Finishing (textiles)

In order to impart the required functional properties to the fiber or fabric, it is customary to subject the material to different types of physical and chemical treatments. For example, wash and wear finish for a cotton fabric is necessary to make it crease-free or wrinkle-free. In a similar way, mercerising, singeing, flame retardant, water repellent, waterproof, anti-static and peach finishing achieve various fabric properties desired by consumers.

The use of 100% synthetic textiles has increased considerably since the development of textured yarns made of filaments and the growing production of knit goods. The use of open weave has enabled the production of lighter, breathable, fabrics to ensure better wearing comfort.

The properties of petroleum-based synthetic fibers, most important among them being polyamide, polyester and polyacrylonitrile, are essentially different from those of natural cellulosic and protein/ wool fibers. Hence the sequence of finishing operations is likely to be different. While cellulosic fabrics require a resin finishing treatment to impart easy-care properties, synthetic fibers already exhibit these easy-care criteria and require only a heat setting operation.

• Bio-polishing removes the protruding fibers of fabric with the action of an enzyme. Enzymes, such as cellulase for cotton, selectively remove protruding fibers. These enzymes may be deactivated by an increase in temperature and shifting pH.
• Mercerisation makes the woven cotton fabric stronger, more lustrous, better dye affinity, and less abrasive.
• Raising lifts the surface fibers to improve the softness and warmth, as in flannelette.
• Peach Finish subjects the fabric (either cotton or its synthetic blends) to emery wheels, making the surface velvet-like. This is a special finish used mostly in garments.
• Fulling or waulking was a method of thickening woolen material to make it more water-resistant.
• Decatising to bring dimension stability to woollen fabrics.
• Calendering makes one or both surfaces of the fabric smooth and shiny. The fabric is passed to through hot, fast-moving stainless steel cylinders.
• Compacting it is the advance version of the calendering machine and suitable for knitted fabric to achieve desired gsm and to set width, for calendering and shrinkages control simultaneously. The compactors machines comes in both tube and open width settings.[15]
• Sanforizing or Pre-shrinking prevents a fabric and the produced garment from shrinking after production. This is also a mechanical finish, acquired by feeding the fabric between a roller and rubber blanket, in such a way the rubber blanket compresses the weft threads and imparts compressive shrinkage.
• Crease-Resist finish or "wash-and-wear" or "wrinkle-free" finishes are achieved by the addition of a chemical resin finish that makes the fiber take on a quality similar to that of synthetic fibers.
• Anti-microbial finish causes the fabric to inhibit the growth of microbes. The humid and warm environment found in textile fibers encourages the growth of the microbes. Infestation by microbes can cause cross-infection by pathogens and the development of odor where the fabric is worn next to the skin. In addition, stains and loss of fiber quality of textile substrates can also take place. With an aim to protect the skin of the wearer and the textile substrate itself, an anti-microbial finish is applied to textile materials.
• Antiviral finishes on textiles are a further exploitation of using antimicrobial surfaces that are applicable to both natural and synthetic textiles. Exhibiting antiviral properties, these surfaces may inactivate the lipid coated viruses.[16]
• Self cleaning surface finish on cellulosic materials like cotton, treated materials clean themselves of stains and remove odors when exposed to sunlight. The fabric is coated with N-TiO2 film and lAgI particles.[17][18]

• Heat-setting of synthetic fabrics eliminates the internal tensions within the fiber, generated during manufacturing, and the new state can be fixed by rapid cooling. This heat setting fixes the fabrics in the relaxed state, and thus avoids subsequent shrinkage or creasing of the fabric. Presetting of goods makes it possible to use higher temperatures for setting without considering the sublimation properties of dyes and also has a favorable effect on dyeing behavior and the running properties of the fabric. On the other hand, post-setting can be combined with some other operations such as Thermasol dyeing or optical brightening of polyester. Post-setting as a final finish is useful to achieve high dimensional stability, along with the desired handle. Post heat setting may cause poor wash fastness in disperse dyed fabrics because of sublimation. Heat-setting is an important part of finishing synthetic or blended fabrics.
• Stiffening and filling process: A stiffening effect is desirable in certain polyamides and polyester materials (e.g. petticoats, collar inner linings), which can be done by reducing the mutual independence of structural elements of fabric by polymer deposition on coating as a fine film.
• Hydrophilic finishes compensate for lower moisture and water absorption capacity in synthetic fiber materials, which become uncomfortable in contact with skin. Certain products, based on modified (oxy-ethylated) polyamides, make the fabric more pleasant by reducing the cohesion of water so that it spreads over a larger area and thus evaporates more readily.
• Anti-pilling finish alleviates pilling, an unpleasant phenomenon associated with spun yarn fabrics, especially when they contain synthetics. Synthetic fibers are more readily brought to the surface of fabric due to their smooth surface and circular cross-section, and due to their higher tensile strength and abrasion resistance. With knit "picking" also occurs: by abrasion, individual fibers work themselves out of yarn loops onto the surface, and the garment catches on a pointed or rough object. Knitting is susceptible to these effects due to the open weave and bulky yarn.
• Anti-static finish prevents dust from clinging to the fabric. Anti-static effective chemicals are largely chemically inert and require Thermasol or heat treatment for fixing on polyester fabrics. Polyether agents have been found to be useful but should not affect the dye-equilibrium on fiber, lest they impair the rubbing fastness. In general, Thermasol anti-static agents also have a good soil release action, which is as permanent as the anti-static effect. Anti-static finishes may also be of polyamide type, being curable at moderate temperatures.
• Non-slip finishes give the filaments a rougher surface. Synthetic warp and weft threads in loosely woven fabrics are particularly prone to slip because of their surface smoothness when the structure of the fabric is disturbed and appearance is no longer attractive. Silica gel dispersions or silicic acid colloidal solutions are used in combination with latex polymer or acrylates dispersions to get a more permanent effect, along with simultaneous improvement in resistance to pilling or snagging. These polymer finishes are also capable of imparting a soft and smooth handle to synthetic fabric without making it water repellent.
• Fire Resistant or Flame Retardant finish: to reduce flammability.
• Anti-microbial finish: with the increasing use of synthetic fibers for carpets and other materials in public places, anti-microbial finishes have gained importance. Products that are commonly applied are brominated phenols, quaternary ammonium compounds, organo-silver, and tin compounds, which can be applied as solutions or dispersions. They can also be incorporated in a polymeric film deposited on the surface to achieve a controlled release.

• Wet processing engineering
• Textile manufacturing

• Collier, Ann M (1970), A Handbook of Textiles, Pergamon Press, p. 258, ISBN 0-08-018057-4
• Kadolph, Sara J (2007). Textiles (10 ed.). Pearson/Prentice-Hall. ISBN 978-0-13-118769-6.
• Textil-Praxis (1958), 401 - „Befeuchtung oder Dämpfen von Wollgarnen”
• Textilbetrieb (1981), 29 - „Gleichmäßige Effekte beim Garndämpfen“
• Dr. H.-J. Henning, Dr.-Ing. Cl. Sustmann - Melliand Textilberichte „Untersuchungen über das Vakuumdämpfen von Wollgarnen“ (1966), 530
• Jens Holm Dittrich, Paul Naefe, Johann Kreitz - Melliand Textilberichte „Verfahren zur Drallberuhigung von Wollgarnen durch Kurzzeitdämpfen“ (1986), 817