List of International Organization for Standardization standards, 9000-9999

This is a list of published[Note 1] International Organization for Standardization (ISO) standards and other deliverables.[Note 2] For a complete and up-to-date list of all the ISO standards, see the ISO catalogue.[1]

The standards are protected by copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC1) have been made freely and publicly available.[2]

ISO 9000 – ISO 9999
  • ISO 9000:2015 Quality management systems – Fundamentals and vocabulary
  • ISO 9001:2015 Quality management systems – Requirements
  • ISO/TS 9002:2016 Quality management systems – Guidelines for the application of ISO 9001:2015
  • ISO 9004:2009 Managing for the sustained success of an organization – A quality management approach
  • ISO/TR 9007:1987 Information processing systems - Concepts and terminology for the conceptual schema and the information base
  • ISO 9019:1995 Securities – Numbering of certificates
  • ISO 9022 Optics and optical instruments - Environmental test methods
    • ISO 9022-1:2016 Definitions, extent of testing
    • ISO 9022-2:2015 Cold, heat and humidity
    • ISO 9022-3:2015 Mechanical stress
    • ISO 9022-4:2014 Salt mist
    • ISO 9022-5:1994 Combined cold, low air pressure [Withdrawn: replaced by ISO 9022-23:2016]
    • ISO 9022-6:2015 Dust
    • ISO 9022-23:2016 Low pressure combined with cold, ambient temperature and dry or damp heat
  • ISO 9031:1987 Air cargo equipment - Handling systems for unit load devices (ULDs) - Symbols for pictorial representation
  • ISO 9036:1987 Information processing - Arabic 7-bit coded character set for information interchange
  • ISO/IEC 9040:1997 Information technology – Open Systems Interconnection – Virtual Terminal Basic Class Service
  • ISO/IEC 9041 Information technology – Open Systems Interconnection – Virtual Terminal Basic Class Protocol
    • ISO/IEC 9041-1:1997 Part 1: Specification
    • ISO/IEC 9041-2:1997 Part 2: Protocol Implementation Conformance Statement (PICS) proforma
  • ISO 9045:1990 Industrial screens and screening – Vocabulary
  • ISO 9050 Glass in building – Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
  • ISO 9060: Solar energy -- Specification and classification of instruments for measuring hemispherical solar and direct solar radiation
  • ISO/IEC 9066 Information technology – Open Systems Interconnection – Reliable Transfer[Note 3]
    • ISO/IEC 9066-1:1989 Part 1: Model and service definition
    • ISO/IEC 9066-2:1989 Part 2: Protocol specification
    • ISO/IEC 9066-3:1996 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO 9069:1988 Information processing – SGML support facilities – SGML Document Interchange Format (SDIF)
  • ISO/IEC 9070:1991 Information technology - SGML support facilities - Registration procedures for public text owner identifiers
  • ISO/IEC 9072 Information technology – Open Systems Interconnection – Remote Operations[Note 3]
    • ISO/IEC 9072-1:1989 Part 1: Model, notation and service definition
    • ISO/IEC 9072-2:1989 Part 2: Protocol specification
    • ISO/IEC 9072-3:1996 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO/IEC 9075 Information technology – Database languages – SQL
  • ISO 9086 Wood – Methods of physical and mechanical testing – Vocabulary
    • ISO 9086-1:1987 Part 1: General concepts and macrostructure
  • ISO 9092:2011 Textiles – Nonwovens – Definition
  • ISO 9095:1990 Steel tubes – Continuous character marking and colour coding for material identification
  • ISO 9123:2001 Measurement of liquid flow in open channels – Stage-fall-discharge relationships
  • ISO/IEC 9126 Software engineering – Product quality
  • ISO 9128:2006 Road vehicles - Graphical symbols to designate brake fluid types
