for 111-storey Jakarta tower". GlobalCapital. March 21, 2016. Retrieved January 14, 2017.
  5. "Chinese Builder Awarded Contract to Begin Construction on Luxury Apartment Project in Alam Sutera". Jakarta Globe. Retrieved 22 November 2017.
  6. Wijanto, Sugeng; Prasetyoadi, Tiyok (2012). "The Signature Tower: Reaching High in the Sky of Indonesia" (PDF). global.ctbuh.org. Retrieved April 23, 2017.
  7. "Gedung Tertinggi Se-Asia Tenggara Akan Terintegrasi MRT". Detik. Retrieved 17 July 2017.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.