AirTrain JFK

The first proposal for a direct rail link to JFK Airport was made in 1968, when the Metropolitan Transportation Authority (MTA) suggested extending the Long Island Rail Road (LIRR) to the airport as part of the Program for Action, an ambitious transportation expansion program for the New York City area.[6][7] Ultimately, the rail link was canceled altogether due to the New York City fiscal crisis of 1975.[8] Another proposal, made by the Port Authority of New York and New Jersey in 1987, called for a rail line to connect all of JFK Airport's terminals with a new $500 million transportation center.[9] The Port Authority withdrew its plans in 1990 after airlines objected that they could not fund the proposal.[10][11]

The MTA operated the JFK Express, a premium-fare New York City Subway service that connected Midtown Manhattan to the Howard Beach–JFK Airport station, from 1978 to 1990.[12][13] The route carried subway passengers to the Howard Beach station,[14] where passengers would ride shuttle buses to the airport.[13][15] The shuttle buses transported passengers between the different airport terminals within JFK's Central Terminal Area, as well as between Howard Beach and the terminals.[16] The JFK Express service was unpopular with passengers because of its high cost, and because the buses often got stuck in traffic.[17][18]

Two-car AirTrain seen from Terminal 4

By the 1990s, there was demand for a direct link between Midtown Manhattan and JFK Airport, which are 15 miles (24 km) apart by road. During rush hour, the travel time from JFK to Manhattan could average up to 80 minutes by bus; during off-peak hours, a New York City taxi could make that journey in 45 minutes, while a bus could cover the same distance in an hour.[7] The Port Authority, foreseeing economic growth for the New York City area and increased air traffic at JFK, began planning for a direct rail link from the airport to Manhattan. In 1991, the Port Authority introduced a Passenger Facility Charge (PFC),[7] a $3 tax on every passenger departing from JFK,[7][11][19] which would provide $120 million annually.[20]

In 1990, the MTA proposed a $1.6 billion rail link to LaGuardia and JFK airports, which would be funded jointly by federal, state, and city government agencies.[18] The rail line was to begin in Midtown Manhattan, crossing the East River into Queens via the Queensboro Bridge.[21] It would travel to LaGuardia Airport, then make two additional stops at Shea Stadium and Jamaica before proceeding to JFK.[18][22] After the Port Authority found that the ridership demand might not justify the cost of the rail link, the MTA downgraded the project's priority.[23] The proposal was supported by governor Mario Cuomo[11] and Queens borough president Claire Shulman.[17][21] The transport advocacy group Regional Plan Association (RPA) called the plan "misguided", and the East Side Coalition on Airport Access's executive director said, "We are going to end up with another [...] uncompleted project in this city."[21]

The Port Authority started reviewing blueprints for the JFK rail link in 1992. At the time, it was thought that the link could be partially open within six years.[20] In 1994, the Port Authority set aside $40 million for engineering and marketing of the new line, and created an environmental impact statement (EIS).[24] The project's budget had grown to $2.6 billion by that year.[24] The EIS, conducted by the New York State Department of Transportation and the Federal Aviation Administration (FAA), found the plan to be feasible, though the project attracted opposition from area residents and advocacy groups.[25]

An AirTrain in front of the TWA Flight Center

The project was to start in 1996, but there were disputes over where the Manhattan terminal should be located. The Port Authority had suggested the heavily-trafficked corner of Lexington Avenue and 59th Street,[21][24] though many nearby residents opposed the Manhattan terminal outright.[26] The Port Authority did not consider a connection to the more-highly used Grand Central Terminal or Penn Station because such a connection would have been too expensive and complicated.[21] To pay for the project, the Port Authority would charge a one-way ticket price of between $9 and $12.[21] By February 1995, the cost of the planned link had increased to over $3 billion in the previous year alone. As a result, the Port Authority considered abridging the rail link plan, seeking federal and state funding, partnering with private investors, or terminating the line at a Queens subway station.[21]