  • ISO 9141 Road vehicles – Diagnostic systems[Note 3]
    • ISO 9141-2 CARB requirements for interchange of digital information
    • ISO 9141-3 Verification of the communication between vehicle and OBD II scan tool
  • ISO 9144:1991 Securities – Optical character recognition line – Position and structure
  • ISO 9160:1988 Information processing - Data encipherment - Physical layer interoperability requirements
  • ISO 9170 Terminal units for medical gas pipeline systems
    • ISO 9170-1:2017 Part 1: Terminal units for use with compressed medical gases and vacuum
    • ISO 9170-2:2008 Part 2: Terminal units for anaesthetic gas scavenging systems
  • ISO/IEC 9171 Information technology - 130 mm optical disk cartridge, write once, for information interchange
    • ISO/IEC 9171-1:1990 Part 1: Unrecorded optical disk cartridge
    • ISO/IEC 9171-2:1990 Part 2: Recording format
  • ISO 9175 Tubular tips for hand-held technical pens using India ink on tracing paper
    • ISO 9175-1:1988 Part 1: Definitions, dimensions, designation and marking
  • ISO 9177 Mechanical pencils for technical drawings[Note 3]
    • ISO 9177-1:2016 Part 1: Classification, dimensions, performance requirements and testing
    • ISO 9177-2:1989 Part 2: Black leads – Classification and dimensions
    • ISO 9177-3:1994 Part 3: Black leads – Bending strengths of HB leads
  • ISO 9180:1988 Black leads for wood-cased pencils – Classification and diameters
  • ISO 9186 Graphical symbols - Test methods
    • ISO 9186-1:2014 Part 1: Method for testing comprehensibility
    • ISO 9186-2:2008 Part 2: Method for testing perceptual quality
    • ISO 9186-3:2014 Part 3: Method for testing symbol referent association
  • ISO 9187 Injection equipment for medical use
    • ISO 9187-1:2010 Part 1: Ampoules for injectables
    • ISO 9187-2:2010 Part 2: One-point-cut (OPC) ampoules
  • ISO 9195:1992 Liquid flow measurement in open channels – Sampling and analysis of gravel-bed material
  • ISO 9196:1992 Liquid flow measurement in open channels – Flow measurements under ice conditions
  • ISO 9211 Optics and photonics - Optical coatings
    • ISO 9211-1:2010 Part 1: Definitions
  • ISO/TR 9212:2015 Hydrometry – Methods of measurement of bedload discharge
  • ISO 9222 Technical drawings – Seals for dynamic application
    • ISO 9222-1:1989 Part 1: General simplified representation
    • ISO 9222-2:1989 Part 2: Detailed simplified representation
  • ISO 9223 Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation
  • ISO 9224 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories
  • ISO 9225 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres
  • ISO 9226 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity
  • ISO 9227:2017 Corrosion tests in artificial atmospheres – Salt spray tests
  • ISO 9229:2007 Thermal insulation - Vocabulary
  • ISO 9230:2007 Information and documentation - Determination of price indexes for print and electronic media purchased by libraries
  • ISO 9232:2003 Yogurt – Identification of characteristic microorganisms (Lactobacillus delbrueckii subsp. bulgaricus and Streptococcus thermophilus)
  • ISO 9235:2013 Aromatic natural raw materials – Vocabulary
  • ISO 9241 Ergonomics of human-system interaction
  • ISO 9244:2008 Earth-moving machinery - Machine safety labels - General principles
  • ISO 9245:1991 Earth-moving machinery – Machine productivity – Vocabulary, symbols and units
  • ISO 9247:1990 Earth-moving machinery – Electrical wires and cables – Principles of identification and marking
  • ISO/TS 9250 Earth-moving machinery – Multilingual listing of equivalent terms
    • ISO/TS 9250-1:2012 Part 1: General
    • ISO/TS 9250-2:2012 Part 2: Performance and dimensions
