Spokane, Portland and Seattle 700

700 was delivered on June 21, 1938, joining the 702 pulling overnight passenger trains between Spokane and Vancouver, Washington, along the north shore of the Columbia River, with the 701 providing backup and pulling freight. Owing to an undersized turntable, the Northerns didn't reach Portland, Oregon, until 1944.

By 1947, the Great Northern Railway had begun to streamline its premier passenger train, The Empire Builder, and had started adding diesels to the locomotive mix. SP&S also started purchasing diesels at this time, but they arrived after the streamlined cars were brought into service and for a few months, the 700s pulled the Portland section of Great Northern's Empire Builder and Northern Pacific's North Coast Limited.

In 1947, the 700 suffered a catastrophic derailment and fell on her side while pulling a passenger train in Washington.[4] It is unknown if the engineer, fireman, or leading brakeman were injured or killed.

Through the late 1940s and early 1950s, the E-1s continued to pull secondary passenger trains, but by 1954, the diesels had completely replaced steam for passenger service and the E-1s were relegated to pulling freight trains until 1955.

Finally, on May 20, 1956, a spruced-up 700, with its normally grey smokebox painted silver, pulled its last passenger train. The Farewell To Steam run had a total of 21 cars carrying 1,400 passengers from Portland, Oregon, to Wishram, Washington, in the heart of the Columbia Gorge, and back again.

After the trip, the 700, 701, 702, Challengers and other SP&S locomotives were sent to the scrap line. At the same time, however, Union Pacific Railroad was offering to donate a steam locomotive to the city of Portland, Oregon, and not to be outdone, the SP&S offered the 700. The two locomotives (SP&S 700 and OR&N 197) were moved into Oaks Park along the Willamette River in 1958 and were soon joined by SP 4449 where they sat for nearly 20 years.[5]

In 1978, No. 700 was still on long-term static display at Oaks Park.

For nearly 20 years the 700, along with the other two locomotives, sat behind chain link fences, slowly fading and rusting away. Only the attention of a single Southern Pacific Railroad employee, Jack Holst, saved the locomotives from complete uselessness. Mr. Holst regularly visited the locomotives and kept the bearings and rods well greased and oiled. Unfortunately, Mr. Holst died in 1972, before the first locomotive, SP 4449, was removed from Oaks Park and restored. In 1975, 15-year-old Chris McLarney started working on the 700, cleaning and oiling various parts. He founded the PRPA (Pacific Railroad Preservation Association) in 1977 to provide support for the preservation work.[2]

Between 1987 and 1989, the SP&S 700 was moved from Oaks Park to the Southern Pacific's Brooklyn Roundhouse, in southeast Portland, for the continuation of restoration work.[2] With the support of many individuals and the Burlington Northern Railroad, No. 700 returned to operation on May 15, 1990.[6]

Although it's the third largest steam locomotive still in operation and expensive to run and insure, the 700 has managed a number of excursions since its restoration on May 15, 1990, including an historic double header with SP 4449 from Portland, Oregon, to Wishram, Washington, and back during the 2005 National Railway Historical Society national convention, and a 2002 "Steam across Montana" from Sandpoint, Idaho, to Billings, Montana, and back.[7][8] It also was disguised as Northern Pacific #2668, as the SP&S E-1 design is identical to the NP A-3 class, other than the SP&S' Northerns burned oil, while the NP's burned coal.

The 700 was added to the National Register of Historic Places on January 25, 2006, as the Spokane, Portland and Seattle Railway Steam Locomotive.[9][10]

SP&S 700 on public view at its new home, the Oregon Rail Heritage Center, in 2013

Until June 2012, the 700 and its two companions resided at the Brooklyn Roundhouse. The City of Portland was leasing the roundhouse from its owner, Union Pacific Railroad (UP), but after the railroad announced plans to demolish the roundhouse to allow expansion of the yard, the engines needed to find a new home. The Oregon Rail Heritage Foundation, with significant support from the City of Portland, raised funds for a new restoration and visitor center adjacent to the Oregon Museum of Science and Industry, to provide the city's steam locomotives with a permanent and publicly accessible home before the closure of the roundhouse.[11]

Construction of the new Oregon Rail Heritage Center began in October 2011[12] and the 700 and the other two locomotives were moved to the site of the new enginehouse and heritage center on June 26, 2012.[3] They were moved indoors on July 28, once the enginehouse was enclosed. The ORHC opened to the public on September 22, 2012.[13] Maintenance of the 700 continues to be carried out by the Pacific Railroad Preservation Association and a team of volunteers.[14][15] The locomotive was taken out of service in late 2015 for its 1,472-day inspection, as mandated by the Federal Railroad Administration (FRA). Since then, dedicated volunteers have been working steadily to inspect, repair and reassemble the locomotive. In August 2020, Emery Trust awarded a grant of $35,000 to help complete No. 700's rebuild and the locomotive may be in operation again in 2021.

• Southern Pacific 4449
• Oregon Railroad & Navigation 197
• Oregon Rail Heritage Foundation

• Wood, Charles & Dorothy (1974). Spokane, Portland and Seattle Ry. Superior Publishing Company. ISBN 0-87564-703-0.
• Prager, Kenny (1999). That Reminds Me of Another Story: Stories of the SP&S Railway. Self Published.

Wikimedia Commons has media related to Spokane, Portland and Seattle 700.

• All aboard the SP&S 700
• The Pacific Railroad Preservation Association
• SP&S 700
• Pacific Northwest Chapter of the National Railway Historical Society
• Oregon Railway Heritage Foundation
• N Scale Kitbash/Scratchbuild of SP&S #700