Catalan solid

In mathematics, a Catalan solid, or Archimedean dual, is a dual polyhedron to an Archimedean solid. There are 13 Catalan solids. They are named for the Belgian mathematician, Eugène Catalan, who first described them in 1865.

The solids above (dark) shown together with their duals (light). The visible parts of the Catalan solids are regular pyramids.

The Catalan solids are all convex. They are face-transitive but not vertex-transitive. This is because the dual Archimedean solids are vertex-transitive and not face-transitive. Note that unlike Platonic solids and Archimedean solids, the faces of Catalan solids are not regular polygons. However, the vertex figures of Catalan solids are regular, and they have constant dihedral angles. Being face-transitive, Catalan solids are isohedra.

Additionally, two of the Catalan solids are edge-transitive: the rhombic dodecahedron and the rhombic triacontahedron. These are the duals of the two quasi-regular Archimedean solids.

Just as prisms and antiprisms are generally not considered Archimedean solids, so bipyramids and trapezohedra are generally not considered Catalan solids, despite being face-transitive.

Two of the Catalan solids are chiral: the pentagonal icositetrahedron and the pentagonal hexecontahedron, dual to the chiral snub cube and snub dodecahedron. These each come in two enantiomorphs. Not counting the enantiomorphs, bipyramids, and trapezohedra, there are a total of 13 Catalan solids.

nArchimedean solidCatalan solid
1 truncated tetrahedrontriakis tetrahedron
2 truncated cubetriakis octahedron
3 truncated cuboctahedrondisdyakis dodecahedron
4 truncated octahedrontetrakis hexahedron
5 truncated dodecahedrontriakis icosahedron
6 truncated icosidodecahedrondisdyakis triacontahedron
7 truncated icosahedronpentakis dodecahedron
8 cuboctahedronrhombic dodecahedron
9 icosidodecahedronrhombic triacontahedron
10 rhombicuboctahedrondeltoidal icositetrahedron
11 rhombicosidodecahedrondeltoidal hexecontahedron
12 snub cubepentagonal icositetrahedron
13 snub dodecahedronpentagonal hexecontahedron

Symmetry

The Catalan solids, along with their dual Archimedean solids, can be grouped in those with tetrahedral, octahedral and icosahedral symmetry. For both octahedral and icosahedral symmetry there are six forms. The only Catalan solid with genuine tetrahedral symmetry is the triakis tetrahedron (dual of the truncated tetrahedron). Rhombic dodecahedron and tetrakis hexahedron have octahedral symmetry, but they can be colored to have only tetrahedral symmetry. Rectification and snub also exist with tetrahedral symmetry, but they are Platonic instead of Archimedean, so their duals are Platonic instead of Catalan. (They are shown with brown background in the table below.)

Tetrahedral symmetry
Archimedean
(Platonic)
Catalan
(Platonic)
Octahedral symmetry
Archimedean
Catalan
Icosahedral symmetry
Archimedean
Catalan

List

Name
(Dual name)
Conway name
Pictures Orthogonal
wireframes
Face
polygon
Face angles (°) Dihedral angle (°) Faces Edges Vert Sym.
triakis tetrahedron
(truncated tetrahedron)
"kT"
Isosceles

V3.6.6
112.885
33.557
33.557
129.521 12 18 8 Td
rhombic dodecahedron
(cuboctahedron)
"jC"
Rhombus

V3.4.3.4
70.529
109.471
70.529
109.471
120 12 24 14 Oh
triakis octahedron
(truncated cube)
"kO"
Isosceles

V3.8.8
117.201
31.400
31.400
147.350 24 36 14 Oh
tetrakis hexahedron
(truncated octahedron)
"kC"
Isosceles

V4.6.6
83.621
48.190
48.190
143.130 24 36 14 Oh
deltoidal icositetrahedron
(rhombicuboctahedron)
"oC"
Kite

V3.4.4.4
81.579
81.579
81.579
115.263
138.118 24 48 26 Oh
disdyakis dodecahedron
(truncated cuboctahedron)
"mC"
Scalene

V4.6.8
87.202
55.025
37.773
155.082 48 72 26 Oh
pentagonal icositetrahedron
(snub cube)
"gC"
Pentagon

V3.3.3.3.4
114.812
114.812
114.812
114.812
80.752
136.309 24 60 38 O
rhombic triacontahedron
(icosidodecahedron)
"jD"
Rhombus

V3.5.3.5
63.435
116.565
63.435
116.565
144 30 60 32 Ih
triakis icosahedron
(truncated dodecahedron)
"kI"
Isosceles