  • ISO 9251:1987 Thermal insulation - Heat transfer conditions and properties of materials - Vocabulary
  • ISO 9264:1988 Woodworking machines – Narrow belt sanding machines with sliding table or frame – Nomenclature
  • ISO 9265:1988 Woodworking machines – Multi-spindle boring machines – Nomenclature
  • ISO 9266:1988 Woodworking machines – Universal tool and cutter sharpeners – Nomenclature
  • ISO 9267:1988 Woodworking machines – Bandsaw blade sharpening machines – Nomenclature
  • ISO 9268:1988 Implants for surgery – Metal bone screws with conical under-surface of head – Dimensions
  • ISO 9269:1988 Implants for surgery – Metal bone plates – Holes and slots corresponding to screws with conical under-surface
  • ISO/IEC 9281 Information technology - Picture coding methods
    • ISO/IEC 9281-1:1990 Part 1: Identification
    • ISO/IEC 9281-2:1990 Part 2: Procedure for registration
  • ISO/IEC 9282 Information processing - Coded representation of pictures
    • ISO/IEC 9282-1:1988 Part 1: Encoding principles for picture representation in a 7-bit or 8-bit environment
  • ISO 9288:1989 Thermal insulation – Heat transfer by radiation – Physical quantities and definitions
  • ISO/IEC 9293:1994 Information technology – Volume and file structure of disk cartridges for information interchange
  • ISO 9295:2015 Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment
  • ISO 9296:2017 Acoustics - Declared noise emission values of information technology and telecommunications equipment
  • ISO 9300:2005 Measurement of gas flow by means of critical flow Venturi nozzles
  • ISO 9308 Water quality – Enumeration of Escherichia coli and coliform bacteria[Note 3]
    • ISO 9308-1:2014 Part 1: Membrane filtration method for waters with low bacterial background flora
    • ISO 9308-2:2012 Part 2: Most probable number method
    • ISO 9308-3:1998 Part 3: Miniaturized method (Most Probable Number) for the detection and enumeration of E. coli in surface and waste water
  • ISO 9314 Information processing systems Fibre Distributed Data Interface (FDDI)
    • ISO 9314-1:1989 Part 1: Token Ring Physical Layer Protocol (PHY)
    • ISO 9314-2:1989 Part 2: Token Ring Media Access Control (MAC)
    • ISO/IEC 9314-3:1990 Part 3: Physical Layer Medium Dependent (PMD)
    • ISO/IEC 9314-4:1999 Part 4: Single Mode Fibre Physical Layer Medium Dependent (SMF-PMD)
    • ISO/IEC 9314-5:1995 Part 5: Hybrid Ring Control (HRC)
    • ISO/IEC 9314-6:1998 Part 6: Station Management (SMT)
    • ISO/IEC 9314-7:1998 Part 7: Physical layer Protocol (PHY-2)
    • ISO/IEC 9314-8:1998 Part 8: Media Access Control-2 (MAC-2)
    • ISO/IEC 9314-9:2000 Part 9: Low-cost fibre physical layer medium dependent (LCF-PMD)
    • ISO/IEC 9314-13:1998 Part 13: Conformance Test Protocol Implementation Conformance Statement (CT-PICS) Proforma
    • ISO/IEC 9314-20:2001 Part 20: Abstract test suite for FDDI physical medium dependent conformance testing (FDDI PMD ATS)
    • ISO/IEC 9314-21:2000 Part 21: Abstract test suite for FDDI physical layer protocol conformance testing (FDDI PHY ATS)
    • ISO/IEC 9314-25:1998 Part 25: Abstract test suite for FDDI - Station Management Conformance Testing (SMT-ATS)
    • ISO/IEC 9314-26:2001 Part 26: Media Access Control Conformance Testing (MAC-ATS)
  • ISO 9315:1989 Information processing systems - Interface between flexible disk cartridge drives and their host controllers
  • ISO/IEC 9316:1995 Information technology - Small Computer System Interface-2
    • ISO/IEC 9316-2:2000 Information technology - Small computer system interface-2 (SCSI-2) - Part 2: Common Access Method (CAM) Transport and SCSI interface module
  • ISO/IEC 9318 Information technology - Intelligent Peripheral Interface