The direct rail connection between Manhattan, LaGuardia Airport, and JFK Airport was canceled outright in May 1995.[17][27][28] The plan had failed to become popular politically, as it would have involved increasing road tolls and PATH train fares to pay for the new link.[27] In addition, the 1990s economic recession meant that there was little chance that the Port Authority could fund the project's rising price.[27][29] Following the cancellation, the planned connection to JFK Airport was downsized to a 7.5-mile (12.1 km) monorail or people mover, which would travel between Howard Beach and the JFK terminals.[17] The Port Authority initially proposed building a $827 million monorail, similar to AirTrain Newark at Newark Airport, which would open the following year.[30] In August 1995, the FAA approved the Port Authority's request to use the PFC funds for the monorail plan[29] (the agency had already collected $114 million, and was planning to collect another $325 million).[28] After the monorail was approved, the Port Authority hoped to begin construction in 1997 and open the line by 2002.[28][29]

The Port Authority voted to proceed with the scaled-down system in 1996.[31] Its final environmental impact statement (FEIS) for the JFK people mover, released in 1997, examined eight possibilities.[32] Ultimately, the Port Authority opted for a light rail system with the qualities of a people mover, tentatively called the "JFK Light Rail System".[33] It would replace the shuttle buses, running from the airport terminals to either Jamaica or Howard Beach.[3] The FEIS determined that an automated system with frequent headways was the best design.[34][35][36] According to The New York Times, in the 30 years between the first proposal and the approval of the light rail system, 21 recommendations for direct rail links to New York-area airports had been canceled.[35]

While Governor Pataki supported the revised people-mover plan, Mayor Rudy Giuliani voiced his opposition on the grounds that the city would have to contribute $300 million, and that it was not a direct rail link from Manhattan, and thus would not be profitable because of the need to transfer from Jamaica.[35][37][38] The Port Authority was originally planning to pay for only $1.2 billion of the project, and use the other $300 million to pay the rent at the airport instead.[35][37] In order to give his agreement, Giuliani wanted the Port Authority to study extending the Astoria elevated to LaGuardia Airport, as well as making the light-rail system compatible with the subway or LIRR to allow possible future interoperability.[39] He agreed to the plan in 1997 when the state agreed to reimburse the city for its share of the system's cost.[35][40] As part of the agreement, the state would also conduct a study on a similar train link to LaGuardia Airport.[40] By that time, the Port Authority had collected $441 million in PFC funds.[37]

In 1999, the RPA published a report in which it recommended the construction of new lines and stations for the New York City Subway. The plan included one service that would travel from Grand Central Terminal to JFK Airport via the JFK Light Rail.[41] Ultimately, the MTA rejected the RPA's proposal.[42]

AirTrain viaduct over the Van Wyck Expressway

The Port Authority could only use the funds from the Passenger Facility Charge to make improvements that exclusively benefited airport passengers. As a result, only the sections linking Jamaica and Howard Beach to JFK Airport were approved and built, since it was expected that airport travelers would be the sole users of the system.[34] The federal government approved the use of PFC funds for the new light rail system in February 1998. Some $200 million of the project's cost was not eligible to be funded from the PFC tax because, according to the FAA, the tax funds could not be used to pay for "any costs resulting from an over-designed system", such as fare collection systems.[43]

Construction of the system began in May 1998.[44][45] Most of the system was built one span at a time, using cranes mounted on temporary structures that erected new spans as they progressed linearly along the structures. Several sections were built using a balanced cantilever design, where two separate spans were connected to each other using the span-by-span method.[46] The Jamaica branch's location above the median of the busy Van Wyck Expressway, combined with the varying length and curves of the track spans, caused complications during construction. One lane of the Van Wyck had to be closed in each direction during off-peak hours, causing congestion.[45]

The route ran mostly along existing rights-of-way, but three commercial properties were expropriated and demolished to make way for new infrastructure.[47] Members of the New York City Planning Commission approved the condemnation of several buildings along the route in May 1999 but voiced concerns about the logistics of the project. These concerns included the projected high price of the tickets, ridership demand, and unwieldy transfers at Jamaica.[48]

