Free variables and bound variables

In mathematics, and in other disciplines involving formal languages, including mathematical logic and computer science, a free variable is a notation (symbol) that specifies places in an expression where substitution may take place and is not a parameter of this or any container expression. Some older books use the terms real variable and apparent variable for free variable and bound variable, respectively. The idea is related to a placeholder (a symbol that will later be replaced by some value), or a wildcard character that stands for an unspecified symbol.

In computer programming, the term free variable refers to variables used in a function that are neither local variables nor parameters of that function. The term non-local variable is often a synonym in this context.

A bound variable is a variable that was previously free, but has been bound to a specific value or set of values called domain of discourse or universe. For example, the variable $x$ becomes a bound variable when we write:

For all $x$ , $(x + 1) 2 = x 2 + 2 x + 1$ .

or

There exists $x$ such that $x 2 = 2$ .

In either of these propositions, it does not matter logically whether $x$ or some other letter is used. However, it could be confusing to use the same letter again elsewhere in some compound proposition. That is, free variables become bound, and then in a sense retire from being available as stand-in values for other values in the creation of formulae.

The term "dummy variable" is also sometimes used for a bound variable (more often in general mathematics than in computer science), but that use can create an ambiguity with the definition of dummy variables in regression analysis.

Examples

Before stating a precise definition of free variable and bound variable, the following are some examples that perhaps make these two concepts clearer than the definition would:

In the expression

\sum _{k=1}^{10}f(k,n),

n is a free variable and k is a bound variable; consequently the value of this expression depends on the value of n, but there is nothing called k on which it could depend.

In the expression

\int _{0}^{\infty }x^{y-1}e^{-x}\,dx,

y is a free variable and x is a bound variable; consequently the value of this expression depends on the value of y, but there is nothing called x on which it could depend.

In the expression

\lim _{h\rightarrow 0}{\frac {f(x+h)-f(x)}{h}},

x is a free variable and h is a bound variable; consequently the value of this expression depends on the value of x, but there is nothing called h on which it could depend.

In the expression

\forall x\ \exists y\ {\Big [}\varphi (x,y,z){\Big ]},

z is a free variable and x and y are bound variables, associated with logical quantifiers; consequently the logical value of this expression depends on the value of z, but there is nothing called x or y on which it could depend.

More widely, in most of the proofs, we are using bound variables. In the following proof showing that every square of even integer is divisible by $4$

Let

n

be a positive even integer. Then there is an integer

k

such that

n=2k

. Since

n^{2}=4k^{2}

, we have

n^{2}

divisible by

4

not only k but also n have been used as bound variables as a whole in the proof.

Variable-binding operators

The following

\sum _{x\in S}\quad \quad \prod _{x\in S}\quad \quad \int _{0}^{\infty }\cdots \,dx\quad \quad \lim _{x\to 0}\quad \quad \forall x\quad \quad \exists x

are some common variable-binding operators. Each of them binds the variable x for some set S.

Note that many of these are operators which act on functions of the bound variable. In more complicated contexts, such notations can become awkward and confusing. It can be useful to switch to notations which make the binding explicit, such as

\sum _{1,\ldots ,10}\left(k\mapsto f(k,n)\right)

for sums or

D\left(x\mapsto x^{2}+2x+1\right)

for differentiation.

Formal explanation

Tree summarizing the syntax of the expression

\forall x\,((\exists y\,A(x))\vee B(z))

Variable-binding mechanisms occur in different contexts in mathematics, logic and computer science. In all cases, however, they are purely syntactic properties of expressions and variables in them. For this section we can summarize syntax by identifying an expression with a tree whose leaf nodes are variables, constants, function constants or predicate constants and whose non-leaf nodes are logical operators. This expression can then be determined by doing an inorder traversal of the tree. Variable-binding operators are logical operators that occur in almost every formal language. Languages that do not have them may be either extremely inexpressive or extremely difficult to use. A binding operator Q takes two arguments: a variable v and an expression P, and when applied to its arguments produces a new expression Q(v, P). The meaning of binding operators is supplied by the semantics of the language and does not concern us here.

