Pnictogen

Like other groups, the members of this family show similar patterns in electron configuration, especially in the outermost shells, resulting in trends in chemical behavior.

This group has the defining characteristic that all the component elements have 5 electrons in their outermost shell, that is 2 electrons in the s subshell and 3 unpaired electrons in the p subshell. They are therefore 3 electrons short of filling their outermost electron shell in their non-ionized state. The Russell–Saunders term symbol of the ground state in all elements in the group is ⁴S_​³⁄2.

The most important elements of this group are nitrogen (N), which in its diatomic form is the principal component of air, and phosphorus (P), which, like nitrogen, is essential to all known forms of life.

Binary compounds of the group can be referred to collectively as pnictides. Pnictide compounds tend to be exotic. Various properties that some pnictides have include being diamagnetic and paramagnetic at room temperature, being transparent, and generating electricity when heated. Other pnictides include the ternary rare-earth main-group variety of pnictides. These are in the form of RE_aM_bPn_c, where M is a carbon group or boron group element and Pn is any pnictogen except nitrogen. These compounds are between ionic and covalent compounds and thus have unusual bonding properties.[4]

These elements are also noted for their stability in compounds due to their tendency for forming double and triple covalent bonds. This is the property of these elements which leads to their potential toxicity, most evident in phosphorus, arsenic and antimony. When these substances react with various chemicals of the body, they create strong free radicals not easily processed by the liver, where they accumulate. Paradoxically, it is this strong bonding which causes nitrogen and bismuth's reduced toxicity (when in molecules), as these form strong bonds with other atoms which are difficult to split, creating very unreactive molecules. For example, N₂, the diatomic form of nitrogen, is used as an inert gas in situations where using argon or another noble gas would be too expensive.

Formation of multiple bonds is facilitated by their five valence electrons whereas the octet rule permits a pnictogen for accepting three electrons on covalent bonding. Because 5 > 3, it leaves unused two electrons in a lone pair unless there is a positive charge around (like in NH+
4). When a pnictogen forms only three single bonds, effects of the lone pair typically result in trigonal pyramidal molecular geometry.

The light pnictogens (nitrogen, phosphorus, and arsenic) tend to form −3 charges when reduced, completing their octet. When oxidized or ionized, pnictogens typically take an oxidation state of +3 (by losing all three p-shell electrons in the valence shell) or +5 (by losing all three p-shell and both s-shell electrons in the valence shell). However heavier pnictogens are more likely to form the +3 oxidation state than lighter ones due to the s-shell electrons becoming more stabilized.[5]

Pnictogens can react with hydrogen to form pnictogen hydrides such as ammonia. Going down the group, to phosphane (phosphine), arsane (arsine), stibane (stibine), and finally bismuthane (bismuthine), each pnictogen hydride becomes progressively less stable/more unstable, more toxic, and has a smaller hydrogen-hydrogen angle (from 107.8° in ammonia[6] to 90.48° in bismuthane).[7] (Also, technically, only ammonia and phosphane have the pnictogen in the −3 oxidation state because, for the rest, the pnictogen is less electronegative than hydrogen.)

Crystal solids featuring pnictogens fully reduced include yttrium nitride, calcium phosphide, sodium arsenide, indium antimonide, and even double salts like aluminum gallium indium phosphide. These include III-V semiconductors, including gallium arsenide, the second-most widely-used semiconductor after silicon.

Nitrogen forms a limited number of stable III compounds. Nitrogen(III) oxide can only be isolated at low temperatures, and nitrous acid is unstable. Nitrogen trifluoride is the only stable nitrogen trihalide, with nitrogen trichloride, nitrogen tribromide and nitrogen triiodide being explosive—nitrogen triiodide being so shock-sensitive that the touch of a feather detonates it. Phosphorus forms a +III oxide which is stable at room temperature, phosphorous acid, and several trihalides, although the triiodide is unstable. Arsenic forms +III compounds with oxygen as arsenites, arsenous acid, and arsenic(III) oxide, and it forms all four trihalides. Antimony forms antimony(III) oxide and antimonite but not oxyacids. Its trihalides, antimony trifluoride, antimony trichloride, antimony tribromide, and antimony triiodide, like all pnictogen trihalides, each have trigonal pyramidal molecular geometry.

