Sulfamic acid

Sulfamic acid, also known as amidosulfonic acid, amidosulfuric acid, aminosulfonic acid, and sulfamidic acid, is a molecular compound with the formula H3NSO3. This colourless, water-soluble compound finds many applications. Sulfamic acid melts at 205 °C before decomposing at higher temperatures to water, sulfur trioxide, sulfur dioxide and nitrogen.[2]

Sulfamic acid
Ball-and-stick model of the canonical neutral form
Ball-and-stick model of the zwitterionic form
Names
IUPAC name
Sulfamic acid
Identifiers
3D model (JSmol)
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.023.835
EC Number
  • 226-218-8
RTECS number
  • WO5950000
UNII
UN number 2967
Properties
H3NSO3
Molar mass 97.10 g/mol
Appearance white crystals
Density 2.15 g/cm3
Melting point 205 °C (401 °F; 478 K) decomposes
Moderate, with slow hydrolysis
Solubility
  • Moderately soluble in DMF
  • Slightly soluble in MeOH
  • Insoluble in hydrocarbons
Acidity (pKa) 1.0[1]
Hazards
Safety data sheet ICSC 0328
Irritant (Xi)
R-phrases (outdated) R36/38 R52/53
S-phrases (outdated) (S2) S26 S28 S61
Related compounds
Other cations
Ammonium sulfamate
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Y verify (what is YN ?)
Infobox references

Sulfamic acid (H3NSO3) may be considered an intermediate compound between sulfuric acid (H2SO4), and sulfamide (H4N2SO2), effectively replacing a hydroxyl (–OH) group with an amine (–NH2) group at each step. This pattern can extend no further in either direction without breaking down the sulfonyl (–SO2–) moiety. Sulfamates are derivatives of sulfamic acid.

Production

Sulfamic acid is produced industrially by treating urea with a mixture of sulfur trioxide and sulfuric acid (or oleum). The conversion is conducted in two stages:

OC(NH2)2 + SO3 → OC(NH2)(NHSO3H)
OC(NH2)(NHSO3H) + H2SO4 → CO2 + 2 H3NSO3

In this way, approximately 96,000 tonnes were produced in 1995.[3]

Structure and reactivity

Ball-and-stick model of a sulfamic acid zwitterion as it occurs in the crystal state.[4]

The compound is well described by the formula H3NSO3, not the tautomer H2NSO2(OH). The relevant bond distances are 1.44 Å for the S=O and 1.77 Å for the S–N. The greater length of the S–N is consistent with a single bond.[5] Furthermore, a neutron diffraction study located the hydrogen atoms, all three of which are 1.03 Å distant from the nitrogen.[4] In the solid state, the molecule of sulfamic acid is well described by a zwitterionic form.

Aqueous solutions of sulfamic acid are unstable and slowly hydrolyse to ammonium bisulfate, but the crystalline solid is indefinitely stable under ordinary storage conditions. Its behaviour resembles that of urea, (H2N)2CO. Both feature amino groups linked to electron-withdrawing centres that can participate in delocalised bonding. Both liberate ammonia upon heating in water ; however, the sulfamic acid reverts to sulfuric acid , in place of the CO2 that urea would release, according to the following reaction :

H3NSO3 + H2O → H2SO4 + NH3

Acid–base reactions

Sulfamic acid is a moderately strong acid, Ka = 0.101 (pKa = 0.995). Because the solid is not hygroscopic, it is used as a standard in acidimetry (quantitative assays of acid content).

H3NSO3 + NaOH → NaH2NSO3 + H2O

Double deprotonation can be effected in ammonia solution to give the anion HNSO2−
3
.[6]

H3NSO3 + 2 NH3HNSO2−
3
+ 2 NH+
4

Reaction with nitric and nitrous acids

With nitrous acid, sulfamic acid reacts to give nitrogen:

HNO2 + H3NSO3 → H2SO4 + N2 + H2O

while with nitric acid, it affords nitrous oxide:[7]

HNO3 + H3NSO3 → H2SO4 + N2O + H2O

Reaction with hypochlorite

The reaction of excess hypochlorite ions with sulfamic acid or a sulfamate salt gives rise reversibly to both N-chlorosulfamate and N,N-dichlorosulfamate ions.[8][9][10]

HClO + H2NSO3H → ClNHSO3H + H2O
HClO + ClNHSO3H Cl2NSO3H + H2O

Consequently, sulfamic acid is used as hypochlorite scavenger in the oxidation of aldehydes with chlorite such as the Pinnick oxidation.

