Fludrocortisone

Fludrocortisone, sold under the brand name Florinef, among others, is a corticosteroid used to treat adrenogenital syndrome, postural hypotension, and adrenal insufficiency.[1][2][3] In adrenal insufficiency, it is generally taken together with hydrocortisone.[3] Fludrocortisone is taken by mouth[3] and is most commonly used in its acetate form.[4]

Fludrocortisone
Clinical data
Trade namesAstonin, Astonin-H, others
Other namesStC-1400; 9α-Fluorohydrocortisone; 9α-Fluorocortisol; 9α-Fluoro-17α-hydroxycorticosterone; 9α-Fluoro-11β,17α,21-trihydroxypregn-4-ene-3,20-dione
AHFS/Drugs.comMonograph
Pregnancy
category
  • C
Routes of
administration
By mouth
Drug classCorticosteroid; glucocorticoid; mineralocorticoid
ATC code
Legal status
Legal status
Pharmacokinetic data
Protein bindingHigh
MetabolismLiver
Elimination half-life3.5 hours
Identifiers
CAS Number
PubChem CID
IUPHAR/BPS
DrugBank
ChemSpider
UNII
KEGG
ChEBI
ChEMBL
CompTox Dashboard (EPA)
ECHA InfoCard100.004.395
Chemical and physical data
FormulaC21H29FO5
Molar mass380.456 g·mol−1
3D model (JSmol)
 NY (what is this?)  (verify)
Fludrocortisone acetate
Clinical data
Trade namesCortineff, Florinef, Florinefe, Fludrocortison, others
Other namesFluorohydrocortisone acetate; 9α-Fluorohydrocortisone 21-acetate; 9α-Fluoro-17α-hydroxycorticosterone 21-acetate; 9α-Fluoro-11β,17α,21-trihydroxypregn-4-ene-3,20-dione 21-acetate
Routes of
administration
By mouth
Drug classCorticosteroid; glucocorticoid; mineralocorticoid
Pharmacokinetic data
MetabolismLiver
Identifiers
CAS Number
PubChem CID
ChemSpider
UNII
CompTox Dashboard (EPA)
ECHA InfoCard100.004.395
Chemical and physical data
FormulaC23H31FO6
Molar mass422.493 g·mol−1
3D model (JSmol)
Melting point260 to 262 °C (500 to 504 °F) (dec.)

Common side effects of fludrocortisone include high blood pressure, swelling, heart failure, and low blood potassium.[3] Other serious side effects can include low immune system function, cataracts, muscle weakness, and mood changes.[3] It is not yet clear if use of fludrocortisone during pregnancy is safe for the fetus.[5] Fludrocortisone is mostly a mineralocorticoid; however, it also has glucocorticoid effects.[3]

Fludrocortisone was patented in 1953.[6] It is on the World Health Organization's List of Essential Medicines.[7]

Medical uses

Fludrocortisone has been used in the treatment of cerebral salt wasting syndrome.[8] It is used primarily to replace the missing hormone aldosterone in various forms of adrenal insufficiency such as Addison's disease and the classic salt wasting (21-hydroxylase deficiency) form of congenital adrenal hyperplasia. Due to its effects on increasing Na+ levels, and therefore blood volume, fludrocortisone is the first line of treatment for orthostatic intolerance and postural orthostatic tachycardia syndrome (POTS).[9] It can be used to treat low blood pressure.

Fludrocortisone is also a confirmation test for diagnosing Conn's syndrome (aldosterone producing-adrenal adenoma), the fludrocortisone suppression test. Loading the patient with fludrocortisone would suppress serum aldosterone level in a normal patient, whereas the level would remain elevated in a Conn's patient. The fludrocortisone suppression test is an alternative to the NaCl challenge (which would use normal saline or NaCl tablets).

Side effects

  • Sodium and water retention
  • Swelling due to fluid retention (edema)
  • High blood pressure (hypertension)
  • Headache
  • Low blood potassium level (hypokalemia)
  • Muscle weakness
  • Fatigue
  • Increased susceptibility to infection
  • Impaired wound healing
  • Increased sweating
  • Increased hair growth (hirsutism)
  • Thinning of skin and stretch marks
  • Disturbances of the gut such as indigestion (dyspepsia), distention of the abdomen and ulceration (peptic ulcer)
  • Decreased bone density and increased risk of fractures of the bones
  • Difficulty in sleeping (insomnia)
  • Depression
  • Weight gain
  • Raised blood sugar level
  • Changes to the menstrual cycle
  • Partial loss of vision due to opacity in the lens of the eye (cataracts)
  • Raised pressure in the eye (glaucoma)
  • Increased pressure in the skull (intracranial pressure)

Pharmacology

Fludrocortisone is a corticosteroid and acts as a powerful mineralocorticoid along with some additional but comparatively very weak glucocorticoid activity.[10] Relative to cortisol, it is said to have 10 times the glucocorticoid potency but 250 to 800 times the mineralocorticoid potency.[10][11] Fludrocortisone acetate is a prodrug of fludrocortisone, which is the active form of the drug.[12]

Plasma renin, sodium, and potassium is checked through blood tests in order to verify that the correct dosage is reached.

