Phosphorus tribromide

Phosphorus tribromide is a colourless liquid with the formula PBr3. The liquid fumes in moist air due to hydrolysis and has a penetrating odour. It is used in the laboratory for the conversion of alcohols to alkyl bromides.

Phosphorus tribromide
Names
IUPAC name
Phosphorus tribromide
Other names
phosphorus(III) bromide,
phosphorous bromide,
tribromophosphine
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.029.253
EC Number
  • 232-178-2
RTECS number
  • TH4460000
UNII
Properties
PBr3
Molar mass 270.69 g/mol
Appearance clear, colourless liquid
Density 2.852 g/cm3
Melting point −41.5 °C (−42.7 °F; 231.7 K)
Boiling point 173.2 °C (343.8 °F; 446.3 K)
rapid hydrolysis
1.697
Viscosity 0.001302 Pas
Structure
trigonal pyramidal
Hazards
Safety data sheet See: data page
C
R-phrases (outdated) R14, R34, R37
S-phrases (outdated) (S1/2), S26, S45
NFPA 704 (fire diamond)
Flammability code 0: Will not burn. E.g. waterHealth code 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasReactivity code 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorusSpecial hazard W: Reacts with water in an unusual or dangerous manner. E.g. sodium, sulfuric acid
0
3
2
Related compounds
Other anions
phosphorus trifluoride
phosphorus trichloride
phosphorus triiodide
Other cations
nitrogen tribromide
arsenic tribromide
antimony tribromide
Related compounds
phosphorus pentabromide
phosphorus oxybromide
Supplementary data page
Refractive index (n),
Dielectric constantr), etc.
Thermodynamic
data
Phase behaviour
solidliquidgas
UV, IR, NMR, MS
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Y verify (what is YN ?)
Infobox references

Preparation

PBr3 is prepared by treating red phosphorus with bromine. An excess of phosphorus is used in order to prevent formation of PBr5:[1][2]

2 P + 3 Br2 → 2 PBr3

Because the reaction is highly exothermic, it is often conducted in the presence of a diluent such as PBr3.

Reactions

Phosphorus tribromide, like PCl3 and PF3, has both properties of a Lewis base and a Lewis acid. For example, with a Lewis acid such as boron tribromide it forms stable 1 :1 adducts such as Br3B · PBr3. At the same time PBr3 can react as an electrophile or Lewis acid in many of its reactions, for example with amines.

The most important reaction of PBr3 is with alcohols, where it replaces an OH group with a bromine atom to produce an alkyl bromide. All three bromides can be transferred.

PBr3 + 3 ROH → 3 RBr + HP(O)(OH)2

The mechanism (shown for a primary alcohol) involves formation of a phosphorus ester (to form a good leaving group), followed by an SN2 substitution.

Because of the SN2 substitution step, the reaction generally works well for primary and secondary alcohols, but fails for tertiary alcohols. If the reacting carbon centre is chiral, the reaction usually occurs with inversion of configuration at the alcohol alpha carbon, as is usual with an SN2 reaction.

In a similar reaction, PBr3 also converts carboxylic acids to acyl bromides.

PBr3 + 3 RCOOH → 3 RCOBr + HP(O)(OH)2

Applications

The main use for phosphorus tribromide is for conversion of primary or secondary alcohols to alkyl bromides,[3] as described above. PBr3 usually gives higher yields than hydrobromic acid, and it avoids problems of carbocation rearrangement- for example even neopentyl bromide can be made from the alcohol in 60% yield.[4]

Another use for PBr3 is as a catalyst for the α-bromination of carboxylic acids. Although acyl bromides are rarely made in comparison with acyl chlorides, they are used as intermediates in Hell-Volhard-Zelinsky halogenation.[5] Initially PBr3 reacts with the carboxylic acid to form the acyl bromide, which is more reactive towards bromination. The overall process can be represented as

On a commercial scale, phosphorus tribromide is used in the manufacture of pharmaceuticals such as alprazolam, methohexital and fenoprofen. It is also a potent fire suppression agent marketed under the name PhostrEx.

Precautions

PBr3 evolves corrosive HBr, is toxic, and reacts violently with water and alcohols.

PBr3 + 3 H2O → H3PO3 + 3 HBr

In reactions that produce phosphorous acid as a by-product, when working up by distillation be aware that this can decompose above about 160 °C to give phosphine which can cause explosions in contact with air.[3]

References

  1. J. F. Gay, R. N. Maxson "Phosphorus(III) Bromide" Inorganic Syntheses, 1947, vol. 2, 147ff. doi:10.1002/9780470132333.ch43
  2. Burton, T. M.; Degerping, E. F. (1940). "The Preparation of Acetyl Bromide". Journal of the American Chemical Society. 62 (1): 227. doi:10.1021/ja01858a502.
  3. Harrison, G. C.; Diehl, H. (1955). "β-Ethoxyethyl Bromide". Organic Syntheses.; Collective Volume, 3, p. 370
  4. Wade, L. G. Jr. (2005). Organic Chemistry (6th ed.). Upper Saddle River, NJ, USA: Pearson/Prentice Hall. p. 477.
  5. Wade, L. G. Jr. (2005). Organic Chemistry (6th ed.). Upper Saddle River, NJ, USA: Pearson/Prentice Hall. p. 1051.

Further reading

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.