Variable binding relates three things: a variable v, a location a for that variable in an expression and a non-leaf node n of the form Q(v, P). Note: we define a location in an expression as a leaf node in the syntax tree. Variable binding occurs when that location is below the node n.

In the lambda calculus, x is a bound variable in the term M = λx. T and a free variable in the term T. We say x is bound in M and free in T. If T contains a subterm λx. U then x is rebound in this term. This nested, inner binding of x is said to "shadow" the outer binding. Occurrences of x in U are free occurrences of the new x.[1]

Variables bound at the top level of a program are technically free variables within the terms to which they are bound but are often treated specially because they can be compiled as fixed addresses. Similarly, an identifier bound to a recursive function is also technically a free variable within its own body but is treated specially.

A closed term is one containing no free variables.

Function expressions

To give an example from mathematics, consider an expression which defines a function

f=\left[(x_{1},\ldots ,x_{n})\mapsto t\right]

where t is an expression. t may contain some, all or none of the x₁, …, x_n and it may contain other variables. In this case we say that function definition binds the variables x₁, …, x_n.

In this manner, function definition expressions of the kind shown above can be thought of as the variable binding operator, analogous to the lambda expressions of lambda calculus. Other binding operators, like the summation sign, can be thought of as higher-order functions applying to a function. So, for example, the expression

\sum _{x\in S}{x^{2}}

could be treated as a notation for

\sum _{S}{(x\mapsto x^{2})}

where $\sum _{S}{f}$ is an operator with two parameters—a one-parameter function, and a set to evaluate that function over. The other operators listed above can be expressed in similar ways; for example, the universal quantifier $\forall x\in S\ P(x)$ can be thought of as an operator that evaluates to the logical conjunction of the boolean-valued function P applied over the (possibly infinite) set S.

Natural language

When analyzed in formal semantics, natural languages can be seen to have free and bound variables. In English, personal pronouns like he, she, they, etc. can act as free variables.

Lisa found her book.

In the sentence above, the possessive pronoun her is a free variable. It may refer to the previously mentioned Lisa or to any other female. In other words, her book could be referring to Lisa's book (an instance of coreference) or to a book that belongs to a different female (e.g. Jane's book). Whoever the referent of her is can be established according to the situational (i.e. pragmatic) context. The identity of the referent can be shown using coindexing subscripts where i indicates one referent and j indicates a second referent (different from i). Thus, the sentence Lisa found her book has the following interpretations:

Lisa_i found her_i book. (interpretation #1: her = of Lisa)

Lisa_i found her_j book. (interpretation #2: her = of a female that is not Lisa)

The distinction is not purely of academic interest, as some languages do actually have different forms for her_i and her_j: for example, Norwegian and Swedish translate coreferent her_i as sin and noncoreferent her_j as hennes.

English does allow specifying coreference, but it is optional, as both interpretations of the previous example are valid (the ungrammatical interpretation is indicated with an asterisk):

Lisa_i found her_i own book. (interpretation #1: her = of Lisa)

*Lisa_i found her_j own book. (interpretation #2: her = of a female that is not Lisa)

However, reflexive pronouns, such as himself, herself, themselves, etc., and reciprocal pronouns, such as each other, act as bound variables. In a sentence like the following:

Jane hurt herself.

the reflexive herself can only refer to the previously mentioned antecedent, in this case Jane, and can never refer to a different female person. In this example, the variable herself is bound to the noun Jane that occurs in subject position. Indicating the coindexation, the first interpretation with Jane and herself coindexed is permissible, but the other interpretation where they are not coindexed is ungrammatical:

Jane_i hurt herself_i. (interpretation #1: herself = Jane)

*Jane_i hurt herself_j. (interpretation #2: herself = a female that is not Jane)

Note that the coreference binding can be represented using a lambda expression as mentioned in the previous Formal explanation section. The sentence with the reflexive could be represented as

(λx.x hurt x)Jane

in which Jane is the subject referent argument and λx.x hurt x is the predicate function (a lambda abstraction) with the lambda notation and x indicating both the semantic subject and the semantic object of sentence as being bound. This returns the semantic interpretation JANE hurt JANE with JANE being the same person.