    • ISO/IEC 9318-2:1990 Part 2: Device specific command set for magnetic disk drives
    • ISO/IEC 9318-3:1990 Part 3: Device generic command set for magnetic and optical disk drives
    • ISO/IEC 9318-4:2002 Part 4: Device generic command set for magnetic tape drives (IPI-3 tape)
  • ISO 9334:2012 Optics and photonics - Optical transfer function - Definitions and mathematical relationships
  • ISO 9335:2012 Optics and photonics - Optical transfer function - Principles and procedures of measurement
  • ISO 9342 Optics and optical instruments – Test lenses for calibration of focimeters
    • ISO 9342-1:2005 Part 1: Test lenses for focimeters used for measuring spectacle lenses
    • ISO 9342-2:2005 Part 2: Test lenses for focimeters used for measuring contact lenses
  • ISO 9346:2007 Hygrothermal performance of buildings and building materials – Physical quantities for mass transfer – Vocabulary
  • ISO 9360 Anaesthetic and respiratory equipment – Heat and moisture exchangers (HMEs) for humidifying respired gases in humans
    • ISO 9360-1:2000 Part 1: HMEs for use with minimum tidal volumes of 250 ml
    • ISO 9360-2:2001 Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml
  • ISO 9362:2014 Banking – Banking telecommunication messages – Business identifier code (BIC)
  • ISO 9368 Measurement of liquid flow in closed conduits by the weighing method – Procedures for checking installations
    • ISO 9368-1:1990 Part 1: Static weighing systems
  • ISO 9394:2012 Ophthalmic optics – Contact lenses and contact lens care products – Determination of biocompatibility by ocular study with rabbit eyes
  • ISO 9407 Shoe sizes – Mondopoint system of sizing and marking
  • ISO 9431:1990 Construction drawings – Spaces for drawing and for text, and title blocks on drawing sheets
  • ISO/TR 9464:2008 Guidelines for the use of ISO 5167:2003
  • ISO 9488:1999 Solar energy - Vocabulary
  • ISO 9493:2010 Geometrical product specifications (GPS) – Dimensional measuring equipment: Dial test indicators (lever type) – Design and metrological characteristics
  • ISO/IEC 9496:2003 CHILL - The ITU-T programming language
  • ISO 9506 Industrial automation systems - Manufacturing Message Specification
  • ISO/IEC 9529 Information processing systems - Data interchange on 90 mm (3,5 in) flexible disk cartridges using modified frequency modulation recording at 15 916 ftprad, on 80 tracks on each side
  • ISO/IEC 9541 Information technology – Font information interchange
    • ISO/IEC 9541-1:2012 Part 1: Architecture
    • ISO/IEC 9541-2:2012 Part 2: Interchange Format
    • ISO/IEC 9541-3:2012 Part 3: Glyph shape representation
    • ISO/IEC 9541-4:2009 Part 4: Harmonization to Open Font Format
  • ISO 9542:1988 Information processing systems – Telecommunications and information exchange between systems – End system to Intermediate system routeing exchange protocol for use in conjunction with the Protocol for providing the connectionless-mode network service (ISO 8473)
  • ISO 9543:1989 Information processing systems – Information exchange between systems – Synchronous transmission signal quality at DTE/DCE interfaces
  • ISO/IEC 9545:1994 Information technology – Open Systems Interconnection – Application Layer structure
  • ISO/TR 9547:1988 Programming language processors - Test methods - Guidelines for their development and acceptability
  • ISO/IEC 9548 Information technology – Open Systems Interconnection – Connectionless Session protocol
    • ISO/IEC 9548-1:1996 Protocol specification
    • ISO/IEC 9548-2:1995 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO/IEC 9549:1990 Information technology – Galvanic isolation of balanced interchange circuit
