Euclidean tilings by convex regular polygons

Following Grünbaum and Shephard (section 1.3), a tiling is said to be regular if the symmetry group of the tiling acts transitively on the flags of the tiling, where a flag is a triple consisting of a mutually incident vertex, edge and tile of the tiling. This means that, for every pair of flags, there is a symmetry operation mapping the first flag to the second. This is equivalent to the tiling being an edge-to-edge tiling by congruent regular polygons. There must be six equilateral triangles, four squares or three regular hexagons at a vertex, yielding the three regular tessellations.

Regular tilings (3)

p6m, *632		p4m, *442
36 (t=1, e=1)	63 (t=1, e=1)	44 (t=1, e=1)

Vertex-transitivity means that for every pair of vertices there is a symmetry operation mapping the first vertex to the second.[1]

If the requirement of flag-transitivity is relaxed to one of vertex-transitivity, while the condition that the tiling is edge-to-edge is kept, there are eight additional tilings possible, known as Archimedean, uniform or demiregular tilings. Note that there are two mirror image (enantiomorphic or chiral) forms of 3⁴.6 (snub hexagonal) tiling, only one of which is shown in the following table. All other regular and semiregular tilings are achiral.

Uniform tilings (8)

p6m, *632
3.122 (t=2, e=2) t{6,3}	3.4.6.4 (t=3, e=2) rr{3,6}	4.6.12 (t=3, e=3) tr{3,6}	(3.6)2 (t=2, e=1) r{6,3}
4.82 (t=2, e=2) t{4,4}	32.4.3.4 (t=2, e=2) s{4,4}	33.42 (t=2, e=3) {3,6}:e	34.6 (t=3, e=3) sr{3,6}

Grünbaum and Shephard distinguish the description of these tilings as Archimedean as referring only to the local property of the arrangement of tiles around each vertex being the same, and that as uniform as referring to the global property of vertex-transitivity. Though these yield the same set of tilings in the plane, in other spaces there are Archimedean tilings which are not uniform.

3-uniform tiling #57 of 61 colored

by sides, yellow triangles, red squares (by polygons)

by 4-isohedral positions, 3 shaded colors of triangles (by orbits)

Such periodic tilings may be classified by the number of orbits of vertices, edges and tiles. If there are k orbits of vertices, a tiling is known as k-uniform or k-isogonal; if there are t orbits of tiles, as t-isohedral; if there are e orbits of edges, as e-isotoxal.

k-uniform tilings with the same vertex figures can be further identified by their wallpaper group symmetry.

1-uniform tilings include 3 regular tilings, and 8 semiregular ones, with 2 or more types of regular polygon faces. There are 20 2-uniform tilings, 61 3-uniform tilings, 151 4-uniform tilings, 332 5-uniform tilings and 673 6-uniform tilings. Each can be grouped by the number m of distinct vertex figures, which are also called m-Archimedean tilings.[2]

Finally, if the number of types of vertices is the same as the uniformity (m = k below), then the tiling is said to be Krotenheerdt. In general, the uniformity is greater than or equal to the number of types of vertices (m ≥ k), as different types of vertices necessarily have different orbits, but not vice versa. Setting m = n = k, there are 11 such tilings for n = 1; 20 such tilings for n = 2; 39 such tilings for n = 3; 33 such tilings for n = 4; 15 such tilings for n = 5; 10 such tilings for n = 6; and 7 such tilings for n = 7.

Dissected regular polygons

Some of the k-uniform tilings can be derived by symmetrically dissecting the tiling polygons with interior edges, for example (direct dissection):

Dissected polygons with original edges

Hexagon	Dodecagon (each has 2 orientations)

Some k-uniform tilings can be derived by dissecting regular polygons with new vertices along the original edges, for example (indirect dissection):

Dissected with 1 or 2 middle vertex

Triangle			Square		Hexagon

Finally, to see all types of vertex configurations, see Planigon.

2-uniform tilings

There are twenty (20) 2-uniform tilings of the Euclidean plane. (also called 2-isogonal tilings or demiregular tilings)[4][5][6] Vertex types are listed for each. If two tilings share the same two vertex types, they are given subscripts 1,2.

2-uniform tilings (20)

p6m, *632						p4m, *442
[36; 32.4.3.4 (t=3, e=3)	[3.4.6.4; 32.4.3.4 (t=4, e=4)	[3.4.6.4; 33.42] (t=4, e=4)	[3.4.6.4; 3.42.6] (t=5, e=5)	[4.6.12; 3.4.6.4] (t=4, e=4)	[36; 32.4.12] (t=4, e=4)	[3.12.12; 3.4.3.12] (t=3, e=3)
p6m, *632	p6, 632	p6, 632	cmm, 2*22	pmm, *2222	cmm, 2*22	pmm, *2222
[36; 32.62] (t=2, e=3)	[36; 34.6]1 (t=3, e=3)	[36; 34.6]2 (t=5, e=7)	[32.62; 34.6] (t=2, e=4)	[3.6.3.6; 32.62] (t=2, e=3)	[3.42.6; 3.6.3.6]2 (t=3, e=4)	[3.42.6; 3.6.3.6]1 (t=4, e=4)
p4g, 4*2	pgg, 22×	cmm, 2*22	cmm, 2*22	pmm, *2222	cmm, 2*22
[33.42; 32.4.3.4]1 (t=4, e=5)	[33.42; 32.4.3.4]2 (t=3, e=6)	[44; 33.42]1 (t=2, e=4)	[44; 33.42]2 (t=3, e=5)	[36; 33.42]1 (t=3, e=4)	[36; 33.42]2 (t=4, e=5)

k-uniform tilings have been enumerated up to 6. There are 673 6-uniform tilings of the Euclidean plane. Brian Galebach's search reproduced Krotenheerdt's list of 10 6-uniform tilings with 6 distinct vertex types, as well as finding 92 of them with 5 vertex types, 187 of them with 4 vertex types, 284 of them with 3 vertex types, and 100 with 2 vertex types.

