Binary silicon-hydrogen compounds

Binary silicon-hydrogen compounds are saturated chemical compounds with the empirical formula SixHy. All contain tetrahedral silicon and terminal hydrides. They only have Si–H and Si–Si single bonds. The bond lengths are 146.0 pm for a Si–H bond and 233 pm for a Si–Si bond. The structures of the silanes are analogues of the alkanes, starting with silane, SiH
4, the analogue of methane, continuing with disilane Si
2H
6, the analogue of ethane, etc. They are mainly of theoretical or academic interest.[1]

This article is about the class of chemical compounds with the formula SixHy. For the compound SiH4, see Silane. For organic analogues, see organosilicon chemistry.
Chemical structure of disilane, which is structurally similar to ethane.

Inventory
Cyclopentasilane is structurally similar to cyclopentane, just larger.

The simplest isomer of a silane is the one in which the silicon atoms are arranged in a single chain with no branches. This isomer is sometimes called the n-isomer (n for "normal", although it is not necessarily the most common). However the chain of silicon atoms may also be branched at one or more points. The number of possible isomers increases rapidly with the number of silicon atoms. The members of the series (in terms of number of silicon atoms) follow:

silane, SiH
4 - one silicon and four hydrogen
disilane, Si
2H
6 - two silicon and six hydrogen, ethane-like structure
trisilane, Si
3H
8 - three silicon and 8 hydrogen, propane-like structure
tetrasilane, Si
4H
10 - four silicon and 10 hydrogen (two isomers: tetrasilane & isotetrasilane, analogous to butane and isobutane)
pentasilane, Si
5H
12 - five silicon and 12 hydrogen (three isomers: pentasilane, isopentasilane & neopentasilane)

Silanes are named by adding the suffix -silane to the appropriate numerical multiplier prefix. Hence, disilane, Si
2H
6; trisilane Si
3H
8; tetrasilane Si
4H
10; pentasilane Si
5H
12; etc. The prefix is generally Greek, with the exceptions of nonasilane which has a Latin prefix, and undecasilane and tridecasilane which have mixed-language prefixes. Solid phase polymeric silicon hydrides called polysilicon hydrides are also known. When hydrogen in a linear polysilene polysilicon hydride is replaced with alkyl or aryl side-groups, the term polysilane is used.

3-Silylhexasilane, H3SiSiH2SiH(SiH3)SiH2SiH2SiH3, is the simplest chiral binary noncyclic silicon hydride.

Cyclosilanes also exist. They are structurally analogous to the cycloalkanes, with the formula SinH2n, n > 2.

Data for small silanes[1]
Silane Formula Boiling point [°C] Melting point [°C] Density [g cm−3] (at 25 °C)
Silane SiH
4		 −112 −185 gas
Disilane Si
2H
6		 −14 −132 gas
Trisilane Si
3H
8		 53 −117 0.743
cyclotrisilane Si
3H
6
Tetrasilane Si
4H
10		 108 −90 0.793
n-Pentasilane Si
5H
12		 153 −72.8 0.827
cyclopentasilane Si
5H
10		 194 −10.5 0.963
n-Hexasilane Si
6H
14		 193.6 −44.7 0.847

Production

Early work was conducted by Alfred Stock and Carl Somiesky.[2] Although monosilane and disilane were already known, Stock and Somiesky discovered, beginning in 1916, the next four members of the SinH2n+2 series, up to n = 6. They also documented the formation of solid phase polymeric silicon hydrides.[3] One of their synthesis methods involved the hydrolysis of metal silicides. This method produces a mixture of silanes, which required separation on a high vacuum line.[4][5][6]

The silanes (SinH2n+2) are less thermally stable than alkanes (CnH2n+2). They tend to undergo dehydrogenation, yielding hydrogen and polysilanes. For this reason, the isolation of silanes higher than heptasilane has proved difficult.[7]

The Schlesinger process is used to prepare silanes by the reaction of perchlorosilanes with lithium aluminium hydride.

Applications
Main article: Silane § Applications

The single but significant application for SiH4 is in the microelectronics industry. By metal organic chemical vapor deposition, silane is converted to silicon by thermal decomposition:

SiH4 → Si + 2 H2

Retentive silanes with broad spectrum antimicrobial activities, low cytotoxicity, does not allow pathogens is used for control of gross microbial colonization.

Hazards

Silane is explosive when mixed with air (1 – 98% SiH4). Other lower silanes can also form explosive mixtures with air. The lighter liquid silanes are highly flammable, but this risk decreases with the length of the silicon chain as was discovered by Peter Plichta. Silanes above Heptasilane don't react spontaneously and can be stored like gasoline. Higher silanes have therefore the potential to replace hydrocarbons as storable energy source with the advantage to react not only with oxygen but also with nitrogen.

Considerations for detection/risk control:

  • Silane is slightly denser than air (possibility of pooling at ground levels/pits)
  • Disilane is denser than air (possibility of pooling at ground levels/pits)
  • Trisilane is denser than air (possibility of pooling at ground levels/pits)

Nomenclature
Main article: IUPAC nomenclature of inorganic chemistry 2005

The IUPAC nomenclature (systematic way of naming compounds) for silanes is based on identifying hydrosilicon chains. Unbranched, saturated hydrosilicon chains are named systematically with a Greek numerical prefix denoting the number of silicons and the suffix "-silane".

IUPAC naming conventions can be used to produce a systematic name.

The key steps in the naming of more complicated branched silanes are as follows:

  • Identify the longest continuous chain of silicon atoms
  • Name this longest root chain using standard naming rules
  • Name each side chain by changing the suffix of the name of the silane from "-ane" to "-anyl", except for "silane" which becomes "silyl"
  • Number the root chain so that the sum of the numbers assigned to each side group will be as low as possible
  • Number and name the side chains before the name of the root chain

The nomenclature parallels that of alkyl radicals.

Silanes can also be named like any other inorganic compound; in this naming system, silane is named silicon tetrahydride. However, with longer silanes, this becomes cumbersome.

References
  1. Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8.
  2. E. Wiberg, Alfred Stock and the Renaissance of Inorganic Chemistry," Pure Appl. Chem., Vol. 49 (1977) pp. 691-700.
  3. J. W. Mellor, "A Comprehensive Treatise on Inorganic and Theoretical Chemistry," Vol. VI, Longman, Green and Co. (1947) pp. 223 - 227.
  4. Hydrides of Boron and Silicon. Ithaca (USA) 1933.
  5. Stock, A.; Stiebeler, P.; Zeidler, F. (1923). "Siliciumwasserstoffe, XVI. Die höheren Siliciumhydride". Ber. Dtsch. Chem. Ges. B. 56B: 1695-1705. doi:10.1002/cber.19230560735.
  6. P. W. Schenk (1963). "Silanes SiH4 (Si2H6, Si3H8)". In G. Brauer (ed.). Handbook of Preparative Inorganic Chemistry, 2nd Ed. 1. NY, NY: Academic Press. pp. 679–680.
  7. W. W. Porterfield "Inorganic Chemistry: A Unified Approach," Academic Press (1993) p. 219.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.