V3.10.10
119.039
30.480
30.480
160.613 60 90 32 Ih
pentakis dodecahedron
(truncated icosahedron)
"kD"
Isosceles

V5.6.6
68.619
55.691
55.691
156.719 60 90 32 Ih
deltoidal hexecontahedron
(rhombicosidodecahedron)
"oD"
Kite

V3.4.5.4
86.974
67.783
86.974
118.269
154.121 60 120 62 Ih
disdyakis triacontahedron
(truncated icosidodecahedron)
"mD"
Scalene

V4.6.10
88.992
58.238
32.770
164.888 120 180 62 Ih
pentagonal hexecontahedron
(snub dodecahedron)
"gD"
Pentagon

V3.3.3.3.5
118.137
118.137
118.137
118.137
67.454
153.179 60 150 92 I

Geometry

All dihedral angles of a Catalan solid are equal. Denoting their value by , and denoting the face angle at the vertices where faces meet by , we have

.

This can be used to compute and , , ... , from , ... only.

Triangular faces

Of the 13 Catalan solids, 7 have triangular faces. These are of the form Vp.q.r, where p, q and r take their values among 3, 4, 5, 6, 8 and 10. The angles , and can be computed in the following way. Put , , and put

.

Then

,
.

For and the expressions are similar of course. The dihedral angle can be computed from

.

Applying this, for example, to the disdyakis triacontahedron (, and , hence , and , where is the golden ratio) gives and .

Quadrilateral faces

Of the 13 Catalan solids, 4 have quadrilateral faces. These are of the form Vp.q.p.r, where p, q and r take their values among 3, 4, and 5. The angle can be computed by the following formula:

.

From this, , and the dihedral angle can be easily computed. Alternatively, put , , . Then and can be found by applying the formulas for the triangular case. The angle can be computed similarly of course. The faces are kites, or, if , rhombi. Applying this, for example, to the deltoidal icositetrahedron (, and ), we get .

Pentagonal faces

Of the 13 Catalan solids, 2 have pentagonal faces. These are of the form Vp.p.p.p.q, where p=3, and q=4 or 5. The angle can be computed by solving a degree three equation:

.

Metric properties

For a Catalan solid let be the dual with respect to the midsphere of . Then is an Archimedean solid with the same midsphere. Denote the length of the edges of by . Let be the inradius of the faces of , the midradius of and , the inradius of , and the circumradius of . Then these quantities can be expressed in and the dihedral angle as follows:

,
,
,
.

These quantities are related by , and .

As an example, let be a cuboctahedron with edge length . Then is a rhombic dodecahedron. Applying the formula for quadrilateral faces with and gives , hence , , , .

All vertices of of type lie on a sphere with radius given by

,

and similarly for .

Dually, there is a sphere which touches all faces of which are regular -gons (and similarly for ) in their center. The radius of this sphere is given by

.

These two radii are related by . Continuing the above example: and , which gives , , and .

If is a vertex of of type , an edge of starting at , and the point where the edge touches the midsphere of , denote the distance by . Then the edges of joining vertices of type and type have length . These quantities can be computed by

,

and similarly for . Continuing the above example: , , , , so the edges of the rhombic dodecahedron have length .

The dihedral angles between -gonal and -gonal faces of satisfy

.

Finishing the rhombic dodecahedron example, the dihedral angle of the cuboctahedron is given by .

Application to other solids

All of the formulae of this section apply to the Platonic solids, and bipyramids and trapezohedra with equal dihedral angles as well, because they can be derived from the constant dihedral angle property only. For the pentagonal trapezohedron, for example, with faces V3.3.5.3, we get , or . This is not surprising: it is possible to cut off both apexes in such a way as to obtain a regular dodecahedron.

See also

References

  • Eugène Catalan Mémoire sur la Théorie des Polyèdres. J. l'École Polytechnique (Paris) 41, 1-71, 1865.
  • Alan Holden Shapes, Space, and Symmetry. New York: Dover, 1991.
  • Wenninger, Magnus (1983), Dual Models, Cambridge University Press, ISBN 978-0-521-54325-5, MR 0730208 (The thirteen semiregular convex polyhedra and their duals)
  • Williams, Robert (1979). The Geometrical Foundation of Natural Structure: A Source Book of Design. Dover Publications, Inc. ISBN 0-486-23729-X. (Section 3-9)
  • Anthony Pugh (1976). Polyhedra: A visual approach. California: University of California Press Berkeley. ISBN 0-520-03056-7. Chapter 4: Duals of the Archimedean polyhedra, prisma and antiprisms
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.