Reaction with alcohol

Upon heating sulfamic acid will react with alcohols to form the corresponding organosulfates. It is more expensive than other reagents for doing this, such as chlorosulfonic acid or oleum, but is also significantly milder and will not sulfonate aromatic rings. Products are produced as their ammonium salts. Such reactions can be catalyzed by the presence of urea.[10]

ROH + H2NSO3H → ROS(O)2O + NH+
4

Without the presence of any catalysts, sulfamic acid will not react with ethanol at temperatures below 100 °C .

Applications

Sulfamic acid is mainly a precursor to sweet-tasting compounds. Reaction with cyclohexylamine followed by addition of NaOH gives C6H11NHSO3Na, sodium cyclamate. Related compounds are also sweeteners, such as acesulfame potassium.

Sulfamates have been used in the design of many types of therapeutic agents such as antibiotics, nucleoside/nucleotide human immunodeficiency virus (HIV) reverse transcriptase inhibitors, HIV protease inhibitors (PIs), anticancer drugs (steroid sulfatase and carbonic anhydrase inhibitors), antiepileptic drugs, and weight loss drugs.[11]

Cleaning agent

Sulfamic acid is used as an acidic cleaning agent, sometimes pure or as a component of proprietary mixtures, typically for metals and ceramics. It is frequently used for removing rust and limescale, replacing the more volatile and irritating hydrochloric acid, which is cheaper. It is often a component of household descaling agents, for example, Lime-A-Way Thick Gel contains up to 8% sulfamic acid and has pH 2.0–2.2,[12] or detergents used for removal of limescale. When compared to most of the common strong mineral acids, sulfamic acid has desirable water descaling properties, low volatility, and low toxicity. It forms water-soluble salts of calcium and ferric iron.

Sulfamic acid is preferable to hydrochloric acid in household use, due to its intrinsic safety. If erroneously mixed with hypochlorite based products such as bleach, it does not form chlorine gas, whereas the most common acids would; the reaction (neutralisation) with ammonia, produces a salt, as depicted in the section above.

It also finds applications in the industrial cleaning of dairy and brewhouse equipment. Although it is considered less corrosive than hydrochloric acid, corrosion inhibitors are often added to the commercial cleansers of which it is a component. It can be used for descaling home coffee and espresso machines and in denture cleaners.

Other uses

Silver polishing

According to the label on the consumer product, the liquid silver cleaning product TarnX contains thiourea, a detergent, and sulfamic acid.

References

  1. Candlin, J. P.; Wilkins, R. G. (1960). "828. Sulphur–nitrogen compounds. Part I. The hydrolysis of sulphamate ion in perchloric acid". Journal of the Chemical Society (Resumed): 4236–4241. doi:10.1039/JR9600004236.
  2. Yoshikubo, K.; Suzuki, M. (2000). "Sulfamic Acid and Sulfamates". Kirk-Othmer Encyclopedia of Chemical Technology. doi:10.1002/0471238961.1921120625151908.a01. ISBN 0471238961.
  3. Metzger, A. "Sulfamic Acid". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a25_439.
  4. Sass, R. L. (1960). "A neutron diffraction study on the crystal structure of sulfamic acid". Acta Crystallographica. 13 (4): 320–324. doi:10.1107/S0365110X60000789.
  5. Bats, J. W.; Coppens, P.; Koetzle, T. F. (1977). "The experimental charge density in sulfur-containing molecules. A study of the deformation electron density in sulfamic acid at 78 K by X-ray and neutron diffraction". Acta Crystallographica Section B. 33: 37–45. doi:10.1107/S0567740877002568.
  6. Clapp, L. B. (1943). "Sulfamic acid and its uses". Journal of Chemical Education. 20 (4): 189–346. doi:10.1021/ed020p189.
  7. Dzelzkalns, Laila; Bonner, Francis (1978). "Reaction between nitric and sulfamic acids in aqueous solution". Inorganic Chemistry. 17 (12): 3710–3711. doi:10.1021/ic50190a080.
  8. US 3328294
  9. FR 2087248
  10. Benson, G. Anthony; Spillane, William J. (1980). "Sulfamic acid and its N-substituted derivatives". Chemical Reviews. 80 (2): 151–186. doi:10.1021/cr60324a002. ISSN 0009-2665.
  11. Winum, J. Y.; Scozzafava, A.; Montero, J. L.; Supuran, C. T. (2005). "Sulfamates and their therapeutic potential". Medicinal Research Reviews. 25 (2): 186–228. doi:10.1002/med.20021. PMID 15478125.
  12. Benckiser, Reckitt. "Material Safety Data Sheet – Lime-A-Way Lime, Calcium and Rust Cleaner (Trigger Spray)" (PDF). hardwarestore.com. Archived from the original (PDF) on 17 July 2011. Retrieved 17 November 2011.

Further reading

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.