Pronouns can also behave in a different way. In the sentence below

Ashley hit her.

the pronoun her can only refer to a female that is not Ashley. This means that it can never have a reflexive meaning equivalent to Ashley hit herself. The grammatical and ungrammatical interpretations are:

*Ashley_i hit her_i. (interpretation #1: her = Ashley)

Ashley_i hit her_j. (interpretation #2: her = a female that is not Ashley)

The first interpretation is impossible. Only the second interpretation is permitted by the grammar.

Thus, it can be seen that reflexives and reciprocals are bound variables (known technically as anaphors) while true pronouns are free variables in some grammatical structures but variables that cannot be bound in other grammatical structures. The binding phenomena found in natural languages was particularly important to the syntactic government and binding theory (see also: Binding (linguistics)).

References

Thompson 1991, p. 33.

Thompson, Simon (1991). Type theory and functional programming. Wokingham, England: Addison-Wesley. ISBN 0201416670. OCLC 23287456.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[FOOTNOTEThompson199133-1] Thompson 1991, p. 33.

Calculus
Precalculus	Binomial theorem Concave function Continuous function Factorial Finite difference Free variables and bound variables Graph of a function Linear function Radian Rolle's theorem Secant Slope Tangent
Limits	Indeterminate form Limit of a function One-sided limit Limit of a sequence Order of approximation (ε, δ)-definition of limit
Differential calculus	Derivative Differential Differential equation Differential operator Mean value theorem Notation Leibniz's notation Newton's notation Rules of differentiation linearity Power Sum Chain L'Hôpital's Product General Leibniz's rule Quotient Other techniques Implicit differentiation Inverse functions and differentiation Logarithmic derivative Related rates Stationary points First derivative test Second derivative test Extreme value theorem Maxima and minima Further applications Newton's method Taylor's theorem
Integral calculus	Antiderivative Arc length Basic properties Constant of integration Differentiation under the integral sign Fundamental theorem of calculus Differentiating under the integral sign Integration by parts Integration by substitution trigonometric Euler Weierstrass Partial fractions in integration Quadratic integral Trapezoidal rule Volumes Washer method Shell method
Vector calculus	Derivatives Curl Directional derivative Divergence Gradient Laplacian Basic theorems Line integrals Green's Stokes' Gauss'
Multivariable calculus	Divergence theorem Geometric Hessian matrix Jacobian matrix and determinant Lagrange multiplier Line integral Matrix Multiple integral Partial derivative Surface integral Volume integral Advanced topics Differential forms Exterior derivative Generalized Stokes' Theorem Tensor calculus
Sequences and series	Arithmetico–geometric sequence Types of series Alternating Binomial Fourier Geometric Harmonic Infinite Power Maclaurin Taylor Telescoping Tests of convergence Abel's Alternating series Cauchy condensation Direct comparison Dirichlet's Integral Limit comparison Ratio Root Term
Special functions and numbers	Bernoulli numbers e (mathematical constant) Exponential function Natural logarithm Stirling's approximation
History of calculus	Adequality Brook Taylor Colin Maclaurin Generality of algebra Gottfried Wilhelm Leibniz Infinitesimal Infinitesimal calculus Isaac Newton Fluxion Law of Continuity Leonhard Euler Method of Fluxions The Method of Mechanical Theorems
Lists	Differentiation rules List of integrals of exponential functions List of integrals of hyperbolic functions List of integrals of inverse hyperbolic functions List of integrals of inverse trigonometric functions List of integrals of irrational functions List of integrals of logarithmic functions List of integrals of rational functions List of integrals of trigonometric functions Secant Secant cubed List of limits Lists of integrals
Miscellaneous topics	Differential geometry curvature of curves of surfaces Euler–Maclaurin formula Gabriel's Horn Proof that 22/7 exceeds π Regiomontanus' angle maximization problem Steinmetz solid

Free variables and bound variables

Examples

Variable-binding operators

Formal explanation

Function expressions

Natural language

See also

References