Though community leaders supported the project because of its connections to the Jamaica and Howard Beach station, almost all the civic groups along the Jamaica branch's route opposed it due to concerns about nuisance, noise, and traffic.[48] There were multiple protests against the AirTrain project; during one such protest in 2000, a crane caught fire in a suspected arson.[49] Homeowners in the vicinity believed the concrete supports would lower the value of their houses.[45] Residents were also concerned about the noise that an elevated structure would create,[17] and according to a 2012 study, the majority of residents' complaints were due to "nuisance violations".[45] The Port Authority responded to residents' concerns by imposing strict rules regarding disruptive or loud construction activity, as well as implementing a streamlined damage claim process to compensate homeowners.[50] Through 2002, there were 550 nuisance complaints over the AirTrain's construction, of which 98% had been resolved by April of that year.[51] Not all community boards saw a high level of complaints; Queens Community Board 12, which includes the neighborhood of South Jamaica along the AirTrain's route, recorded few complaints about the construction process.[52]

The Air Transportation Association of America (ATA) filed a federal lawsuit in January 1999 alleging misuse of PFC funds. In March, a federal judge vacated the project's approval because the FAA had incorrectly continued to collect and make use of comments posted after the deadline for public comment, but found that the PFC funds had not been misused.[53][54] The FAA opened a second request for public comment and received a second approval.[54][55] In 2000, two local advocacy groups filed a second federal lawsuit, claiming that the FEIS had published misleading statements about the effects of the elevated structure on southern Queens neighborhoods.[56] The ATA and the two advocacy groups appealed the funding decision.[57] The ATA later withdrew from the lawsuit, but one of the advocacy groups proceeded with the appeal and lost.[57][58]

By the time the appeal was decided in October 2000, two-thirds of the system's viaduct structures had been erected.[57] Construction progressed quickly, and the system was ready for its first test trains by that December.[56] In May 2001, a $75 million renovation of the Howard Beach station was completed;[59] the rebuilt station contained an ADA-compliant transfer to and from the AirTrain.[60] The same month, work started on a $387 million renovation of the Jamaica LIRR station, which entailed building a transfer passageway to the AirTrain.[59][60] Though the Jamaica station's rehabilitation was originally supposed to be finished by 2005,[51] it was not actually completed until September 2006.[61] Two AirTrain cars were delivered and tested after the system's guideway rails were complete by March 2001.[52] The guideways themselves, located between the rails, were completed in August 2001.[62]

Terminal 5 station interior

The Port Authority predicted that the AirTrain's opening would create 118 jobs at JFK Airport.[63] Service was originally planned to begin on the Howard Beach branch in October 2002,[44][51] followed by the Jamaica branch in 2003,[51][64] but was delayed because of several incidents during testing.[65] In July 2002, three workers were injured during an AirTrain derailment,[65] and in September 2002, a train operator died in another derailment.[66][67] The National Transportation Safety Board's investigation of the second crash found that the train had sped excessively on a curve.[68][69] As a result, the opening was postponed until June 2003,[70] and then to December 17, 2003, its eventual opening date.[71]

Southeast Queens residents feared the project could become a boondoggle,[50] as the construction cost of the system had increased to $1.9 billion.[19][72] Like other Port Authority properties, the AirTrain did not receive subsidies from the state or city for its operating costs. This was one of the reasons cited for the system's relatively high initial $5 fare, which was more than twice the subway's fare at the time of the AirTrain's opening.[73]

Exterior of the AirTrain station building at Jamaica station

Several projects were developed in anticipation of the AirTrain. By June 2003, a 50,000-square-foot (4,600 m²), 16-story building was being planned for Sutphin Boulevard across from the Jamaica station. Other nearby projects built in the preceding five years included the Jamaica Center Mall, Joseph P. Addabbo Federal Building, the Civil Court, and the Food and Drug Administration Laboratory and Offices.[74] After AirTrain JFK began operations, Jamaica saw a boom in commerce. A 15-screen movie theater opened in the area in early 2004, and developers were also planning a 13-floor building in the area.[75] A proposed hotel above the AirTrain terminal was canceled after the September 11, 2001, terrorist attacks.[75]

