Geneva Convention on Road Traffic

The Convention on Road Traffic, commonly known as the Geneva Convention on Road Traffic, is an international treaty promoting the development and safety of international road traffic by establishing certain uniform rules among the contracting parties. The convention addresses minimum mechanical and safety equipment needed to be on board and defines an identification mark to identify the origin of the vehicle. The Convention was prepared and opened for signature by the United Nations Conference on Road and Motor Transport held at Geneva from 23 August to 19 September 1949. It came into force on 26 March 1952.

Convention on Road Traffic
Participation in the Geneva Convention on Road Traffic
Signed19 September 1949
LocationGeneva
Effective26 March 1952
Signatories19
Parties
DepositaryUN Secretary-General
LanguagesEnglish and French
Geneva Convention on Road Traffic at Wikisource

There is a European Agreement supplementing the 1949 Convention on Road Traffic, in addition to the 1949 Protocol on Road Signs and Signals, concluded in Geneva on 16 September 1950.

Contracting parties

The Geneva Convention on Road Traffic was concluded in Geneva on 19 September 1949. The convention has been ratified by 101 countries. Since its entry into force on 26 March 1952, in signatory countries ("Contracting Parties") it replaces previous road traffic conventions, notably the 1926 International Convention relative to Motor Traffic and the International Convention relative to Road Traffic, and the Convention on the Regulation of Inter-American Automotive Traffic in accordance with Article 30 of the Convention.

Many of the contracting parties have also ratified the newer convention the Vienna Convention on Road Traffic of 1968. In signatory countries of the 1968 Vienna Convention, this replaces previous road traffic conventions including the Geneva Convention on Road Traffic, in accordance with Article 48 of the Vienna Convention.

Cross-border vehicles

Distinguishing sign of the State of registration. D denotes Deutschland (Germany).

One of the main benefits of the convention for motorists is the obligation on signatory countries to recognize the legality of vehicles from other signatory countries. The following requirements must be met when driving outside the country of registration:

  • Cars must display their registration number (vehicle registration plate) at the rear at least. Registration numbers must consist either of figures or of figures and letters. They must be displayed in capital Latin characters and Arabic numerals. In addition to this, the registration number may optionally be displayed in a different alphabet. Registration numbers can not consist of only letters; According to the current wording of paragraph 1 of Annex 3, a vehicle with the registration number with only letters would not be allowed in international traffic. This requirement was proposed amended in 2016.[2]
  • A distinguishing sign of the country of registration must be displayed on the rear of the vehicle. This sign must be placed separately from the registration plate. It may not be incorporated into the vehicle registration plate (such as the EU format license plates).
  • The physical requirements for the distinguishing sign are defined in Annex 4 of the Geneva Convention on Road Traffic, which states that the letters shall be in black on a white background having the shape of an ellipse with the major axis horizontal.
  • The vehicle must meet all technical requirements to be legal for road use in the country of registration. Any conflicting technical requirements (e.g., right-hand-drive or left-hand-drive) in the signatory country where the vehicle is being driven do not apply.
  • The driver must carry the vehicle's registration certificate, and if the vehicle is not registered in the name of an occupant of the vehicle (e.g., a hire car), proof of the driver's right to be in possession of the vehicle.
License plates with the distinguishing sign incorporated, such as the common EU format is not valid in countries that party only to the Geneva Convention on Road Traffic, unless they are members of the EU/EEA. It does however satisfy the requirements set out in the Vienna Convention on Road Traffic.

In practice, the requirement to display a distinguishing sign as defined in the Geneva Convention on Road Traffic is waived between some countries, for example within the European Economic Area, for vehicles with license plates in the common EU format (which incorporates the distinguishing sign into the license plate). This is also possible in countries party to the newer Vienna Convention on Road Traffic,[3] and between Canada, the United States, and Mexico (where the province, state, or district of registration is usually embossed or surface-printed on the vehicle registration plate).


International Driving Permit

The Geneva Convention on Road Traffic is one of three conventions that governs International Driving Permits. The other two are the 1926 Paris International Convention relative to Motor Traffic and the 1968 Vienna Convention on Road Traffic. When a state is contracting to more than one convention, the newest one terminate and replace previous ones in relation between those states.

The 1949 Convention's description of a driving permit and international driving permit are located in Annexes 9 and 10. The 1949 Geneva Convention states that an IDP remains valid for one year from the date of issue.

Licence classes according to the 1949 convention[4]
Class Description
A
Motor cycles, with or without a side-car, invalid carriages and three-wheeled motor vehicles with an unladen weight not exceeding 400 kg (900 lbs).
B
Motor vehicles used for the transport of passengers and comprising, in addition to the driver's seat, at most eight seats, or those used for the transport of goods and having a permissible maximum weight not exceeding 3,500 kg (7,700 lbs). Vehicles in this category may be coupled with a light trailer.
C
Motor vehicles used for the transport of goods and of which the permissible maximum weight exceeds 3,500 kg (7,700 lbs). Vehicles in this category may be coupled with a light trailer.
D
Motor vehicles used for the transport of passengers and comprising, in addition to the driver's seat, more than eight seats. Vehicles in this category may be coupled with a light trailer.
E
Motor vehicles of category B, C, or D, as authorized above, with other than light trailer.
  • "Permissible maximum weight" of a vehicle means the weight of the vehicle and its maximum load when the vehicle is ready for road.
  • "Maximum load" means the weight of the load declared permissible by the competent authority of the country(or jurisdiction) of registration of the vehicle.
  • "Light trailers" shall be those of permissible maximum weight not exceeding 750 kg (1,650 lbs).

See also

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.