The +3 oxidation state is bismuth's most common oxidation state because its ability to form the +5 oxidation state is hindered by relativistic properties on heavier elements, effects that are even more pronounced concerning moscovium. Bismuth(III) forms an oxide, an oxychloride, an oxynitrate, and a sulfide. Moscovium(III) is predicted to behave similarly to bismuth(III). Moscovium is predicted to form all four trihalides, of which all but the trifluoride are predicted to be soluble in water. It is also predicted to form an oxychloride and oxybromide in the +III oxidation state.

For nitrogen, the +5 state is typically serves as only a formal explanation of molecules like N₂O₅, as the high electronegativity of nitrogen causes the electrons to be shared almost evenly. Pnictogen compounds with coordination number 5 are hypervalent. Nitrogen(V) fluoride is only theoretical and has not been synthesized. The "true" +5 state is more common for the essentially non-relativistic typical pnictogens phosphorus, arsenic, and antimony, as shown in their oxides, phosphorus(V) oxide, arsenic(V) oxide, and antimony(V) oxide, and their fluorides, phosphorus(V) fluoride, arsenic(V) fluoride, antimony(V) fluoride. At least two also form related fluoride-anions, hexafluorophosphate and hexafluoroantimonate, that function as non-coordinating anions. Phosphorus even forms mixed oxide-halides, known as oxyhalides, like phosphorus oxychloride, and mixed pentahalides, like phosphorus trifluorodichloride. Pentamethylpnictogen(V) compounds exist for arsenic, antimony, and bismuth. However, for bismuth, the +5 oxidation state becomes rare due to the relativistic stabilization of the 6s orbitals known as the inert pair effect, so that the 6s electrons are reluctant to bond chemically. This causes bismuth(V) oxide to be unstable[8] and bismuth(V) fluoride to be more reactive than the other pnictogen pentafluorides, making it an extremely powerful fluorinating agent.[9] This effect is even more pronounced for moscovium, prohibiting it from attaining a +5 oxidation state.

• Nitrogen forms a variety of compounds with oxygen in which the nitrogen can take on a variety of oxidation states, including +II, +IV, and even some mixed-valence compounds and very unstable +VI oxidation state.
• In hydrazine, diphosphane, and organic derivatives of the two, the nitrogen/phosphorus atoms have the −2 oxidation state. Likewise, diimide, which has two nitrogen atoms double-bonded to each other, and its organic derivatives have nitrogen in the oxidation state of −1.
  • Similarly, realgar has arsenic-arsenic bonds, so the arsenic's oxidation state is +II.
  • A corresponding compound for antimony is Sb₂(C₆H₅)₄, where the antimony's oxidation state is +II.
• Phosphorus has the +1 oxidation state in hypophosphorous acid and the +4 oxidation state in hypophosphoric acid.
• Antimony tetroxide is a mixed-valence compound, where half of the antimony atoms are in the +3 oxidation state, and the other half are in the +5 oxidation state.
• It is expected that moscovium will have an inert pair effect for both the 7s and the 7p_1/2 electrons, as the binding energy of the lone 7p_3/2 electron is noticeably lower than that of the 7p_1/2 electrons. This is predicted to cause +I to be a common oxidation state for moscovium, although it also occurs to a lesser extent for bismuth and nitrogen.[10]

The pnictogens consist of two non-metals (one gas, one solid), two metalloids, one metal, and one element with unknown chemical properties. All the elements in the group are solids at room temperature, except for nitrogen which is gaseous at room temperature. Nitrogen and bismuth, despite both being pnictogens, are very different in their physical properties. For instance, at STP nitrogen is a transparent non-metallic gas, while bismuth is a silvery-white metal.[11]

The densities of the pnictogens increase towards the heavier pnictogens. Nitrogen's density is 0.001251 g/cm³ at STP.[11] Phosphorus's density is 1.82 g/cm³ at STP, arsenic's is 5.72 g/cm³, antimony's is 6.68 g/cm³, and bismuth's is 9.79 g/cm³.[12]

Nitrogen's melting point is −210 °C and its boiling point is −196 °C. Phosphorus has a melting point of 44 °C and a boiling point of 280 °C. Arsenic is one of only two elements to sublimate at standard pressure; it does this at 603 °C. Antimony's melting point is 631 °C and its boiling point is 1587 °C. Bismuth's melting point is 271 °C and its boiling point is 1564 °C.[12]

