Tide-class tanker

The Tide class are a 200.9 m (659 ft 1 in), 39,000 t[8] derivative of BMT Defence Services' AEGIR-26 design,[9] whose origins lie in a civilian tanker from Skipskonsulent of Norway.[10] They are double-hulled to reduce or prevent oil being lost by damage to the outer hull, in line with the MARPOL regulations for civilian tankers (from which military tankers are partially exempt). As well as being safer, this means that Tides can go to places that discouraged their single-hulled predecessors - the recently decommissioned Rover-class vessels and Leaf-class tankers.[11]

There are three stations for replenishment at sea (RAS) abeam, of diesel oil, aviation fuel and fresh water. The flight deck and helicopter hangar allow vertical RAS.[1] The flight deck is large and strong enough for a Chinook helicopter to land on.[12] Propulsion uses medium-speed diesel engines driving twin shafts[13] in a hybrid CODELOD (Combined Diesel Electric Or Diesel) arrangement[14] designed for fuel efficiency across a wide range of speeds.

BMT offer the AEGIR fleet tanker in three sizes. The AEGIR-10, AEGIR-18 and AEGIR-26 are 10,000 DWT, 18,000 DWT and 26,000 DWT respectively, and can carry 8,000 m³ (2,100,000 US gal), 16,000 m³ (4,200,000 US gal) and 24,000 m³ (6,300,000 US gal) of fuel.[13] The AEGIR-18R replenishment ship trades a third of its fuel capacity for 1,350 m³ (48,000 cu ft) of dry stores in an extended superstructure.[13] The standard AEGIR-18 has less range (10,000 nautical miles (19,000 km; 12,000 mi)) and is slower (18 knots (33 km/h; 21 mph)) than the British version.[13]

The design has been entered in a number of competitions, but as of March 2016 the only foreign order has been for an AEGIR-18R derivative from the Royal Norwegian Navy in 2013 (see below). The AEGIR-18A, a derivative of the AEGIR-18R like the Norwegian ship but with among other things better air-conditioning, was offered to Australia for Project SEA 1654 Phase 3, a requirement for two supply ships to replace HMAS Success and HMAS Sirius.[15] In June 2014 it was shortlisted along with the Buque de Aprovisionamiento en Combate, which would be built in Spain by Navantia,[15] who have built most of Australia's recent warships. In March 2016 Australia announced it would be buying the Spanish ship.[16] In March 2016 Daewoo also lost out to Hyundai in a competition to supply New Zealand with a tanker.[17] A 2014 Daewoo presentation points out that India, Singapore and Brazil all need new supply ships in the near future.[18]

Tiderace and Tidesurge in Falmouth, England.

First steel was cut on 24 June 2014 for RFA Tidespring,[7] and she was named in a ceremony on 7 October 2015.[19] She was expected to arrive in Falmouth in spring 2016 to allow A&P Group to fit military equipment such as communications gear.[20] Following sea trials, Tidespring was to enter service in the fourth quarter of 2016,[21] with her three sister ships following at six-month intervals.[22] In August 2016 it was reported that RFA Tidespring was still undergoing trials with builder Daewoo Shipbuilding and Marine Engineering (DSME) in South Korea;[23] procurement minister Harriett Baldwin has blamed "delays in finalising elements of electrical design and the installation of Multi-Cable Transit insulation in accordance with new legislative regulations" which have now been resolved.[24] Tidespring reached the UK in spring 2017, docking at Falmouth on 2 April for seventeen weeks to fit weapons and communications gear.[25] Four months of acceptance trials will follow;[25] her sisters will enter service by the end of 2018.[24]

HNoMS Maud[31] was ordered on 28 June 2013[18] to replace HNoMS Tyr and HNoMS Valkyrien[32] at a cost of NOK1,320m[32] (~£140m)[33] with 100% offsets.[32] She is based on the AEGIR-18R design.[9] but includes a 48-bed[34] hospital underneath the flight deck with an operating theatre, isolation ward and CT scanner.[35] She can carry 7000 tonnes of F76 fuel oil, 300 tonnes of F44/JP-5 jet fuel, 200 tonnes of ammunition and 40 ISO containers or a mix of vehicles and boats.[18] She has two abeam RAS rigs and a stern reel, and a 25-tonne deck crane.[18] A side ramp allows easy access for vehicles and for the support of submarines and other small vessels.[18] The flight deck can accommodate helicopters up to CH-53 Super Stallion size, and the hangar can operate one NH90 with level 2 maintenance or stow a second.[18] The core crew will be 40-50, with accommodation for 100 more if needed;[32] facilities include a gym and sauna.[18] Four Sea PROTECTOR remote weapon stations are planned.[18]

First steel for Maud was cut on 14 April 2015.[18] Delivery was planned for 30 September 2016 followed by acceptance trials in Norway in early 2017, and then FOST in the UK and other exercises before full entry into service in January 2018.[18] However, delivery was postponed due to technical problems and the vessel was finally commissioned in Norway in May 2019. [36]