  • ISO 9555 Measurement of liquid flow in open channels – Tracer dilution methods for the measurement of steady flow
    • ISO 9555-1:1994 Part 1: General
    • ISO 9555-3:1992 Part 3: Chemical tracers
    • ISO 9555-4:1992 Part 4: Fluorescent tracers
  • ISO 9564 Financial services – Personal Identification Number (PIN) management and security
  • ISO 9568:1993 Cinematography – Background acoustic noise levels in theatres, review rooms and dubbing rooms
  • ISO/IEC TR 9573:1988 Information processing - SGML support facilities - Techniques for using SGML
    • ISO/IEC TR 9573-11:2004 Part 11: Structure descriptions and style specifications for standards document interchange
    • ISO/IEC TR 9573-13:1991 Part 13: Public entity sets for mathematics and science
  • ISO/IEC 9574:1992 Information technology – Provision of the OSI connection-mode network service by packet mode terminal equipment to an integrated services digital network (ISDN)
  • ISO/IEC TR 9575:1995 Information technology – Telecommunications and information exchange between systems – OSI Routeing Framework
  • ISO/IEC 9576 Information technology – Open Systems Interconnection – Connectionless Presentation protocol
    • ISO/IEC 9576-1:1995 Protocol specification
    • ISO/IEC 9576-2:1995 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO/IEC TR 9577:1999 Information technology – Protocol identification in the network layer
  • ISO/IEC TR 9578:1990 Information technology – Communication interface connectors used in local area networks
  • ISO/IEC 9579:2000 Information technology – Remote database access for SQL with security enhancement
  • ISO 9583:1993 Implants for surgery – Non-destructive testing – Liquid penetrant inspection of metallic surgical implants
  • ISO 9584:1993 Implants for surgery – Non-destructive testing – Radiographic examination of cast metallic surgical implants
  • ISO 9585:1990 Implants for surgery – Determination of bending strength and stiffness of bone plates
  • ISO/IEC 9592 Information technology – Computer graphics and image processing – Programmer's Hierarchical Interactive Graphics System (PHIGS)
  • ISO/IEC 9593 Information technology – Computer graphics – Programmer's Hierarchical Interactive Graphics System (PHIGS) language bindings[Note 3]
  • ISO/IEC 9594 Information technology – Open Systems Interconnection – The Directory
    • ISO/IEC 9594-1:2017 Part 1: Overview of concepts, models and services
    • ISO/IEC 9594-2:2017 Part 2: Models
    • ISO/IEC 9594-3:2017 Part 3: Abstract service definition
    • ISO/IEC 9594-4:2017 Part 4: Procedures for distributed operation
    • ISO/IEC 9594-5:2017 Part 5: Protocol specifications
    • ISO/IEC 9594-6:2017 Part 6: Selected attribute types
    • ISO/IEC 9594-7:2017 Part 7: Selected object classes
    • ISO/IEC 9594-8:2017 Part 8: Public-key and attribute certificate frameworks
    • ISO/IEC 9594-9:2017 Part 9: Replication
  • ISO/IEC 9595:1998 Information technology – Open Systems Interconnection – Common management information service
  • ISO/IEC 9596 Information technology – Open Systems Interconnection – Common management information protocol
    • ISO/IEC 9596-1:1998 Part 1: Specification
    • ISO/IEC 9596-2:1993 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO 9611:1996 Acoustics – Characterization of sources of structure-borne sound with respect to sound radiation from connected structures – Measurement of velocity at the contact points of machinery when resiliently mounted
  • ISO 9613 Acoustics – Attenuation of sound during propagation outdoors
    • ISO 9613-1:1993 Part 1: Calculation of the absorption of sound by the atmosphere
    • ISO 9613-2:1996 Part 2: General method of calculation