Fractalizing k-uniform tilings

There are many ways of generating new k-uniform tilings from old k-uniform tilings. For example, notice that the 2-uniform [3.12.12; 3.4.3.12] tiling has a square lattice, the 4(3-1)-uniform [343.12; (3.12²)3] tiling has a snub square lattice, and the 5(3-1-1)-uniform [334.12; 343.12; (3.12.12)3] tiling has an elongated triangular lattice. These higher-order uniform tilings use the same lattice but possess greater complexity. The fractalizing basis for theses tilings is as follows:[7]

	Triangle	Square	Hexagon	Dissected Dodecagon
Shape
Fractalizing

The side lengths are dilated by a factor of ${\displaystyle 2+{\sqrt {3}}}$.

This can similarly be done with the truncated trihexagonal tiling as a basis, with corresponding dilation of ${\displaystyle 3+{\sqrt {3}}}$.

	Triangle	Square	Hexagon	Dissected Dodecagon
Shape
Fractalizing

Fractalizing Examples

	Truncated Hexagonal Tiling	Truncated Trihexagonal Tiling
Fractalizing

Convex regular polygons can also form plane tilings that are not edge-to-edge. Such tilings can be considered edge-to-edge as nonregular polygons with adjacent colinear edges.

There are seven families of isogonal each family having a real-valued parameter determining the overlap between sides of adjacent tiles or the ratio between the edge lengths of different tiles. Two of the families are generated from shifted square, either progressive or zig-zagging positions. Grünbaum and Shephard call these tilings uniform although it contradicts Coxeter's definition for uniformity which requires edge-to-edge regular polygons.[8] Such isogonal tilings are actually topologically identical to the uniform tilings, with different geometric proportions.

Periodic isogonal tilings by non-edge-to-edge convex regular polygons

1	2	3	4	5	6	7
Rows of squares with horizontal offsets		Rows of triangles with horizontal offsets	A tiling by squares	Three hexagons surround each triangle	Six triangles surround every hexagon.	Three size triangles
cmm (2*22)	p2 (2222)	cmm (2*22)	p4m (*442)	p6 (632)		p3 (333)
Hexagonal tiling		Square tiling	Truncated square tiling	Truncated hexagonal tiling	Hexagonal tiling	Trihexagonal tiling

• Grünbaum, Branko; Shephard, Geoffrey C. (1977). "Tilings by regular polygons". Math. Mag. 50 (5): 227–247. doi:10.2307/2689529. JSTOR 2689529.
• Grünbaum, Branko; Shephard, G. C. (1978). "The ninety-one types of isogonal tilings in the plane". Trans. Am. Math. Soc. 252: 335–353. doi:10.1090/S0002-9947-1978-0496813-3. MR 0496813.
• Debroey, I.; Landuyt, F. (1981). "Equitransitive edge-to-edge tilings". Geometriae Dedicata. 11 (1): 47–60. doi:10.1007/BF00183189. S2CID 122636363.
• Grünbaum, Branko; Shephard, G. C. (1987). Tilings and Patterns. W. H. Freeman and Company. ISBN 0-7167-1193-1.
• Ren, Ding; Reay, John R. (1987). "The boundary characteristic and Pick's theorem in the Archimedean planar tilings". J. Combinat. Theory A. 44 (1): 110–119. doi:10.1016/0097-3165(87)90063-X.
• Chavey, D. (1989). "Tilings by Regular Polygons—II: A Catalog of Tilings". Computers & Mathematics with Applications. 17: 147–165. doi:10.1016/0898-1221(89)90156-9.
• Order in Space: A design source book, Keith Critchlow, 1970 ISBN 978-0-670-52830-1
• Sommerville, Duncan MacLaren Young (1958). An Introduction to the Geometry of n Dimensions. Dover Publications. Chapter X: The Regular Polytopes
• Préa, P. (1997). "Distance sequences and percolation thresholds in Archimedean Tilings". Mathl. Comput. Modelling. 26 (8–10): 317–320. doi:10.1016/S0895-7177(97)00216-1.
• Kovic, Jurij (2011). "Symmetry-type graphs of Platonic and Archimedean solids". Math. Commun. 16 (2): 491–507.
• Pellicer, Daniel; Williams, Gordon (2012). "Minimal Covers of the Archimedean Tilings, Part 1". The Electronic Journal of Combinatorics. 19 (3): #P6. doi:10.37236/2512.
• Dale Seymour and Jill Britton, Introduction to Tessellations, 1989, ISBN 978-0866514613, pp. 50–57

Euclidean and general tiling links:

• n-uniform tilings, Brian Galebach
• Dutch, Steve. "Uniform Tilings". Archived from the original on 2006-09-09. Retrieved 2006-09-09.
• Mitchell, K. "Semi-Regular Tilings". Retrieved 2006-09-09.
• Weisstein, Eric W. "Tessellation". MathWorld.
• Weisstein, Eric W. "Semiregular tessellation". MathWorld.
• Weisstein, Eric W. "Demiregular tessellation". MathWorld.