Radeon HD 2000 series

The Unified Video Decoder (UVD) SIP core is on-die in the HD 2400 and the HD 2600. The HD 2900 GPU dies do not have a UVD core, as its stream processors were powerful enough to handle most of the steps of video acceleration in its stead except for entropy decoding and bitstream processing which are left for the CPU to perform.[4]

HDTV encoding support is implemented via the integrated AMD Xilleon encoder; the companion Rage Theater chip used on the Radeon X1000 series was replaced with the digital Theater 200 chip, providing VIVO capabilities.

For display outputs, all variants include two dual-link TMDS transmitters, except for HD 2400 and HD 3400, which include one single and one dual-link TMDS transmitters. Each DVI output includes dual-link HDCP encoder with on-chip decipher key. HDMI was introduced, supporting display resolutions up to 1,920×1,080, with integrated HD audio controller with 5.1-channel LPCM and AC3 encoding support. Audio is transmitted via DVI port, with specially designed DVI-to-HDMI dongle for HDMI output that carries both audio and video.[5]

All variants support CrossFireX technology. CrossFire efficiency was improved and shows performance approaching the theoretical maximum of twice the performance of a single card.[6][7]

ATI Radeon HD 2400 XT

The Radeon HD 2400 series was based on the codenamed RV610 GPU. It had 180 million transistors on a 65 nm fabrication process. The Radeon HD 2400 series used a 64-bit-wide memory bus.[9] The die size is 85 mm².[10] The official PCB design implements only a passive-cooling heatsink instead of a fan, and official claims of power consumption are as little as 35 W. The core has 16 kiB unified vertex/texture cache away from dedicated vertex cache and L1/L2 texture cache used in higher end model.

Reports has that the first batch of the RV610 core (silicon revision A12), only being released to system builders, has a bug that hindered the UVD from working properly, but other parts of the die operated normally. Those products were officially supported with the release of Catalyst 7.10 driver, which the cards were named as Radeon HD 2350 series.[11]

Several reports from owners of HD 2400 Pro suggest the card do not fully support hardware decoding for all H.264/VC-1 videos. The device driver, even with the latest stable version, seem to only honor hardware decoding for formats specified in the Blu-ray and HD-DVD specification. As a result of such restriction, the card is not deemed very useful for hardware video decoding since the majority of the H.264/VC-1 videos on the net are not encoded in those formats (even though the hardware itself is fully capable of doing such decoding work). This device driver restriction has led to the development of a third party driver patch, "ExDeus ATI HD Registry Tweak", to unlock the potential of HD 2400 Pro for full support of H.264/VC-1 hardware video decoding.[12][13][14]

The Radeon HD 2600 series was based on the codenamed RV630 GPU and packed 390 million transistors on a 65 nm fabrication process. The Radeon HD 2600-series video cards included GDDR3 support, a 128-bit memory ring bus and 4-phase digital PWM,[9] spanning a die size of 153 mm².[15] Neither of the GDDR3 reference PCI-E designs required additional power connectors whereas the HD 2600 Pro and XT AGP variants required additional power through either 4-pin or 6-pin power connectors,[16] Official claims state that the Radeon HD 2600 series consumes as little as 45 W of power.

The Radeon HD 2600 X2 is a dual-GPU product which includes 2 RV630 dies on a single PCB with a PCI-E bridge splitting the PCI-E ×16 bandwidth into two groups of PCI-E ×8 lanes (each 2.0 Gbit/s). The card provides 4 DVI outputs or HDMI outputs via dongle and supports CrossFire configurations. AMD calls this product the Radeon HD 2600 X2 as seen by some vendors and as observed inside the INF file of Catalyst 7.9 version 8.411. Sapphire and other vendors including PowerColor and GeCube have either announced or demonstrated their respective dual GPU (connected by crossfire) products.[17] Catalyst 7.9 added support for this hardware in September 2007. However, AMD did not provide much publicity to promote it. A vendor may offer cards containing 256 MiB, 512 MiB, or 1 GiB of video memory. Although the memory technology utilized is at a vendor's discretion, most vendors have opted for GDDR3 and DDR2 due to lower manufacturing cost and positioning of this product for the mainstream rather than performance market segment and also a big success.

The Radeon HD 2900 series was based on the codenamed R600 GPU and was launched on May 14, 2007. R600 packed 700 million transistors on an 80 nm fabrication process and had a 420 mm² die size.[18] The Radeon HD 2900 XT was launched with 320 Stream Processors and a core clock of 743 MHz. The initial model was released with 512 MB of GDDR3 clocked at 828 MHz (1,656 MHz effective) with a 512-bit interface. A couple months after release ATI released the 1 GB GDDR4 model with a memory frequency of 1,000 MHz (2,000 MHz effective). Performance was on par compared to the 512 MB card. The HD 2900 XT introduced a lot of firsts. It was the first to implement a digital PWM on board (7-phase PWM), first to use an 8-pin PEG connector, and was the first graphics card from ATI to support DirectX 10.

