Ware River

The Ware River is a 35.4-mile-long (57.0 km)[1] river in central Massachusetts. It has two forks, the both of which (the west and the east branch) begin in Hubbardston, Massachusetts. The Ware River flows southwest through the middle of the state, joins the Quaboag River at Three Rivers, Massachusetts, to form the Chicopee River on its way to the Connecticut River.

This article is about the river in Massachusetts. For the river in Virginia, see Ware River (Virginia).
Ware River
The Ware-Gilbertville Covered Bridge spans two towns, Ware and Hardwick, and two counties in MA.
Physical characteristics
Source 
 • locationHubbardston
 • coordinates42.472°N 71.999°W / 42.472; -71.999
 • elevation830 feet (250 m)
Mouth 
 • location
Three Rivers
 • coordinates
42.1807°N 72.3654°W / 42.1807; -72.3654
 • elevation
290 feet (88 m)
Length35.4 miles (57.0 km)
Basin size96 square miles (250 km2)
Discharge 
 • average95 cu ft/s (2.7 m3/s)

The Brigham Pond Dam, forming a pond of the same name, first impounds the West Branch of the Ware River in Hubbardston. The East Branch of the River originates from Bickford Pond in Hubbardston, near the adjoining town of Princeton. Much of Hubbardston lies within the Ware River watershed and feeds tributaries of the Ware and Millers rivers, the Millers River running generally west, and the Ware River running generally southwest. The Ware River is part of the Massachusetts Water Resources Authority drinking water system serving the greater Boston area. There is also a flood control dam on the Ware River in Hubbardston and Barre. This dam was constructed by and is maintained by the US Army Corps of Engineers. Large sections of the Ware River Watershed are owned and/or maintained by the Massachusetts Department of Conservation and Recreation including 22,000 acres in the vicinity of the dam.

History

The river was named for early fish weirs (locally pronounced). In 1928 the building of a 12.5-mile-long (20.1 km) aqueduct connecting the Ware River to the Wachusett Reservoir commenced a major public works undertaking. The 12-foot-wide (3.7 m) massive horseshoe-shaped conduit, known as the Wachusett-Coldbrook Tunnel, had to be blasted through solid rock at a depth of 200 feet (60 m). The arrival in 1931 of the first water from the Ware River by way of this tunnel probably saved the Wachusett Reservoir from drying up, for a prolonged drought had reduced Wachusett’s water supply to less than 20 percent of capacity.

In 1933 the Quabbin Aqueduct was completed, ready to transport water from the Quabbin Reservoir under construction. The Swift River Diversion tunnel is in full use, bypassing water around the dam area.

Topography

The Ware River starts at an elevation of about 830 feet (250 m) above sea level, fed from the numerous small streams within its watershed, before ending at the village of Three Rivers at an elevation of about 290 feet (88 m). The river flows through many historic mill towns where its fall towards the sea provided power. One of the largest such towns is Ware, Massachusetts, which shares its name. This river is part of the Connecticut River Watershed.

Towns along the river

Significant structures
Barre Falls Dam north of Barre

Barre Falls Dam

The Barre Falls Dam is located on the Ware River in Hubbardston, Massachusetts, about 0.3 miles (0.5 km) below the junction of the river's east and west branches and 13 miles (21 km) northwest of Worcester. Designed and constructed by the United States Army Corps of Engineers, this dam substantially reduces flooding along the Ware, Chicopee, and Connecticut rivers. Construction of the project began in May 1956 with completion in July 1958 at a cost of $2 million.

The project consists of an earth fill dam with stone slope protection 885 feet (270 m) long and 69 feet (21 m) high. There are three dikes totaling 3,215 feet (980 m) in length, with a maximum elevation of 48 feet (15 m). Cut in rock, the spillway comprises a concrete weir 60 feet (18 m) in length. The weir's crest elevation is 23 feet (7.0 m) lower than the top of the dam. There is no lake at the Barre Falls Dam. The flood storage area for the project, which is normally empty, stores floodwaters and covers about 1,500 acres (6.1 km2) in the towns of Barre, Hubbardston, Rutland, and Oakham. The entire project, including all associated lands, covers 2,407 acres (9.74 km2). The Barre Falls Dam can store up to 7.82 billion US gallons (29,600,000 m3) of water for flood control purposes. This is equivalent to 8.2 inches (21 cm) of water covering its drainage area of 55 square miles (140 km2).

The Barre Falls reservoir is located within the Upper Ware River Watershed. The Massachusetts Department of Conservation and Recreation (MDCR) manages and preserves the land for water quality protection. The Massachusetts Water Resources Authority (MWRA) manages these water resources, which are part of the public water supply for the metropolitan Boston area.

Ware River Diversion

The Ware River Diversion facility feeds Ware River water into the Quabbin Aqueduct. This is used to start a natural siphon so water can flow from the Quabbin to the Wachusett Reservoir, or from Wachusett Reservoir to the Quabbin Reservoir.

See also

References
  1. U.S. Geological Survey. National Hydrography Dataset high-resolution flowline data. The National Map, accessed April 1, 2011
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.