Dielectric resonator antenna

A dielectric resonator antenna (DRA) is a radio antenna mostly used at microwave frequencies and higher, that consists of a block of ceramic material of various shapes, the dielectric resonator, mounted on a metal surface, a ground plane. Radio waves are introduced into the inside of the resonator material from the transmitter circuit and bounce back and forth between the resonator walls, forming standing waves. The walls of the resonator are partially transparent to radio waves, allowing the radio power to radiate into space.[1]

An advantage of dielectric resonator antennas is they lack metal parts, which become lossy at high frequencies, dissipating energy. So these antennas can have lower losses and be more efficient than metal antennas at high microwave and millimeter wave frequencies.[1] Dielectric waveguide antennas are used in some compact portable wireless devices, and military millimeter-wave radar equipment. The antenna was first proposed by Robert Richtmyer in 1939.[2] In 1982, Long et al. did the first design and test of dielectric resonator antennas considering a leaky waveguide model assuming magnetic conductor model of the dielectric surface .[3] In that very first investigation, Long et al. explored HEM11d mode in a cylindrical shaped ceramic block to radiate broadside. After three decades, yet another mode (HEM12d) bearing identical broadside pattern has been introduced by Guha in 2012.[4]

An antenna like effect is achieved by periodic swing of electrons from its capacitive element to the ground plane which behaves like an inductor. The authors further argued that the operation of a dielectric antenna resembles the antenna conceived by Marconi, the only difference is that inductive element is replaced by the dielectric material.[5]

Features

Dielectric resonator antennas offer the following attractive features:

  • The dimension of a DRA is of the order of , where is the free-space wavelength and is the dielectric constant of the resonator material. Thus, by choosing a high value of (), the size of the DRA can be significantly reduced.
  • There is no inherent conductor loss in dielectric resonators. This leads to high radiation efficiency of the antenna. This feature is especially attractive for millimeter (mm)-wave antennas, where the loss in metal fabricated antennas can be high.
  • DRAs offer simple coupling schemes to nearly all transmission lines used at microwave and mm-wave frequencies. This makes them suitable for integration into different planar technologies. The coupling between a DRA and the planar transmission line can be easily controlled by varying the position of the DRA with respect to the line. The performance of DRA can therefore be easily optimized experimentally.
  • The operating bandwidth of a DRA can be varied over a wide range by suitably choosing resonator parameters. For example, the bandwidth of the lower order modes of a DRA can be easily varied from a fraction of a percent to about 20% or more by the suitable choice of the dielectric constant of the material and/or by strategic shaping of the DRA element.
  • Use of multiple modes radiating identically has also been successfully addressed. One such example is hybrid combination of dielectric ring-resonator and electric monopole which was initially explored by Lapierre.[6] Multiple identical monopole-type modes in an annular shaped dielectric ring-resonator were theoretically analyzed by Guha to show their unique combinations with that due to a traditional electric monopole resulting in UWB antennas. [7]
  • Each mode of a DRA has a unique internal and associated external field distribution. Therefore, different radiation characteristics can be obtained by exciting different modes of a DRA.
  • Differently radiating modes have also been employed to generate identical radiation patterns using composite geometries, with a special feature of wider bandwidth.[8][9]

See also

References
  • R. K. Mongia; P. Bhartia (1994). "Dielectric Resonator Antennas – A Review and General Design Relations for Resonant Frequency and Bandwidth International Journal of Microwave and Millimeter-Wave Computer-Aided Engineering". 4 (3): 230–247. doi:10.1002/mmce.4570040304. Archived from the original on 2012-12-16. Cite journal requires |journal= (help)
  • Antenova Antenova info.

Notes
  1. Huang, Kao-Cheng; David J. Edwards (2008). Millimetre wave antennas for gigabit wireless communications: a practical guide to design and analysis in a system context. USA: John Wiley & Sons. pp. 115–121. ISBN 0-470-51598-8.
  2. Richtmeyer, Robert (1939), "Dielectric Resonators", Journal of Applied Physics, 10: 391, doi:10.1063/1.1707320
  3. Long, S.; McAllister, M.; Shen, L. (1983), "The Resonant Cylindrical Dielectric Resonator Antenna", IEEE Transactions on Antennas and Propagation, 31: 406–412, doi:10.1109/tap.1983.1143080
  4. Guha, D.; et, al. (2012), "Higher Order Mode for High Gain Broadside Radiation from Cylindrical Dielectric Resonator Antennas", IEEE Transactions on Antennas and Propagation, 60: 71–77, doi:10.1109/TAP.2011.2167922
  5. "New Theory Leads to Gigahertz Antenna on Chip". Retrieved 19 April 2015.
  6. Lapierre, M.; et, al. (2005), "Ultra wideband monopole/dielectric resonator antenna", IEEE Microwave and Wireless Components Letters, 15: 7–9, doi:10.1109/LMWC.2004.840952
  7. Guha, D.; et, al. (2006), "Improved design guidelines for the ultra wideband monopole-dielectric resonator antenna", IEEE Antennas and Wireless Propagation Letters, 5: 373–376, doi:10.1109/LAWP.2006.881922
  8. Guha, D.; Antar, Y. (2006), "Four-element cylindrical dielectric resonator antenna for wideband monopole-like radiation", IEEE Transactions on Antennas and Propagation, 54: 2657–2662, doi:10.1109/TAP.2006.880766
  9. Guha, D.; Antar, Y. (2006), "New half-hemispherical dielectric resonator antenna for broadband monopole-type radiation", IEEE Transactions on Antennas and Propagation, 54: 3621–3628, doi:10.1109/TAP.2006.886547
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.