In 2004, the city proposed rezoning 40 blocks of Jamaica, centered around the AirTrain station, as a commercial area. The mixed-use "airport village" was to consist of 5 million square feet (460,000 m²) of space. According to the RPA, the rezoning was part of a proposal to re-envision Jamaica as a "regional center" because of the area's high usage as a transit hub. During the average weekday, 100,000 LIRR riders and 53,000 subway riders traveled to or from Jamaica. In addition, the Port Authority had estimated that the AirTrain JFK would carry 12.4 million passengers a year.[75]

Plans to extend the AirTrain to Manhattan were examined even before the system's opening.[76] Between September 2003 and April 2004, several agencies, including the MTA and the Port Authority, conducted a feasibility study of the Lower Manhattan–Jamaica/JFK Transportation Project, which would allow subway or LIRR trains to travel directly from JFK Airport to Manhattan.[77] The study examined forty alternatives,[78] but the project was halted in 2008 before an environmental impact statement could be created.[79]

On January 4, 2017, the office of New York Governor Andrew Cuomo announced a $7–10 billion plan to renovate JFK Airport.[80][81] As part of the project, the AirTrain JFK would either see lengthened trainsets or a direct track connection to the rest of New York City's transportation system, and a direct connection between the AirTrain, LIRR, and subway would be built at Jamaica station.[82] Shortly after Cuomo's announcement, the Regional Plan Association published an unrelated study for a possible direct rail link between Manhattan and JFK Airport.[83][84] Yet another study in September 2018, published by the MTA, examined alternatives for an LIRR rail link to JFK as part of a possible restoration of the abandoned Rockaway Beach Branch.[85]

In July 2017, Cuomo's office began accepting submissions for master plans to renovate the airport.[86][87] A year later, in October 2018, Cuomo released details of the project, whose cost had grown to $13 billion. The improvements included lengthening AirTrains as well as adding lanes to the Van Wyck Expressway.[88][89]

AirTrain system map

AirTrain JFK connects the airport's terminals and parking areas with the Howard Beach and Jamaica stations. It is located entirely within the New York City borough of Queens. The system consists of three routes: two connecting the terminals with either the Howard Beach or Jamaica stations, and one route looping continuously around the central terminal area.[90][91] It is operated by Bombardier under contract to the Port Authority.[63]

The Howard Beach Train route (colored green on the official map) begins and ends at the Howard Beach–JFK Airport station, where there is a direct transfer to the New York City Subway's A train.[1] It makes an additional stop at Lefferts Boulevard, where passengers can transfer to parking lot shuttle buses; the B15 bus to Brooklyn; and the limited-stop Q10 bus.[90][91] The segment from Howard Beach to Federal Circle, which is about 1.8 miles (2.9 km) long, passes over the long-term and employee parking lots.[92]

The Jamaica Station Train route (colored red on the official map) begins and ends at the Jamaica station, adjacent to the Long Island Rail Road platforms there. The Jamaica station contains a connection to the Sutphin Boulevard–Archer Avenue–JFK Airport station on the New York City Subway's E​, ​J, and ​Z trains.[1][93] The AirTrain and LIRR stations contain transfers to the subway, as well as to ground-level bus routes.[90][91] West of Jamaica, the line travels above the north side of 94th Avenue before curving southward onto the Van Wyck Expressway. The segment from Jamaica to Federal Circle is about 3.1 miles (5.0 km) long.[92]

The Howard Beach Train and Jamaica Station Train routes merge at Federal Circle for car rental companies and shuttle buses to hotels and the airport's cargo areas. South of Federal Circle, the routes share track for 1.5 miles (2.4 km) and enter a tunnel before the tracks separate in two directions for the 2-mile (3.2 km) terminal loop.[94] Both routes continue counterclockwise around the loop, stopping at Terminals 1, 2, 4, 5, 7, and 8 in that order.[91] Connections to the Q3, Q10, and B15 local buses are available at Terminal 5.[90][91] The travel time from either Jamaica or Howard Beach to the JFK terminals is about eight minutes.[95]

The Airline Terminals Train (colored gold on the official map), an airport terminal circulator, serves the terminals. It makes a continuous clockwise loop around the terminals, operating in the opposite direction to the Howard Beach Train and Jamaica Station Train routes.[90][91] The terminal-area loop is 1.8 miles (2.9 km) long.[3]