Nitrogen's crystal structure is hexagonal. Phosphorus's crystal structure is cubic. Arsenic, antimony, and bismuth all have rhombohedral crystal structures.[12]

The term "pnictogen" (or "pnigogen") is derived from the Ancient Greek word πνίγειν (pnígein) meaning "to choke", referring to the choking or stifling property of nitrogen gas.[14] It can also be used as a mnemonic for the two most common members, P and N. The term "pnictogen" was suggested by the Dutch chemist Anton Eduard van Arkel in the early 1950s. It is also spelled "pnicogen" or "pnigogen". The term "pnicogen" is rarer than the term "pnictogen", and the ratio of academic research papers using "pnictogen" to those using "pnicogen" is 2.5 to 1.[4] It comes from the Greek root πνιγ- (choke, strangle), and thus the word "pnictogen" is also a reference to the Dutch and German names for nitrogen (stikstof and Stickstoffcode: deu promoted to code: de , respectively, "suffocating substance": i.e., substance in air, unsupportive of breathing). Hence, "pnictogen" could be translated as "suffocation maker". The word "pnictide" also comes from the same root.[14]

The name pentels (from Greek πέντε, pénte, five) also at one time stood for this group.[15]

Nitrogen can be produced by fractional distillation of air.[16]

The principal method for producing phosphorus is to reduce phosphates with carbon in an electric arc furnace.[17]

Most arsenic is prepared by heating the mineral arsenopyrite in the presence of air. This forms As₄O₆, from which arsenic can be extracted via carbon reduction. However, it is also possible to make metallic arsenic by heating arsenopyrite at 650 to 700 °C without oxygen.[18]

With sulfide ores, the method by which antimony is produced depends on the amount of antimony in the raw ore. If the ore contains 25% to 45% antimony by weight, then crude antimony is produced by smelting the ore in a blast furnace. If the ore contains 45% to 60% antimony by weight, antimony is obtained by heating the ore, also known as liquidation. Ores with more than 60% antimony by weight are chemically displaced with iron shavings from the molten ore, resulting in impure metal.

If an oxide ore of antimony contains less than 30% antimony by weight, the ore is reduced in a blast furnace. If the ore contains closer to 50% antimony by weight, the ore is instead reduced in a reverberatory furnace.

Antimony ores with mixed sulfides and oxides are smelted in a blast furnace.[19]

Bismuth minerals do occur, in particular in the form of sulfides and oxides, but it is more economic to produce bismuth as a by-product of the smelting of lead ores or, as in China, of tungsten and zinc ores.[20]

Moscovium is produced a few atoms at a time in particle accelerators by firing a beam of Calcium-48 ions at Americium until the nuclei fuse.[21]

Nitrogen gas is completely non-toxic, but breathing in pure nitrogen gas is deadly, because it causes nitrogen asphyxiation.[22] The build-up of nitrogen bubbles in the blood, such as those that may occur during scuba diving, can cause a condition known as the "bends" (decompression sickness). Many nitrogen compounds such as hydrogen cyanide and nitrogen-based explosives are also highly dangerous.[13]

White phosphorus, an allotrope of phosphorus, is toxic, with 1 mg per kg bodyweight being a lethal dose.[11] White phosphorus usually kills humans within a week of ingestion by attacking the liver. Breathing in phosphorus in its gaseous form can cause an industrial disease called "phossy jaw", which eats away the jawbone. White phosphorus is also highly flammable. Some organophosphorus compounds can fatally block certain enzymes in the human body.[13]

Elemental arsenic is toxic, as are many of its inorganic compounds; however some of its organic compounds can promote growth in chickens.[11] The lethal dose of arsenic for a typical adult is 200 mg and can cause diarrhea, vomiting, colic, dehydration, and coma. Death from arsenic poisoning typically occurs within a day.[13]

Antimony is mildly toxic.[22] Additionally, wine steeped in antimony containers can induce vomiting.[11] When taken in large doses, antimony causes vomiting in a victim, who then appears to recover before dying several days later. Antimony attaches itself to certain enzymes and is difficult to dislodge. Stibine, or SbH₃, is far more toxic than pure antimony.[13]

Bismuth itself is largely non-toxic, although consuming too much of it can damage the liver. Only one person has ever been reported to have died from bismuth poisoning.[13] However, consumption of soluble bismuth salts can turn a person's gums black.[11]

Moscovium is too unstable to conduct any toxicity chemistry.