Chemistry

Fludrocortisone, also known as 9α-fluorocortisol (9α-fluorohydrocortisone) or as 9α-fluoro-11β,17α,21-trihydroxypregn-4-ene-3,20-dione, is a synthetic pregnane steroid and a halogenated derivative of cortisol (11β,17α,21-trihydroxypregn-4-ene-3,20-dione).[1][2] Specifically, it is a modification of cortisol with a fluorine atom substituted in place of one hydrogen atom at the C9α position.[1][2] Fluorine is a good bioisostere for hydrogen because it is similar in size, with the major difference being in its electronegativity. The acetate form of fludrocortisone, fludrocortisone acetate, is the C21 acetate ester of fludrocortisone,[1][2] and is hydrolyzed into fludrocortisone in the body.[12]

History

Fludrocortisone was described in the literature in 1953[13] and was introduced for medical use (as the acetate ester) in 1954.[11][14] It was the first synthetic corticosteroid to be marketed, and followed the introduction of cortisone in 1948 and hydrocortisone (cortisol) in 1951.[13][15] Fludrocortisone was also the first fluorine-containing pharmaceutical drug to be marketed.[16]

Society and culture

Generic name

Fludrocortisone is the generic name of fludrocortisone and its INN, USAN, BAN, DCF, and DCIT, whereas fludrocortisone acetate is the generic name of fludrocortisone acetate and its USP, BANM and JAN.[1][2][17]

Brand names

Fludrocortisone is marketed mainly under the brand names Astonin and Astonin-H, whereas the more widely used fludrocortisone acetate is sold mainly as Florinef but also under several other brand names including Cortineff, Florinefe, and Fludrocortison.[2][17]

Availability

Fludrocortisone is marketed in Austria, Croatia, Denmark, Germany, Luxembourg, Romania, and Spain, whereas fludrocortisone acetate is more widely available throughout the world and is marketed in the United States, Canada, the United Kingdom, various other European countries, Australia, Japan, China, Brazil, and many other countries.[2][17]

References

  1. J. Elks (14 November 2014). The Dictionary of Drugs: Chemical Data: Chemical Data, Structures and Bibliographies. Springer. pp. 558–. ISBN 978-1-4757-2085-3. Archived from the original on 5 November 2017.
  2. Index Nominum 2000: International Drug Directory. Taylor & Francis. 2000. pp. 450–. ISBN 978-3-88763-075-1. Archived from the original on 2017-11-05.
  3. "Fludrocortisone Acetate". The American Society of Health-System Pharmacists. Archived from the original on 5 July 2017. Retrieved 8 December 2016.
  4. Richard O. Day; Daniel E. Furst; Piet L.C.M. van Riel; Barry Bresnihan (30 May 2010). Antirheumatic Therapy: Actions and Outcomes. Springer Science & Business Media. pp. 21–. ISBN 978-3-7643-7726-7. Archived from the original on 5 November 2017.
  5. "Fludrocortisone Use During Pregnancy | Drugs.com". www.drugs.com. Archived from the original on 24 December 2016. Retrieved 24 December 2016.
  6. Fischer, Janos; Ganellin, C. Robin (2006). Analogue-based Drug Discovery. John Wiley & Sons. p. 484. ISBN 9783527607495. Archived from the original on 2017-11-05.
  7. World Health Organization (2019). World Health Organization model list of essential medicines: 21st list 2019. Geneva: World Health Organization. hdl:10665/325771. WHO/MVP/EMP/IAU/2019.06. License: CC BY-NC-SA 3.0 IGO.
  8. Taplin CE, Cowell CT, Silink M, Ambler GR (December 2006). "Fludrocortisone therapy in cerebral salt wasting". Pediatrics. 118 (6): e1904–8. doi:10.1542/peds.2006-0702. PMID 17101713. S2CID 28871495.
  9. Freitas J, Santos R, Azevedo E, Costa O, Carvalho M, Falcão de Freitas A (2000). "Clinical improvement in patients with orthostatic intolerance after treatment with bisoprolol and fludrocortisone". Clinical Autonomic Research. 10 (5): 293–299. doi:10.1007/BF02281112. PMID 11198485. S2CID 20843222.
  10. De Groot LJ, Chrousos G, Dungan K, Feingold KR, Grossman A, Hershman JM, Koch C, Korbonits M, McLachlan R, New M, Purnell J, Rebar R, Singer F, Vinik A, Chrousos, Pavlaki AN, Magiakou MA (2000). "Glucocorticoid Therapy and Adrenal Suppression". PMID 25905379. Cite journal requires |journal= (help)
  11. Thomas L. Lemke; David A. Williams (2008). Foye's Principles of Medicinal Chemistry. Lippincott Williams & Wilkins. pp. 890–. ISBN 978-0-7817-6879-5. Archived from the original on 2017-11-05.
  12. Polito A, Hamitouche N, Ribot M, Polito A, Laviolle B, Bellissant E, Annane D, Alvarez JC (2016). "Pharmacokinetics of oral fludrocortisone in septic shock". Br J Clin Pharmacol. 82 (6): 1509–1516. doi:10.1111/bcp.13065. PMC 5099539. PMID 27416887.
  13. CALVERT DN (1962). "Anti-inflammatory steroids". Wis. Med. J. 61: 403–4. PMID 13875857.
  14. William Andrew Publishing (22 October 2013). Pharmaceutical Manufacturing Encyclopedia, 3rd Edition. Elsevier. pp. 1642–. ISBN 978-0-8155-1856-3. Archived from the original on 5 November 2017.
  15. Khan MO, Park KK, Lee HJ (2005). "Antedrugs: an approach to safer drugs". Curr. Med. Chem. 12 (19): 2227–39. doi:10.2174/0929867054864840. PMID 16178782.
  16. Walker MC, Chang MC (2014). "Natural and engineered biosynthesis of fluorinated natural products". Chem Soc Rev. 43 (18): 6527–36. doi:10.1039/c4cs00027g. PMID 24776946. S2CID 205904152.
  17. "Archived copy". Archived from the original on 2015-05-13. Retrieved 2017-07-16.CS1 maint: archived copy as title (link)
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.