Logan Utah Temple

The Logan Utah Temple (formerly the Logan Temple) was completed in 1884, and is the fourth temple built by The Church of Jesus Christ of Latter-day Saints (LDS Church). Located in the city of Logan, Utah, it was the second temple built in the Rocky Mountains, after the St. George Temple, which remains the only LDS temple that has been in operation longer than the Logan Temple.

Logan Utah Temple
Number	2
Dedicated	May 17, 1884 (May 17, 1884) by John Taylor
Site	9 acres (3.6 hectares)
Floor area	119,619 sq ft (11,113 m2)
Height	170 ft (52 m)
Preceded by	St. George Utah Temple
Followed by	Manti Utah Temple
Official website • News & images
Additional information Announced 1863 Groundbreaking May 17, 1877 by John Willard Young Open House February 5 – March 3, 1979 (after renovations) Rededicated March 13, 1979 by Spencer W. Kimball Designed by Truman O. Angell Location 175 North 300 East Logan, Utah United States Exterior finish Dark-colored siliceous limestone Temple design Castellated Gothic Ordinance rooms 4 (stationary sessions) Sealing rooms 11 Clothing rental Available Cafeteria Available Visitors' center Not available

Logan Temple
U.S. National Register of Historic Places
Show map of Utah Show map of the United States
Location	Between 2nd and 3rd East and 1st and 2nd North, Logan, Utah
Coordinates	41°44′03″N 111°49′38″W
Area	over 9 acres (3.6 ha)
Built	1884
Architect	Truman O. Angell
Architectural style	Gothic Revival
NRHP reference No.	75001801[1]
Added to NRHP	November 20, 1975

The temple in Logan was announced on October 6, 1876,[2][3] with its groundbreaking taking place on May 18, 1877. The groundbreaking was shortly after dedication of the St. George Temple on April 6, 1877. The site of the Logan Temple had been held in reserve for many years. It was used as a park and public grounds before being dedicated as the site for the temple. The Salt Lake Temple had been announced in 1847, but construction was still underway and would not be completed until 1893, so the Logan and St. George temples were built to satisfy the church's need for temples.

More than 25,000 people worked on the Logan Temple. Timber used for the temple was hauled from the Temple Fork area of Logan Canyon. Lime and quartzite was quarried out of nearby Green Canyon. Most materials were extracted during winter when farm duties were low and because transporting material was easier on sled than wagon. A combination of hired hands and volunteers were used with wards providing quotas of volunteers. As completion of the temple neared, women in the area were asked to make carpets for the temple, since commercially made carpet could not be bought in Utah at that time. The women spent two months working to hand make 2,144 square yards of carpet.[4]

The Logan Temple was the second temple to be completed in the Utah area and is the church's sixth largest temple. It was built on a 9-acre (3.6 ha) plot selected by Brigham Young and has 4 ordinance rooms and 11 sealing rooms, with a total floor area of 119,619 square feet (11,113.0 m²).The design by the church's head architect, Truman O. Angell, had two towers and was based on the same pattern as the Salt Lake Temple, with a large assembly hall and other similar rooms. On May 17, 1884 the Logan Temple was dedicated by LDS Church president John Taylor. The design incorporates an unusual amount of Gothic detailing compared with other temples, which are more Renaissance or Byzantine-inspired.[3]

In 1917, a fire destroyed much of the southeast stairway of the Logan Temple. Forty thousand dollars was spent to repair it within three months. In 1949, the temple was remodeled and received updated lighting, heating, air conditioning, elevators, and other modern conveniences. In 1977, more remodeling was undertaken and the interior was completely gutted and redone. After remodeling, the temple was rededicated on March 13, 1979 by church president Spencer W. Kimball.

The Logan Temple was placed on the National Register of Historic Places on November 20, 1975.[1]