Azimuth

Azimuth Marker, Mount Allen (Sandstone Peak), Southern California, USA.

In land navigation, azimuth is usually denoted alpha, α, and defined as a horizontal angle measured clockwise from a north base line or meridian.[2][3] Azimuth has also been more generally defined as a horizontal angle measured clockwise from any fixed reference plane or easily established base direction line.[4][5][6]

Today, the reference plane for an azimuth is typically true north, measured as a 0° azimuth, though other angular units (grad, mil) can be used. Moving clockwise on a 360 degree circle, east has azimuth 90°, south 180°, and west 270°. There are exceptions: some navigation systems use south as the reference vector. Any direction can be the reference vector, as long as it is clearly defined.

Quite commonly, azimuths or compass bearings are stated in a system in which either north or south can be the zero, and the angle may be measured clockwise or anticlockwise from the zero. For example, a bearing might be described as "(from) south, (turn) thirty degrees (toward the) east" (the words in brackets are usually omitted), abbreviated "S30°E", which is the bearing 30 degrees in the eastward direction from south, i.e. the bearing 150 degrees clockwise from north. The reference direction, stated first, is always north or south, and the turning direction, stated last, is east or west. The directions are chosen so that the angle, stated between them, is positive, between zero and 90 degrees. If the bearing happens to be exactly in the direction of one of the cardinal points, a different notation, e.g. "due east", is used instead.

A standard Brunton Geo compass, commonly used by geologists and surveyors to measure azimuth

The cartographical azimuth (in decimal degrees) can be calculated when the coordinates of 2 points are known in a flat plane (cartographical coordinates):

${\displaystyle \alpha ={\frac {180}{\pi }}\operatorname {atan2} (X_{2}-X_{1},Y_{2}-Y_{1})}$

Remark that the reference axes are swapped relative to the (counterclockwise) mathematical polar coordinate system and that the azimuth is clockwise relative to the north. This is the reason why the X and Y axis in the above formula are swapped. If the azimuth becomes negative, one can always add 360°.

The formula in radians would be slightly easier:

${\displaystyle \alpha =\operatorname {atan2} (X_{2}-X_{1},Y_{2}-Y_{1})}$

Note the swapped ${\displaystyle (x,y)}$ in contrast to the normal ${\displaystyle (y,x)}$ atan2 input order.

The azimuth between Cape Town and Melbourne along the geodesic (the shortest route) changes from 141° to 42°. Azimuthal orthographic projection and Miller cylindrical projection.

We are standing at latitude ${\displaystyle \varphi _{1}}$, longitude zero; we want to find the azimuth from our viewpoint to Point 2 at latitude ${\displaystyle \varphi _{2}}$, longitude L (positive eastward). We can get a fair approximation by assuming the Earth is a sphere, in which case the azimuth α is given by

${\displaystyle \tan \alpha ={\frac {\sin L}{\cos \varphi _{1}\tan \varphi _{2}-\sin \varphi _{1}\cos L}}}$

A better approximation assumes the Earth is a slightly-squashed sphere (an oblate spheroid); azimuth then has at least two very slightly different meanings. Normal-section azimuth is the angle measured at our viewpoint by a theodolite whose axis is perpendicular to the surface of the spheroid; geodetic azimuth is the angle between north and the geodesic; that is, the shortest path on the surface of the spheroid from our viewpoint to Point 2. The difference is usually immeasurably small; if Point 2 is not more than 100 km away, the difference will not exceed 0.03 arc second.

Various websites will calculate geodetic azimuth; e.g., GeoScience Australia site. Formulas for calculating geodetic azimuth are linked in the distance article.

Normal-section azimuth is simpler to calculate; Bomford says Cunningham's formula is exact for any distance. If f is the flattening, and e the eccentricity, for the chosen spheroid (e.g., ​¹⁄_{298.257223563} for WGS84) then

${\displaystyle {\begin{aligned}e^{2}&=f(2-f)\\1-e^{2}&=(1-f)^{2}\\\Lambda &=\left(1-e^{2}\right){\frac {\tan \varphi _{2}}{\tan \varphi _{1}}}+e^{2}{\sqrt {\frac {1+\left(1-e^{2}\right)\left(\tan \varphi _{2}\right)^{2}}{1+\left(1-e^{2}\right)\left(\tan \varphi _{1}\right)^{2}}}}\\\tan \alpha &={\frac {\sin L}{(\Lambda -\cos L)\sin \varphi _{1}}}\end{aligned}}}$

If φ₁ = 0 then

${\displaystyle \tan \alpha ={\frac {\sin L}{\left(1-e^{2}\right)\tan \varphi _{2}}}}$

To calculate the azimuth of the sun or a star given its declination and hour angle at our location, we modify the formula for a spherical earth. Replace φ₂ with declination and longitude difference with hour angle, and change the sign (since the hour angle is positive westward instead of east).

There is a wide variety of azimuthal map projections. They all have the property that directions (the azimuths) from a central point are preserved. Some navigation systems use south as the reference plane. However, any direction can serve as the plane of reference, as long as it is clearly defined for everyone using that system.

Comparison of some azimuthal projections centred on 90° N at the same scale, ordered by projection altitude in Earth radii. (click for detail)

Used in celestial navigation, an azimuth is the direction of a celestial body from the observer.[7] In astronomy, an azimuth is sometimes referred to as a bearing. In modern astronomy azimuth is nearly always measured from the north. (The article on coordinate systems, for example, uses a convention measuring from the south.) In former times, it was common to refer to azimuth from the south, as it was then zero at the same time that the hour angle of a star was zero. This assumes, however, that the star (upper) culminates in the south, which is only true if the star's declination is less than (i.e. further south than) the observer's latitude.

For magnetic tape drives, azimuth refers to the angle between the tape head(s) and tape.

In sound localization experiments and literature, the azimuth refers to the angle the sound source makes compared to the imaginary straight line that is drawn from within the head through the area between the eyes.

An azimuth thruster in shipbuilding is a propeller that can be rotated horizontally.

"Azimuth" is the name of the ledger used to register Urbit IDs.

The word azimuth is in all European languages today. It originates from medieval Arabic al-sumūt, pronounced as-sumūt in Arabic, meaning "the directions" (plural of Arabic al-samt = "the direction"). The Arabic word entered late medieval Latin in an astronomy context and in particular in the use of the Arabic version of the astrolabe astronomy instrument. The word's first record in English is in the 1390s in Treatise on the Astrolabe by Geoffrey Chaucer. The first known record in any Western language is in Spanish in the 1270s in an astronomy book that was largely derived from Arabic sources, the Libros del saber de astronomía commissioned by King Alfonso X of Castile.[8]

• Rutstrum, Carl, The Wilderness Route Finder, University of Minnesota Press (2000), ISBN 0-8166-3661-3
• U.S. Army, Advanced Map and Aerial Photograph Reading, FM 21–26, Headquarters, War Department, Washington, D.C. (17 September 1941)
• U.S. Army, Advanced Map and Aerial Photograph Reading, FM 21–26, Headquarters, War Department, Washington, D.C. (23 December 1944)
• U.S. Army, Map Reading and Land Navigation, FM 21–26, Headquarters, Dept. of the Army, Washington, D.C. (7 May 1993)

Look up azimuth in Wiktionary, the free dictionary.

• "Azimuth" . Encyclopædia Britannica (11th ed.). 1911.
• "Azimuth" . Collier's New Encyclopedia. 1921.