  • ISO 9614 Acoustics – Determination of sound power levels of noise sources using sound intensity
    • ISO 9614-1:1993 Part 1: Measurement at discrete points
    • ISO 9614-2:1996 Part 2: Measurement by scanning
    • ISO 9614-3:2002 Part 3: Precision method for measurement by scanning
  • ISO 9626:2016 Stainless steel needle tubing for the manufacture of medical devices – Requirements and test methods
  • ISO/IEC 9636 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Functional specification
    • ISO/IEC 9636-1:1991 Part 1: Overview, profiles, and conformance
    • ISO/IEC 9636-2:1991 Part 2: Control
    • ISO/IEC 9636-3:1991 Part 3: Output
    • ISO/IEC 9636-4:1991 Part 4: Segments
    • ISO/IEC 9636-5:1991 Part 5: Input and echoing
    • ISO/IEC 9636-6:1991 Part 6: Raster
  • ISO/IEC 9637 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) – Data stream binding
    • ISO/IEC 9637-1:1994 Part 1: Character encoding
    • ISO/IEC 9637-2:1992 Part 2: Binary encoding
  • ISO/IEC 9638 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Language bindings
    • ISO/IEC 9638-3:1994 Part 3: Ada
  • ISO 9645:1990 Acoustics – Measurement of noise emitted by two-wheeled mopeds in motion – Engineering method
  • ISO/IEC 9646 Information technology—Open Systems Interconnection—Conformance testing methodology and framework
    • ISO/IEC 9646-1:1994 Part 1: General concepts
    • ISO/IEC 9646-2:1994 Part 2: Abstract Test Suite specification
    • ISO/IEC 9646-3:1998 Part 3: The Tree and Tabular Combined Notation (TTCN)
    • ISO/IEC 9646-4:1994 Part 4: Test realization
    • ISO/IEC 9646-5:1994 Part 5: Requirements on test laboratories and clients for the conformance assessment process
    • ISO/IEC 9646-6:1994 Part 6: Protocol profile test specification
    • ISO/IEC 9646-7:1995 Part 7: Implementation Conformance Statements
  • ISO 9660:1988 Information processing – Volume and file structure of CD-ROM for information interchange
  • ISO/IEC 9661:1994 Information technology – Data interchange on 12,7 mm wide magnetic tape cartridges – 18 tracks, 1 491 data bytes per millimetre
  • ISO 9662:1994 Aircraft equipment - Environmental and operating conditions for airborne equipment - Humidity, temperature and pressure tests
  • ISO 9687:2015 Dentistry - Graphical symbols for dental equipment
  • ISO 9688:1990 Mechanical vibration and shock – Analytical methods of assessing shock resistance of mechanical systems – Information exchange between suppliers and users of analyses
  • ISO 9696:2007 Water quality - Measurement of gross alpha activity in non-saline water - Thick source method
  • ISO 9706:1994 Information and documentation – Paper for documents – Requirements for permanence
  • ISO 9707:2008 Information and documentation - Statistics on the production and distribution of books, newspapers, periodicals and electronic publications
  • ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel
  • ISO 9713:2002 Neurosurgical implants – Self-closing intracranial aneurysm clips
  • ISO 9714 Orthopaedic drilling instruments
    • ISO 9714-1:2012 Part 1: Drill bits, taps and countersink cutters
  • ISO 9735:1988 Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number: 4, Syntax release number: 2)[Note 3]
    • ISO 9735-1:2002 Part 1: Syntax rules common to all parts
    • ISO 9735-2:2002 Part 2: Syntax rules specific to batch EDI
    • ISO 9735-3:2002 Part 3: Syntax rules specific to interactive EDI
    • ISO 9735-4:2002 Part 4: Syntax and service report message for batch EDI (message type – CONTRL)
    • ISO 9735-5:2002 Part 5: Security rules for batch EDI (authenticity, integrity and non-repudiation of origin)
    • ISO 9735-6:2002 Part 6: Secure authentication and acknowledgement message (message type – AUTACK)
