Isotope analysis

Archaeological materials, such as bone, organic residues, hair, or sea shells, can serve as substrates for isotopic analysis. Carbon, nitrogen and zinc isotope ratios are used to investigate the diets of past people; These isotopic systems can be used with others, such as strontium or oxygen, to answer questions about population movements and cultural interactions, such as trade.[1]

Carbon isotopes are analysed in archaeology to determine the source of carbon at the base of the foodchain. Examining the ¹²C/¹³C isotope ratio, it is possible to determine whether animals and humans ate predominantly C3 or C4 plants.[2] Potential C3 food sources include wheat, rice, tubers, fruits, nuts and many vegetables, while C4 food sources include millet and sugar cane.[3] Carbon isotope ratios can also be used to distinguish between marine, freshwater, and terrestrial food sources.[4][5]

Carbon isotope ratios can be measured in bone collagen or bone mineral (hydroxylapatite), and each of these fractions of bone can be analysed to shed light on different components of diet. The carbon in bone collagen is predominantly sourced from dietary protein, while the carbon found in bone mineral is sourced from all consumed dietary carbon, included carbohydrates, lipids, and protein.[6]

To obtain an accurate picture of palaeodiets, it is important to understand processes of diagenesis that may affect the original isotopic signal. It is also important for the researcher to know the variations of isotopes within individuals, between individuals, and over time.[1]

Isotope analysis has been particularly useful in archaeology as a means of characterization. Characterization of artifacts involves determining the isotopic composition of possible source materials such as metal ore bodies and comparing these data to the isotopic composition of analyzed artifacts. A wide range of archaeological materials such as metals, glass and lead-based pigments have been sourced using isotopic characterization.[7] Particularly in the Bronze Age Mediterranean, lead isotope analysis has been a useful tool for determining the sources of metals and an important indicator of trade patterns. Interpretation of lead isotope data is, however, often contentious and faces numerous instrumental and methodological challenges.[8] Problems such as the mixing and re-using of metals from different sources, limited reliable data and contamination of samples can be difficult problems in interpretation.

All biologically active elements exist in a number of different isotopic forms, of which two or more are stable. For example, most carbon is present as ¹²C, with approximately 1% being ¹³C. The ratio of the two isotopes may be altered by biological and geophysical processes, and these differences can be utilized in a number of ways by ecologists. The main elements used in isotope ecology are carbon, nitrogen, oxygen, hydrogen and sulfur, but also include silicon, iron, and strontium.[9]

Stable isotopes have become a popular method for understanding aquatic ecosystems because they can help scientists in understanding source links and process information in marine food webs. These analyses can also be used to a certain degree in terrestrial systems. Certain isotopes can signify distinct primary producers forming the bases of food webs and trophic level positioning. The stable isotope compositions are expressed in terms of delta values (δ) in permil (‰), i.e. parts per thousand differences from a standard. They express the proportion of an isotope that is in a sample. The values are expressed as:

δX = [(R_sample / R_standard) – 1] × 10³

where X represents the isotope of interest (e.g., ¹³C) and R represents the ratio of the isotope of interest and its natural form (e.g., ¹³C/¹²C).[10] Higher (or less negative) delta values indicate increases in a sample's isotope of interest, relative to the standard, and lower (or more negative) values indicate decreases. The standard reference materials for carbon, nitrogen, and sulfur are Pee Dee Belamnite limestone, nitrogen gas in the atmosphere, and Cañon Diablo meteorite respectively. Analysis is usually done using a mass spectrometer, detecting small differences between gaseous elements. Analysis of a sample can cost anywhere from $30 to $100.[10] Stable isotopes assist scientists in analyzing animal diets and food webs by examining the animal tissues that bear a fixed isotopic enrichment or depletion vs. the diet. Muscle or protein fractions have become the most common animal tissue used to examine the isotopes because they represent the assimilated nutrients in their diet. The main advantage to using stable isotope analysis as opposed to stomach content observations is that no matter what the status is of the animal's stomach (empty or not), the isotope tracers in the tissues will give us an understanding of its trophic position and food source.[11] The three major isotopes used in aquatic ecosystem food web analysis are ¹³C, ¹⁵N and ³⁴S. While all three indicate information on trophic dynamics, it is common to perform analysis on at least two of the previously mentioned 3 isotopes for better understanding of marine trophic interactions and for stronger results.