Trains to and from Jamaica and Howard Beach were originally planned to run every two minutes during peak hours, with alternate trains traveling to each branch.[96] The final environmental impact statement projected that trains in the central terminal area would run every ninety seconds.[97] By 2014 actual frequencies were much lower: each branch was served by one train every seven to 12 minutes during peak hours. Trains arrived every 10 to 15 minutes on each branch during weekdays; every 15 to 20 minutes during late nights; and every 16 minutes during weekends.[98]

Platform screen doors (shown here at Howard Beach station) are present on all AirTrain JFK platforms

All AirTrain JFK stations contain elevators and are compliant with the Americans with Disabilities Act of 1990 (ADA).[99] Each platform is 240 feet (73 m) long and can fit up to four cars.[4] The stations include air conditioning, as well as platform screen doors to protect passengers and to allow the unmanned trains to operate safely.[1][34] Each station also contains safety systems such as CCTV cameras, alarms, and emergency contact points, and is staffed by attendants.[34]

All the stations have island platforms except for Federal Circle, which has a bi-level split platform layout.[91] The Jamaica and Howard Beach stations are designed as "gateway stations" to give passengers the impression of entering the airport.[100] There are also stations at Lefferts Boulevard, as well as Terminals 1, 2, 4, 5, 7, and 8. Three former terminals, numbered 3, 6, and 9, were respectively served by the stations that are now named Terminals 2, 5, and 8.[91][101] The four stations outside the Central Terminal Area were originally designated with the letters A–D alongside their names;[101] the letters were later dropped.[99]

Except for Terminal 4, all stations in the airport are freestanding structures, and most are connected to their respective terminal buildings by an aerial walkway. Access to Terminal 2 requires passengers to use crosswalks at street level, while the Terminal 4 station is located inside the terminal building itself.[103]

View of JFK Airport's control tower from the AirTrain guideway

The AirTrain has a total route length of 8.1 miles (13.0 km).[3] The system consists of 6.3 miles (10.1 km) of single-track guideway viaducts and 3.2 miles (5.1 km) of double-track guideway viaducts.[104] AirTrain JFK is mostly elevated, though there are short segments that run underground or at ground level. The elevated sections were built with precast single and dual guideway spans, while the underground sections used cut-and-cover, and the ground-level sections used concrete ties and ballast trackbeds. The single guideway viaducts carry one track each and are 19 feet 3 inches (5.87 m) wide, while the double guideway viaducts carry two tracks each and are 31 feet 0 inches (9.45 m) wide. Columns support the precast concrete elevated sections at intervals of up to 40 feet (12 m).[4] The elevated structures use seismic isolation bearings and soundproof barriers to protect from small earthquakes as well as prevent noise pollution.[46]

The AirTrain runs on steel tracks[97] that are continuously welded across all joints except at the terminals; the guideway viaducts are also continuously joined.[105] Trains use double crossovers at the Jamaica and Howard Beach terminals in order to switch to the track going in the opposite direction. There are also crossover switches north and south of Federal Circle, counterclockwise from Terminal 8, and clockwise from Terminal 1.[5]

The tracks are set at a gauge of 4 ft 8 ¹⁄₂ in (1,435 mm).[4] This enables possible future conversion to LIRR or subway use, or a possible connection to LIRR or subway tracks for a one-trip ride into Manhattan, since these systems use the same track gauge.[44][95][106][107] AirTrain's current rolling stock, or train cars, are not able to use either LIRR or subway tracks due to the cars' inadequate structural strength and the different methods of propulsion used on each system. In particular, the linear induction motor system that propels the AirTrain vehicles is incompatible with the traction motor manual-propulsion system used by LIRR and subway rolling stock.[107] If a one-seat ride is ever implemented, a hybrid-use vehicle would be needed to operate on both subway/LIRR and AirTrain tracks.[95][107]

There are seven electrical substations. The redundancy allows trains to operate even if there are power outages at one substation.[1] Since there are no emergency exits between stations, a control tower can automatically guide the train to its next stop in case of an emergency.[51]