    • ISO 9735-7:2002 Part 7: Security rules for batch EDI (confidentiality)
    • ISO 9735-8:2002 Part 8: Associated data in EDI
    • ISO 9735-9:2002 Part 9: Security key and certificate management message (message type – KEYMAN)
    • ISO 9735-10:2014 Part 10: Syntax service directories
  • ISO/IEC 9796 Information technology – Security techniques – Digital signature schemes giving message recovery
    • ISO/IEC 9796-2:2010 Part 2: Integer factorization based mechanisms
    • ISO/IEC 9796-3:2006 Part 3: Discrete logarithm based mechanisms
  • ISO/IEC 9797 Information technology – Security techniques – Message Authentication Codes (MACs)
    • ISO/IEC 9797-1:2011 Part 1: Mechanisms using a block cipher
    • ISO/IEC 9797-2:2011 Part 2: Mechanisms using a dedicated hash-function
    • ISO/IEC 9797-3:2011 Part 3: Mechanisms using a universal hash-function
  • ISO/IEC 9798 Information technology – Security techniques – Entity authentication
    • ISO/IEC 9798-1:2010 Part 1: General
    • ISO/IEC 9798-2:2008 Part 2: Mechanisms using symmetric encipherment algorithms
    • ISO/IEC 9798-3:1998 Part 3: Mechanisms using digital signature
    • ISO/IEC 9798-4:1999 Part 4: Mechanisms using a cryptographic check function
    • ISO/IEC 9798-5:2009 Part 5: Mechanisms using zero-knowledge techniques
    • ISO/IEC 9798-6:2010 Part 6: Mechanisms using manual data transfer
  • ISO 9801:2009 Ophthalmic instruments – Trial case lenses
  • ISO 9802:1996 Raw optical glass – Vocabulary
  • ISO/IEC 9804:1998 Information technology – Open Systems Interconnection – Service definition for the Commitment, Concurrency and Recovery service element
  • ISO/IEC 9805 Information technology – Open Systems Interconnection – Protocol for the Commitment, Concurrency and Recovery service element
    • ISO/IEC 9805-1:1998 Protocol specification
    • ISO/IEC 9805-2:1996 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO/TR 9824:2007 Hydrometry – Measurement of free surface flow in closed conduits
  • ISO 9825:2005 Hydrometry – Field measurement of discharge in large rivers and rivers in flood
  • ISO 9826:1992 Measurement of liquid flow in open channels – Parshall and SANIIRI flumes
  • ISO 9827:1994 Measurement of liquid flow in open channels by weirs and flumes – Streamlined triangular profile weirs
  • ISO/IEC 9834 Information technology – Open Systems Interconnection – Procedures for the operation of OSI Registration Authorities
    • ISO/IEC 9834-1:2012 General procedures and top arcs of the international object identifier tree
    • ISO/IEC 9834-2:1993 Part 2: Registration procedures for OSI document types
    • ISO/IEC 9834-3:2008 Registration of Object Identifier arcs beneath the top-level arc jointly administered by ISO and ITU-T
    • ISO/IEC 9834-4:1991 Part 4: Register of VTE Profiles
    • ISO/IEC 9834-5:1991 Part 5: Register of VT Control Object Definitions
    • ISO/IEC 9834-6:2005 Registration of application processes and application entities
    • ISO/IEC 9834-7:2008 Joint ISO and ITU-T Registration of International Organizations
    • ISO/IEC 9834-8:2014 Part 8: Generation of universally unique identifiers (UUIDs) and their use in object identifiers
    • ISO/IEC 9834-9:2008 Registration of object identifier arcs for applications and services using tag-based identification
  • ISO 9846 Solar energy -- Calibration of a pyranometer using a pyrheliometer
  • ISO 9847 Solar energy -- Calibration of field pyranometers by comparison to a reference pyranometer
  • ISO 9849:2017 Optics and optical instruments - Geodetic and surveying instruments - Vocabulary
  • ISO 9851:1990 Continuous mechanical handling equipment – Overhead electrical monorail conveyors – Definitions and safety rules