Carbon isotopes aid us in determining the primary production source responsible for the energy flow in an ecosystem. The transfer of ¹³C through trophic levels remains relatively the same, except for a small increase (an enrichment < 1 ‰). Large differences of δ¹³C between animals indicate that they have different food sources or that their food webs are based on different primary producers (i.e. different species of phytoplankton, marsh grasses.) Because δ¹³C indicates the original source of primary producers, the isotopes can also help us determine shifts in diets, both short term, long term or permanent. These shifts may even correlate to seasonal changes, reflecting phytoplankton abundance.[11] Scientists have found that there can be wide ranges of δ¹³C values in phytoplankton populations over a geographic region. While it is not quite certain as to why this may be, there are several hypotheses for this occurrence. These include isotopes within dissolved inorganic carbon pools (DIC) may vary with temperature and location and that growth rates of phytoplankton may affect their uptake of the isotopes. δ¹³C has been used in determining migration of juvenile animals from sheltered inshore areas to offshore locations by examining the changes in their diets. A study by Fry (1983) studied the isotopic compositions in juvenile shrimp of south Texas grass flats. Fry found that at the beginning of the study the shrimp had isotopic values of δ¹³C = -11 to -14‰ and 6-8‰ for δ¹⁵N and δ³⁴S. As the shrimp matured and migrated offshore, the isotopic values changed to those resembling offshore organisms (δ¹³C= -15‰ and δ¹⁵N = 11.5‰ and δ³⁴S = 16‰).[12]

While there is no enrichment of ³⁴S between trophic levels, the stable isotope can be useful in distinguishing benthic vs. pelagic producers and marsh vs. phytoplankton producers.[11] Similar to ¹³C, it can also help distinguish between different phytoplankton as the key primary producers in food webs. The differences between seawater sulfates and sulfides (c. 21‰ vs -10‰) aid scientists in the discriminations. Sulfur tends to be more plentiful in less aerobic areas, such as benthic systems and marsh plants, than the pelagic and more aerobic systems. Thus, in the benthic systems, there are smaller δ³⁴S values.[11]

Nitrogen isotopes indicate the trophic level position of organisms (reflective of the time the tissue samples were taken). There is a larger enrichment component with δ¹⁵N because its retention is higher than that of ¹⁴N. This can be seen by analyzing the waste of organisms.[11] Cattle urine has shown that there is a depletion of ¹⁵N relative to the diet.[13] As organisms eat each other, the ¹⁵N isotopes are transferred to the predators. Thus, organisms higher in the trophic pyramid have accumulated higher levels of ¹⁵N ( and higher δ¹⁵N values) relative to their prey and others before them in the food web. Numerous studies on marine ecosystems have shown that on average there is a 3.2‰ enrichment of ¹⁵N vs. diet between different trophic level species in ecosystems.[11] In the Baltic sea, Hansson et al. (1997) found that when analyzing a variety of creatures (such as particulate organic matter (phytoplankton), zooplankton, mysids, sprat, smelt and herring,) there was an apparent fractionation of 2.4‰ between consumers and their apparent prey.[14]

In addition to trophic positioning of organisms, δ¹⁵N values have become commonly used in distinguishing between land derived and natural sources of nutrients. As water travels from septic tanks to aquifers, the nitrogen rich water is delivered into coastal areas. Waste-water nitrate has higher concentrations of ¹⁵N than the nitrate that is found in natural soils in near shore zones.[15] For bacteria, it is more convenient for them to uptake ¹⁴N as opposed to ¹⁵N because it is a lighter element and easier to metabolize. Thus, due to bacteria's preference when performing biogeochemical processes such as denitrification and volatilization of ammonia, ¹⁴N is removed from the water at a faster rate than ¹⁵N, resulting in more ¹⁵N entering the aquifer. ¹⁵N is roughly 10-20‰ as opposed to the natural ¹⁵N values of 2-8‰.[15] The inorganic nitrogen that is emitted from septic tanks and other human-derived sewage is usually in the form of ${\displaystyle {\ce {NH4+}}}$. Once the nitrogen enters the estuaries via groundwater, it is thought that because there is more ¹⁵N entering, that there will also be more ¹⁵N in the inorganic nitrogen pool delivered and that it is picked up more by producers taking up N. Even though ¹⁴N is easier to take up, because there is much more ¹⁵N, there will still be higher amounts assimilated than normal. These levels of δ¹⁵N can be examined in creatures that live in the area and are non migratory (such as macrophytes, clams and even some fish).[14][16][17] This method of identifying high levels of nitrogen input is becoming a more and more popular method in attempting to monitor nutrient input into estuaries and coastal ecosystems. Environmental managers have become more and more concerned about measuring anthropogenic nutrient inputs into estuaries because excess in nutrients can lead to eutrophication and hypoxic events, eliminating organisms from an area entirely.[18]