The Radeon HD 2900 Pro was clocked lower at 600 MHz core and 800 MHz memory (1,600 MHz effective), configured with 512 MB of GDDR3 or 1 GB of GDDR4. It was rumored that some of the 1 GB GDDR4 models were manufactured using a 12" cooler borrowed from the prototype HD 2900 XTX.[19] The HD 2900 Pro had both 256-bit and 512-bit interface options for the 512 MB versions of the card. A few AIB partners offered a black and silver cooler exclusive to the 256-bit model of the Pro.[20][21]

The Radeon HD 2900 GT was a 240 Stream Processor variant clocked the same as the HD 2900 Pro, but with 256 MB of video memory on a 256-bit interface.

AMD Catalyst is being developed for Microsoft Windows and Linux. As of July 2014, other operating system are not officially supported. This may be different for the AMD FirePro brand, which is based on identical hardware but features OpenGL-certified graphics device drivers.

AMD Catalyst supports of course all features advertised for the Radeon brand.

The Purple Pill tool issue, which could allow unsigned drivers to be loaded into Windows Vista and tamper with the operating system kernel,[33] was resolved in the Catalyst 7.8 release (version 8.401).[34] The AVIVO video converter for Windows Vista, and color temperature control in Catalyst Control Center was added with the release of Catalyst 7.9, package version 8.411. Software CrossFire was enabled for HD 2600 and HD 2400 series video cards with the release of Catalyst 7.10 (package version 8.421)

The Catalyst 8.1, package version 8.451, supports for MultiView technology for accelerated OpenGL rendering on multiple video card setup (CrossFire). The driver also allows CrossFire configurations for Radeon HD 3850 and HD 3870 video cards.[35][36]

The Catalyst 8.3 is described by AMD as a milestone release,[37] supporting DirectX 10.1, ATI CrossFire X technology and allowing the mixing of different Radeon HD 3800 series video cards to form a CrossFire X setup with 2 to 4 GPUs. Catalyst 8.3 introduced to new video controls to further enhance the video playback quality, these controls includes edge enhancement and noise reduction settings. There is also the support for extended desktop in CrossFire X mode. The anti-aliasing support for Unreal Engine 3.0 in DirectX 9.0 games, support for CFAA filters (wide tent and box tent) to be enabled when Super AA is enabled, and other features as developer support for hardware surface tessellation, hardware accelerated wide aspect ratio LCD scaling, HydraVision support for Windows Vista allowing to add maximum 9 virtual desktops and new Folding@home client are also officially supported in this release.

The Catalyst 8.5, package version 8.493[38] brought new features include component video with 480i and 480p resolutions, SECAM TV output support, 1080p HDTV custom mode via HDMI, 1080p24 (1080p resolution at 24 Hz) support, HDMI Audio for non-standard TV modes (CEA 861b), support for adaptive anti-aliasing (and later, in Catalyst 8.6, also support for custom filters [39]) under OpenGL, Windows XP SP3 support and un-install utility enhancements. The driver also includes performance improvements and fixes some instability issues and rendering issues on some games.

The Radeon HD 2000 series has been transitioned to legacy support, where drivers will be updated only to fix bugs instead of being optimized for new applications.[40]

Current Catalyst drivers do not support the AGP versions of Radeon HD 2000/3000 series cards with RIALTO bridge. Installing Catalyst drivers on those cards will yield the following error message: "setup did not find a driver compatible with your current hardware or operating system." or simply fail outright. The AGP cards in question are supported unofficially by ATI/AMD with a hot-fixed Catalyst driver-set each month since May 2008 with the Catalyst 8.5 hotfix.[41] Their PCI vendor IDs are listed below:[42]

The free and open-source drivers are primarily developed on Linux and for Linux, but have been ported to other operating systems as well. Each driver is composed out of five parts:

1. Linux kernel component Direct Rendering Manager (DRM)
2. Linux kernel component KMS driver: basically the device driver for the display controller
3. user-space component libDRM
4. user-space component in Mesa 3D;
5. a special and distinct 2D graphics device driver for X.Org Server, which if finally about to be replaced by Glamor

The free and open-source "Radeon" graphics driver supports most of the features implemented into the Radeon line of GPUs.[43]

The free and open-source "Radeon" graphics device drivers are not reverse engineered, but based on documentation released by AMD.[44]

Initial register documentation and parser code to execute the AtomBIOS ROM routines were released in September 2007. The R600 family Instruction Set Architecture guide was released on June 11, 2008.[45] Sample code and register headers for the R600 and R700 3D engines were released in December 2008. AMD released the specifications for both the r6xx and r7xx families on January 26, 2009.[46]