  • ISO 9869 Thermal insulation – Building elements – In-situ measurements of thermal resistance and thermal transmittance
  • ISO 9873:2017 Dentistry - Intra-oral mirrors
  • ISO 9878:1990 Micrographics - Graphical symbols for use in microfilming
  • ISO 9897:1997 Freight containers - Container equipment data exchange (CEDEX) - General communication codes
  • ISO/IEC 9899:2018 Programming languages – C
  • ISO 9902 Textile machinery – Noise test code
    • ISO 9902-1:2001 Part 1: Common requirements
    • ISO 9902-2:2001 Part 2: Spinning preparatory and spinning machinery
    • ISO 9902-3:2001 Part 3: Nonwoven machinery
    • ISO 9902-4:2001 Part 4: Yarn processing, cordage and rope manufacturing machinery
    • ISO 9902-5:2001 Part 5: Weaving and knitting preparatory machinery
    • ISO 9902-6:2001 Part 6: Fabric manufacturing machinery
    • ISO 9902-7:2001 Part 7: Dyeing and finishing machinery
  • ISO 9926 Cranes – Training of operators[Note 3]
    • ISO 9926-1:1990 Part 1: General
    • ISO 9926-3:2016 Part 3: Tower cranes
  • ISO/IEC/IEEE 9945:2009 Information technology – Portable Operating System Interface (POSIX®) Base Specifications, Issue 7
  • ISO 9947:2005 Textile machinery and accessories – Two-for-one twisters – Vocabulary
  • ISO 9949 Urine absorbing aids - Vocabulary
    • ISO 9949-1:1993 Part 1: Conditions of urinary incontinence
    • ISO 9949-2:1993 Part 2: Products
    • ISO 9949-3:1993 Part 3: Identification of product types
  • ISO 9951:1993 Measurement of gas flow in closed conduits – Turbine meters
  • ISO 9957 Fluid draughting media
    • ISO 9957-1:1992 Part 1: Water-based India ink – Requirements and test conditions
    • ISO 9957-2:1995 Part 2: Water-based non-India ink – Requirements and test conditions
    • ISO 9957-3:1997 Part 3: Water-based coloured draughting inks – Requirements and test conditions
  • ISO 9958 Draughting media for technical drawings – Draughting film with polyester base
    • ISO 9958-1:1992 Part 1: Requirements and marking
    • ISO 9958-2:1992 Part 2: Determination of properties
  • ISO 9959 Numerically controlled draughting machines – Drawing test for the evaluation of performance
    • ISO 9959-1:1992 Part 1: Vector plotters
  • ISO 9960 Draughting instruments with or without graduation
    • ISO 9960-1:1992 Part 1: Draughting scale rules
  • ISO 9961:1992 Draughting media for technical drawings – Natural tracing paper
  • ISO 9962 Manually operated draughting machines
    • ISO 9962-1:1992 Part 1: Definitions, classification and designation
    • ISO 9962-2:1992 Part 2: Characteristics, performance, inspection and marking
  • ISO/IEC 9973:2013 Information technology - Computer graphics, image processing and environmental data representation - Procedures for registration of items
  • ISO 9984:1996 Information and documentation – Transliteration of Georgian characters into Latin characters
  • ISO 9985:1996 Information and documentation – Transliteration of Armenian characters into Latin characters
  • ISO 9992 Financial transaction cards – Messages between the integrated circuit card and the card accepting device
  • ISO/IEC 9995 Information technology – Keyboard layouts for text and office systems
  • ISO 9997:1999 Dental cartridge syringes
  • ISO 9999 Assistive products for persons with disability – Classification and terminology

Notes
  1. This list generally excludes draft versions.
  2. ISO deliverables include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards".
  3. The exact wording of this title varies between parts. This is the wording of the most recently published part.

References
  1. "Standards catalogue". ISO.
  2. "Freely Available Standards". ISO.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.