Analysis of the ratio of ¹⁸O to ¹⁶O in the shells of the Colorado Delta clam was used to assess the historical extent of the estuary in the Colorado River Delta prior to construction of upstream dams.[19]

The ratio of ²H, also known as deuterium, to ¹H has been studied in both plant and animal tissue. Hydrogen isotopes in plant tissue are correlated with local water values but vary based on fractionation during photosynthesis, transpiration, and other processes in the formation of cellulose. A study on the isotope ratios of tissues from plants growing within a small area in Texas found tissues from CAM plants were enriched in deuterium relative to C4 plants.[20] Hydrogen isotope ratios in animal tissue reflect diet, including drinking water, and have been used to study bird migration[21] and aquatic food webs.[22][23]

A recent development in forensic science is the isotopic analysis of hair strands. Hair has a recognisable growth rate of 9-11mm[24] per month or 15 cm per year.[25] Human hair growth is primarily a function of diet, especially drinking water intake. The stable isotopic ratios of drinking water are a function of location, and the geology that the water percolates through. ⁸⁷Sr, ⁸⁸Sr and oxygen isotope variations are different all over the world. These differences in isotopic ratio are then biologically 'set' in our hair as it grows and it has therefore become possible to identify recent geographic histories by the analysis of hair strands. For example, it could be possible to identify whether a terrorist suspect had recently been to a particular location from hair analysis. This hair analysis is a non-invasive method which is becoming very popular in cases that DNA or other traditional means are bringing no answers.

Isotope analysis can be used by forensic investigators to determine whether two or more samples of explosives are of a common origin. Most high explosives contain carbon, hydrogen, nitrogen and oxygen atoms and thus comparing their relative abundances of isotopes can reveal the existence of a common origin. Researchers have also shown that analysis of the ¹²C/¹³C ratios can locate the country of origin for a given explosive.

Stable isotopic analysis has also been used in the identification of drug trafficking routes. Isotopic abundances are different in morphine grown from poppies in south-east Asia versus poppies grown in south-west Asia. The same is applied to cocaine that is derived from Bolivia and that from Colombia.[26]

Stable isotopic analysis has also been used for tracing the geographical origin of food[27] and timber.[28]

In isotope hydrology, stable isotopes of water (²H and ¹⁸O) are used to estimate the source, age, and flow paths of water flowing through ecosystems. The main effects that change the stable isotope composition of water are evaporation and condensation.[29] Variability in water isotopes is used to study sources of water to streams and rivers, evaporation rates, groundwater recharge, and other hydrological processes.[30][31]

The ratio of ¹⁸O to ¹⁶O in ice and deep sea cores is temperature dependent, and can be used as a proxy measure for reconstructing climate change. During colder periods of the Earth's history (glacials) such as during the ice ages, ¹⁶O is preferentially evaporated from the colder oceans, leaving the slightly heavier and more sluggish ¹⁸O behind. Organisms such as foraminifera which combine oxygen dissolved in the surrounding water with carbon and calcium to build their shells therefore incorporate the temperature-dependent ¹⁸O to ¹⁶O ratio. When these organisms die, they settle out on the sea bed, preserving a long and invaluable record of global climate change through much of the Quaternary.[32] Similarly, ice cores on land are enriched in the heavier ¹⁸O relative to ¹⁶O during warmer climatic phases (interglacials) as more energy is available for the evaporation of the heavier ¹⁸O isotope. The oxygen isotope record preserved in the ice cores is therefore a "mirror" of the record contained in ocean sediments.

Oxygen isotopes preserve a record of the effects of the Milankovitch cycles on climate change during the Quaternary, revealing an approximately 100,000-year cyclicity in the Earth's climate.